Tender For Agency Empanelment For Electrical Installation, Repair And Maintenance Works For Dewas Municipal Corporation In Dewas, Dewas-Madhya Pradesh

TDR : 55392287

Tender Notice
BOQ

14 Days Left

Dewas , Madhya Pradesh

Tender Brief : Tender For Agency Empanelment For Electrical Installation, Repair And Maintenance Works For Dewas Municipal Corporation In Dewas

Document Fees
₹ 5000 /-

EMD
₹ 90000.0 /-

Tender Value
Refer document

Submission Date
28-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Description
2	Laying of underground cable armoured/ unarmored as per specification in air with approved type of iron clamps complete. 2/3/4 core cable upto 16 Sq.mm
3	Laying of underground cable armoured/uunarmoured as per specification in air with approved type of iron clamps complete. 2/3/4 core cable 25 Sq.mm to 120 Sq.mm
4	Laying of underground cable armored/unarmored as per specification in air with approved type of iron clamps complete. 2/3/4 core cable upto 150 sq mm to 400 Sq.mm
5	Dismantling of H beam pole with pipe, clamp, insulator, stay set, cement concrete, foundation, and making the site clear by refilling the pit to ground level and transporting to area store or any location as required in city
6	Dismantling of PCC pole with pipe, clamp, insulator, stay set, cement concrete, foundation, and making the site clear by refilling the pit to ground level and transporting to area store or any location as required in city
7	Dismantling of R.S joist pole with pipe, clamp, insulator, stay set, cement concrete, foundation, and making the site clear by refilling the pit to ground level and transporting to area store or any location as required in city
8	Dismantling of tubular pole with pipe, clamp, insulator, stay set, cement concrete, foundation, and making the site clear by refilling the pit to ground leveland transporting to area store or any location as required in city
9	Installation of H beam pole of required height with required concreting and inclusive of transportation from store/location of existing pole to the site/location to be installed.
10	Installation of PCC pole of required height with required concreting and inclusive of transportation from store/location of existing pole to the site/location to be installed.
11	Installation of R.S. joist pole of required height with required concreting and inclusive of transportation from store/location of existing pole to the site/location to be installed.
12	Installation of Tubular pole of required height with required concreting and inclusive of transportation from store/location of existing pole to the site/location to be installed.
13	Arm/angle/channel baseplate welding on pole inclusive of all required material
14	Arm/angle/channel baseplate Nut bolt
15	Supply and erection of ring or required shape for mini mast for required no. of flood light
16	Supply and installation of tubular pole in meter
17	Supply and installation of octagonal pole in meter
18	Supply and installation of MS arm in meter of pole for street light
19	Supply and installation of GI arm in meter of pole for street light
20	M20 foundation of tubular/octagonal pole with required Nut bolt and required material according IS standard
21	Erection of pole direct in a ground and muffing with required material, RCC/PCC/Tubular/R.S. joist/ H Beam
22	Earthing of G.I. Plate with charcoal etc complete
23	earthing of copper plate with charcoal etc complete
24	chemical earthing complete
25	supply and laying of G.I. Wire conductor earth electrod 4.0 mm (8.S.W.G.) dia G.I. Wire complete
26	supply and laying of G.I. Strip 25x6 mm
27	Supply and Laying rigid PVC single socket end, non-metallic pipe ISI Marked (IS-4985-2000) class 5 for protection of underground cable/or for water pump delivery side, for water supply complete with necessary clamp coupler,band, tee, Elbow etc. in an approved manner excluding cost of excavation etc laying of Required size pipe of 50 mm.
28	Supply and Laying rigid PVC single socket end, non-metallic pipe ISI Marked (IS-4985-2000) class 5 for protection of underground cable/or for water pump delivery side, for water supply complete with necessary clamp coupler,band, tee, Elbow etc. in an approved manner excluding cost of excavation etc laying of Required size pipe of 25 mm.
