|
| 1 | Charpoy GI Pipe with ply top (FD-220) |
| 2 | (Removing of old U/S plywood and S&F new 12mm thickness plywood top of size 1980x900 mm exterior grade BWR type (Nos of ply 7) ISI marked fixed with flat/dome head MS galvanished iron carriage bolts. The edge of plywood shall be smoothened alround & corner shall be rounded to a radious of 1cm iron carriage, 10Nos of round headed bolts with nut & washer of size 5x75mm after drilling the holes at equal distance on rails (03Nos on each long rail & 02Nos on each Short Rails) & all as directed by the Engr-in-Charge/GE & as per shown on drg |
| 3 | Removing of Old/unsv Long rails from charpoy GI Pipe and S&F of new long rail made out of GI Pipe 32mm nominal dia Med Grade duly threaded at both end upto 45mm & all as directed by the Engr-in-ChargeNote : U/S long rails be converted into 01short rail & 01leg & measured in Sch No. 18(c) & 18(d) |
| 4 | (c) Removing of Old/unsv Short rails from charpoy GI Pipe and fixing only Short rail retrieved and made out from schedule No 18(b) duly threaded at both end upto 45mm & all as directed by the Engr-in-ChargeNote: U/S Short rails be converted into 01leg and measured in Sch 18 (d) |
| 5 | (d) Removing of Old/unsv Legs from charpoy GI Pipe and fixing only legs retrieved made out from old long rails/short rails, retrieved under item Sl No 18 (b) & 18 (c) here in before duly threaded at one end upto 45mm and all as directed by the Engr-in-Charge |
| 6 | (e) Re-threading of existing loose long rails, short rails and legs of 32mm dia GI Pipe upto 45mm and assembling to make a charpoy frame complete as shown on drawing and as directed by Engr-in Charge/GE Note: Old existing loose long rails, short rails and legs shall be issued to the Contractor for re-threading and assembling it to make a charpoy frame |
| 7 | (f) Removing of Old/unsv broken existing elbow of charpoy GI pipe and S&F new elbow GI 03Way 32mm Med Grade ISI marked of existing shape and size complete all as specified & directed |
| 8 | (g) Removing of Old/unsv broken existing check nut of charpoy GI pipe and S&F new elbow check nut 32mm Med Grade ISI marked of existing shape and size complete all as specified & directed |
| 9 | Table dinning ORs Aluminum Top (FD-165) |
| 10 | Replacement of old unserviceable/ broken/ damaged old top of table dinning ORs with new top made of 18/19mm thick MDF board Exterior Grade commercial complete all as specified and shown on drawing.Make: Century/greenply/ASIS. as directed by engr-in-charge. |
| 11 | Replacement of old unserviceable/ broken/ damaged components i.e. legs, top long rails, top short rails, top stiffener and bottom stiffener with new components i.e. legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm square mild steel pipe, 1.6mm thick, complete all as specified and shown on drawing.and as directed by engr-in-charge. |
| 12 | Welding at joints of 25mm Square mild steel pipe, 1.6mm thick where ever required to repair the table dining ORs, complete all as specified and shown on drawing.and as directed by engr-in-charge. |
| 13 | Replacement of unserviceable/ broken/ damaged rubber shoes from legs of Table dining ORs with new rubber shoes of best quality matching with the existing shoes, complete all as specified and as directed. |
| 14 | Preparation of the existing, decorated/ undecorated surfaces of Table dining ORs and spray painting with two coats of synthetic enamel black paint of approved quality, complete all as specified and directed. |
| 15 | Almirah Medium steel with shelves (FD-242 and FD-1032) |
| 16 | Replacement of old existing broken/ unserviceable locks of any description and in any position with new locks with double keys, fixing with suitable screws/ nuts including repair of locking device, complete all as specified and shown in the drawings. Make :Harrison / Godrej / Link |
| 17 | Replacement of old existing broken/ unserviceable door handles of Almirah, size 100 mm long, mild steel chromium plated of approved make, ISI marked, best quality, complete with nuts and pins, complete all as specified and shown in the drawings. |
| 18 | Replacement of old unserviceable/ broken/ damaged existing hooks from almirah with new hook of best quality, fixed in vertical channel below of each shelves at equal space, complete all as specified and shown in the drawings. |
| 19 | Replacement of old unserviceable/ broken/ damaged shelves with new shelves made out of 1.0mm plain black sheet, complete all as specified and shown on drawing. |
| 20 | Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.0mm plain black sheet, complete all as specified and shown on drawing including welding of legs. |
| 21 | Replacement of old unserviceable/ broken/ damaged hinges from shutters with new hinges, complete all as specified and as directed. |
| 22 | Replacement of old existing broken/ unserviceable locking devices of any description and in any position with new locking devices, three ways, fixing with suitable screws/ nuts complete all as