29	Supplying and laying GI Pipe 50 mm.
30	Supplying and laying GI Pipe 25 mm.
31	Supply and painting of pole/Arm Iron oxide paint color with labor
32	Supply and painting of pole/Arm Al oxide paint colour with labour
33	Other paint colour as required with color (yellow, Black, Blue etc.)
34	Any wattage of LED flood light installation charges with required ladder or hydra
35	Any wattage of LED Street light charges with required ladder or hydra
36	short point wiring on surface including wire and other material
37	Medium point wiring on surface including wire and other material
38	Long point wiring surface including wire and other material
39	short point wiring in existing conduit including wire and other material
40	Medium point wiring in existing conduit including wire and other material
41	Long point wiring in existing conduit including wire and other material
42	power wiring on surface with 2 x 4 sq.mm cable and casing & caping including required material
43	power wiring on surface with 2 x 6 sq.mm cable and casing & caping including required material
44	power wiring on surface with 2 x 8 sq.mm cable and casing & caping including required material
45	power wiring on surface with 3 x 4 sq.mm cable and casing & caping including required material
46	power wiring on surface3 x 6 sq.mm cable and casing & caping including required material
47	power wiring on surface with 3 x 8 sq.mm cable and casing & caping including required material
48	power wiring 2 x 4 sq.mm in conduit including required material
49	power wiring 2 x 6 sq.mm in conduit including required material
50	power wiring 2 x 8 sq.mm in conduit including required material
51	power wiring 3 x 4 sq.mm in conduit including required material
52	power wiring 3 x 6 sq.mm in conduit including required material
53	power wiring 3 x 8 sq.mm in conduit including required material
54	Circuit wiring with 2 x 2.5 sq mm on surface including required material
55	Circuit wiring 2 x 1.5 sq mm on surface including required material
56	Circuit wiring 2x 1.00 sq mm on surface including required material
57	Circuit wiring 3 x 2.5 sq mm on surface including required material
58	Circuit wiring 3x 1.5 sq mm on surface including required material
59	Circuit wiring 3 x 1.00 sq mm on surface including required material
60	Circuit wiring 2 x 2.5 sq mm in conduit including required material
61	Circuit wiring 2 x 1.5 sq mm in conduit including required material
62	Circuit wiring 2x 1.00 sq mm in conduit including required material
63	Circuit wiring 3 x 2.5 sq mm in conduit including required material
64	Circuit wiring 3x 1.5 sq mm in conduit including required material
65	Circuit wiring 3 x 1.00 sq mm in conduit including required material
66	Main switch repairing including material (63A/100A/200A)
67	LED street light Repairing with all accessories except Driver (Driver shall be provided by DMC)
68	LED street light Repairing with all accessories except PCB (PCB shall be provided by DMC_
69	LED street light Repairing with all accessories except Driver, PCB (Driver, PCB shall be provided by DMC)
70	LED street Light Repairing including Glass, PCB, Driver and other required material 30 w
71	LED street Light Repairing including Glass, PCB, Driver and other required material 48 w
72	LED street Light Repairing including Glass, PCB, Driver and other required material 60 w
73	LED street Light Repairing including Glass, PCB, Driver and other required material 90 w
74	LED street Light Repairing including Glass, PCB, Driver and other required material 120 w
75	LED street Light Repairing including Glass, PCB, Driver and other material required 150 w
76	LED street Light Repairing including Glass, PCB, Driver and other required material 200 w
77	LED Flood Light Repairing including Glass, PCB, Driver and other required material 30 w
78	LED Flood Light Repairing including Glass, PCB, Driver and other required material 48 w
79	LED Flood Light Repairing including Glass, PCB, Driver and other required material 60 w
80	LED Flood Light Repairing including Glass, PCB, Driver and other required material 90 w
81	LED Flood Light Repairing including Glass, PCB, Driver and other required material 120 w
82	LED Flood Light Repairing including Glass, PCB, Driver and other required material 150 w
83	LED Flood Light Repairing including Glass, PCB, Driver and other required material 200 w
84	LED Flood Light Repairing including Glass, PCB, Driver and other required material 250 w
85	Supply and Installation of Three pin top of 16 Amp.
86	Supply and Installation of Three pin top of 6 Amp.
87	Supply and Installation of modular switch of 16 Amp.
88	Supply and Installation of modular switch of 6 Amp.
89	Supply and Installation of modular socket of 16 Amp.
90	Supply and Installation of modular socket of 6 Amp.
91	Supply and Installation MCB Box 4 way (4+12) including required material
92	supply and Installation MCB Box 4 way (8+12) including required material
93	supply and Installation MCB Box 6 way (8+18) including required material
94	supply and Installation MCB Box 8 way (8+24) including required material
95	supply and Installation MCB Box 12 way (8+36) including required material
96	supply and Installation Same board switch and socket - 6 Amp. including required material
97	supply and Installation Same board switch and socket - 16 Amp. including required material
98	Supply and Installation of Modular Box/plate 2 module with required size and shape with switch and socket required
99	Supply and Installation of Modular Box/plate 4 module with required size and shape with switch and socket required
100	Supply and Installation of Modular Box/plate 6 module with required size and shape with switch and socket required
101	Supply and Installation of Modular Box/plate 8 module with required size and shape with switch and socket required
102	Supply and Installation of Modular Box/plate 10 module with required size and shape with switch and socket required
103	Supply and Installation of Modular Box/plate 12 module with required size and shape with switch and socket required
104	Supply and Installation of Modular Box/plate 18 module with required size and shape with switch and socket required
105	Supply and Installation of Modular Box/plate 24 module with required size and shape with switch and socket required
106	D.G. Set Repair / Servicing/ Replacement of Item List
107	D.G. Set servicing and visiting Charge 125 KVA
108	D.G. Set servicing and visiting Charge 15 KVA
109	Kirloskar care premium genuine oil 20 liters can
110	Kirloskar care genuine coolant premix 5 liter can
111	conversion kit from kg 934 to 645
112	FIP calibration/repairs
113	Alternator
114	Engine coolant for water cool diesel engine
115	Control panel AMF panel/manual control panel
116	Radiator with fan
117	24 vdc electric starter with battery
118	Filters (Air, Fuel oil)
119	RO Repair / Servicing/ Replacement of Item List
120	Servicing and visiting charges of RO
121	sediment Filters (PP Filter/spun filter)
122	carbon filters
123	membrane/UF membrane
124	mineral cartridge/Alkaline cartridge
125	TDS controller
126	SMPS/adapter (24v, 36v)
127	RO pump (Booster pump)
128	low pressure switch (LPS), High pressure switch (HPS)
129	Fitting and connectors (Elbow, tee, connector, reducer)
130	Storage tank (if leak)
131	Main switch repairing including material
132	Control panel / Timer Repair / Servicing/ Replacement of Item List
133	MCB/MCCB (Load protection)
134	contactor (3 pole/ 4 pole) and relays required size
135	overload relay (Thermal/Electronic)
136	Digital/Analog Timer (dial and programmable both)
137	push button, selector switch
138	Indicator lamp (R/Y/G LEDS)
139	control fuse/HRC fuse, cable Lugs
140	Panel enclosure, mounting plate/Dinrail
141	supply and installation of 32 amp. Cut out
142	supply and installation of 63 amp. Cut out
143	supply and installation of 100 amp. Cut out
144	supply and installation of 200 amp. Cut out
145	Supply and installation of MCB 6-to-32-amp singal pole
146	Supply and installation of MCB 6-to-32-amp double pole
147	Supply and installation of MCB 63 amp singal pole
148	Supply and installation of MCB 63-amp double pole
149	Supply and installation of MCB 63-amp triple pole
150	Supply and installation of MCB 63 amp TPN
151	Supply and installation of MCCB 100-amp TPN as IS Standard
152	Supply and installation of MCCB 200-amp TPN as IS Standard
153	Supply and installation of MCCB 400-amp TP as IS Standard
154	Supply and installation of MCCB 630-amp TP as IS Standard
155	Supply and installation of MCCB 800-amp TP as IS Standard
156	Supply and Installation of 2 pole RCCB SPN
157	Supply and Installation of RCCB 4 pole RCCB TPN
158	Supply and Installation copper busbars of 32 amp. For single phase supply
159	Supply and Installation copper busbars of 63 amp. For 3 phase supply
160	Supply and Installation copper busbars of 100 amp. For 3phase supply
161	Supply and Installation copper busbars of 200 amp. For 3phase supply
162	Supply and Installation of Lugs up to 32 sq mm for cable.
163	Supply and Installation of Lugs 35 sq mm for cable.
164	Supply and Installation of Lugs 70 sq mm for cable.
165	Supply and Installation of Lugs 150 sq mm for cable.
166	Supply and Installation of Lugs 300 sq mm for cable.
167	Speaker, Mixer, Audio amplifier Repair / Servicing/ Replacement of Item List
168	Speaker cone/diaphragm
169	Voice coil, cross over
170	spider/suspension/ dust cop
171	Magnet
172	cabinet/Box/Wooder/fiber
173	Channel favors (slider potentiometers
174	Rotary knobs (Bass, mid, treble, gain control)
175	Input (XLR, 6.35 mm jac, RCA), Output (main out, Aux Out, Montier Out)
176	Internal power supply/adapter
177	Display and PCB
178	power transistors/misfits
179	Pre amp Ics (TL072, NE5532), Power Ics (TDA, STK seris
180	capacitor (Filter capacitor)
181	Resistors and diodes
182	Transformer (Step-down/Toroidal)
183	SMPS power supply
184	heat sink and cooling fan
185	Input/output connectors (RCA, 6.35 mm) and volume/ton control pots)
186	Fan Repair / Replacement of Item List
187	Motor winding
188	Capacitor 2.5 rF - 4 rF
189	regulator
190	Fan blades
191	Height adjustment with required rod/pipe
192	Repair of Exhaust fan 150 mm
193	Repair of Exhaust fan 300 mm
194	Repair of Exhaust fan 450 mm
195	Air cooler Repair / Replacement of Item List
196	cooler motor
197	water pump
198	capacitor (for motor )
199	switches
200	Regulator (Speed contool)
201	wiring set, Indicator, light
202	Fan Blade/Blower
203	Swing motor
204	water tank (if leak)
205	body panels (plastic/metal body)
206	castor wheels/stand and grass
207	Water cooler Repair / Servicing/ Replacement of Item List
208	cooling system - compressor
209	condenser coil
210	Eva poratar coil
211	Refrigerant Gas (R22, R134, R290)
212	Overload protector (OCP)
213	SMPS/Power supply
214	Fan Moter, water pump
215	storage tank
216	supplying and laying Copper Wire Bundle Heavy Duty L-90 Mtr. (300 Feet), 1 mm.
217	supplying and laying Copper Wire Bundle Heavy Duty L-90 Mtr. (300 Feet), 1.5 mm.
218	supplying and laying Copper Wire Bundle Heavy Duty L-90 Mtr. (300 Feet), 2.5 mm.
219	supplying and laying 23/76 Wire Bundle Copper Heavy Duty L-90 Mtr-(300 Feet),.
220	supplying and laying 6 sq. mm 2 core Copper Cable unarmored
221	supplying and laying 4 sq. mm 2 core Copper Cable unarmored
222	supplying and laying 2.5 sq. mm 2 core Copper Cable unarmored
223	supplying and laying 1.5 sq. mm 2 core Copper Cable unarmored
224	supplying and laying 1 sq. mm 2 core Copper Cable unarmored
225	supplying and laying 6 sq. mm 3 core Copper Cable unarmored
226	supplying and laying 4 sq. mm 3 core Copper Cable unarmored
227	supplying and laying 2.5 sq. mm 3 core Copper Cable unarmored
228	supplying and laying 1.5 sq. mm 3 core Copper Cable unarmoured
229	supplying and laying 1 sq. mm 3 core Copper Cable unarmored
230	supplying and laying 6 sq. mm 4 core flate copper Cable unarmored
231	supplying and laying 4 sq. mm 4 core flate copper Cable unarmoured
232	supplying and laying XLPE INSULATED 25 Sq.mm Cable 4 Core Aarmoured
233	supplying and laying XLPE INSULATED 16 Sq.mm Cable 4 Core armoured
234	supplying and laying XLPE INSULATED 16 Sq.mm Cable 2 Core Armouned.
235	supplying and laying XLPE INSULATED 16 Sq.mm Cable 2 Core unarmored
236	supplying and laying XLPE INSULATED 16 Sq.mm Cable Single Core Non-armoured
237	supplying and laying XLPE INSULATED 10 Sq.mm Cable 4 Core armoured .
238	supplying and laying XLPE INSULATED 10 Sq.mm Cable 2 Core armoured
239	supplying and laying XLPE INSULATED 10 Sq.mm Cable 2 Core Un armoured
240	supplying and laying XLPE INSULATED 10 Sq.mm Cable Single Core un armoured
241	supplying and laying XLPE INSULATED 6 Sq.mm Cable 4 Core armoured
242	supplying and laying XLPE INSULATED 6 Sq.mm Cable 4 Core un armoured
243	supplying and laying XLPE INSULATED 6 Sq.mm Cable 2 Core armoured
244	supplying and laying XLPE INSULATED 6 Sq.mm Cable 2 Core Un armoured
245	supplying and laying XLPE INSULATED 6 Sq.mm Cable Single Core un armoured
246	supplying and laying XLPE INSULATED 4 Sq.mm Cable 3 Core Non-armoured
247	supplying and laying XLPE INSULATED 4 Sq.mm Cable 2 Core Non-armoured
248	supplying and laying XLPE INSULATED 2.5 Sq.mm Cable 3 Core Non-armoured
249	supplying and laying XLPE INSULATED 2.5 Sq.mm Cable 2 Core Non-armoured
250	supplying and laying XLPE INSULATED 1.5 mm Cable 3 Core Non-armoured
251	supplying and laying XLPE INSULATED 1.5 mm Cable 2 Core Non-armoured
252	supplying and laying XLPE INSULATED 1 mm Cable 3 Core Non-armoured
253	supplying and laying XLPE INSULATED 1 mm Cable 2 Core Non-armoured
254	supplying XLPE INSULATED 35 sq. mm 4 core Copper Cable armoured
255	supplying XLPE INSULATED 70 sq. mm 4 core Copper Cable armoured
256	supplying XLPE INSULATED 150 sq. mm 4 core Copper Cable armoured
257	supplying XLPE INSULATED 150 sq. mm 3.5 core Copper Cable armoured
258	supplying XLPE INSULATED 300 sq. mm 4 core Copper Cable armoured
259	supplying XLPE INSULATED 300 sq. mm 3.5 core Copper Cable armoured
260	Supply and installation of Stay Wire and their accessories with complete set
261	Fixing of Fluorescent Tube fitting on wall/ceiling on wooden round block with anchor fastener/Jook & necessary material including connection with 3 core flexible wire etc. complete as required.
262	Dismantling of existing light/Fan/Bell/Socket out let point on separate board/Wiring with insulated wire in casing/conduit/Batten complete with fitting and accessories
263	Making the site clear of the dismantling installation by refilling the hole with cement mortar & finished with paint gittie sand replacing to match the color of wall & ceilling.
264	Dismantling o existing socket outlet point on same board in any system of wiring
265	Dismantling the existing armored/unarmored cable or single core wires of submain,main,circuitinany system of wiring including recoiling.
266	Dismantling of existing underground cable safely with its accessorie sand refilling the trench to ground level including recoiling of dismentalled cable.
267	Dismantling of D.F. Boarded. Switch, T.P.&T.P.N.Switch or D.B.of any size complete with board or angle/flair on frame and making site clear including there filling hole & repainting to match colour of wall.
268	Dismantling the existing Ceiling/exhaust/cabin fan with complete accessories and making the site clear.
269	Dismantling of existing water tight fluorescent tube fitting/M.V. Lamp fitting with making the site clear.
270	Providing recess in brick wall suitable for erection of exhaust fan up to 450 sweep complete with grouting of nut bolts, plastering and colour wash to match the colour of wall.
271	1 For wall thickness up to 9\\"
272	2 For wall thickness up to 15\\"
273	3 For the stone wall thickness up to 15\\"
274	Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long copper tube having single prongat top with 85 mm dia 3mm thick copper base plate including holes complete as required.
275	Rivetting / Sweating and soldering of copper/G.I.Tape(with another copper/G.I.Tape,base of finialor any other metallic object ) as required.
276	Providing and fixing copper tape 20mmX3mm thick on parapet and surface of wall of lightening conductor as required(for Horizontal runs )
277	Providing and fixing copper tape 20mmX3mm thick on parapet and surface of wall of lightening conductor as required (forVertical runs )
278	Supplying and drawing PVC insulated copper cable(Earth Continuity Conductor) of Green colour FR with copper multi strand conductor ISI marked in existing conduit along with other wires as required as per specification :
279	4 Sq mm
280	6 Sq mm.
281	10 Sq mm.
282	16 Sq mm
283	25 Sq mm
284	Labour rate for point wiring a Light/Fan/Twin control light/Socket outlet on separate board/Call bell Point in(open) surface rigid steel conduit system.
285	Labour rate for point wiring a Light/Fan/Twin control light/Socketoutlet on separate board/Call bell Point in recessed/concealed rigid steel conduit system
286	Labour rate for fixing rigid steel conduit insurface/concealed conduit wiring system, as per specification .
287	20 mm Conduitmeter
288	25 mm & 32 mm Conduit
289	40 mm & 50 mm Conduit
290	Labour rate for rewiring a Light/Fan/Twin control light/Socket outlet on separate board/Callbell Point in rigid steel/rigid PVC non metalic conduit in (open) surface conduit wiring system.
291	Labour rate for rewiring a Light/Fan/Twin control light/Socket outlet on separate board/Call bell Point in rigid steel/rigid PVC non metalic conduit in recessed/concealed conduit wiring system.
292	Labour rate for fixing rigid PVC conduit as per specification in recessed/concealed conduit wiring system.
293	20 mm Conduit
294	25 mm & 32 mm Conduit
295	Labour rate for drawing cables in existing rigid steel conduit (surface or recessed/concealed )
296	2.5 sq mm / 4 sq mm / 6 sq mm
297	10 sq mm / 16 sq mm / 25 sq mm
298	Supplying and fixing fan clamps of 16mm dia steel bar as per specification complete :-
299	For stone slab roof \\"J\\" Type hook
300	For R.C.C. Slabs / Beams
301	For existing old R.C.C. Slabs / Beams
302	Fixing of fan Regulator on existing switch board in position with necessary material connection etc.complete as required.
303	Erection of exhaust fan/wall bracket fan/cabin fan in position with required PVC cable,rawl bolts etc.complete including connection sand making wall surface good.
304	Supplying and fixing down rod of MS pipe for ceiling fan including threading, painting, making holes etc. as required complete
305	Providing and fixing wooden board of suitable size(maxinum12\\"X18\\")for fixing of house service meter with necessary material sand connection testing etc. complete as per specification for Single phase meter or Three phase meter
306	Providing & refilling of wood wool/Khaspads of normal size cooler panels 3 Nos including scraping of old paint,making surface even,painting with red oxide primer & two coats of paint of required shade including fixing new wiremesh complete.
307	Servicing & overhauling of cooler fan motor,pump including replacemnt of distribution & delivary pipes,PVC elbows,painting etc.as reqd.complete with nacessary material & labour including replacement of connection leads
308	Rewinding of fans by copper enamelled wire of suitable gauge including all required material,insulation,varnishing,connection leads,oiling.greasing etc complete with testing including dismentalling & refitting of fan at site.Scrap old material is not returnable to the department.
309	Ceiling Fan 1400 mm sweep new model / Exhaust Fan 380 mm sweep
310	Ceiling Fan 1200 mm sweep new model / Exhaust Fan 300 mm sweep
311	Fresh Air Fan upto 300mm sweep/WallBracket/Cabin Fan 400mm sweep
312	Cleaning, overhauling, servicing of ceiling/Exhaust/Wall bracket fan by applying grease & oil, including testing with mounting/Hanging arrangement including replacement of safty pins, check nuts ,locknut , nut bolts etc. making perfect allignment & refitting at site as required.
313	Water proofing tape/ flex tape/ butyl tape roll (1.52 meter or above)
314	Supplyinganderectionofwater tight terminalboxof14SWGM.S. Sheet 4mmthickboxof requiredsize 30x20x15 Cms.
315	Cable jointing kit upto 25 sqmm Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Madhya Pradesh Tenders

Electrical Industry Tenders

Electrical Work Tenders

AMC of Electric Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Agency Empanelment For Electrical Installation, Repair And Maintenance Works For Dewas Municipal Corporation In Dewas, Dewas-Madhya Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Agency Empanelment For Electrical Installation, Repair And Maintenance Works For Dewas Municipal Corporation In Dewas, Dewas-Madhya Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us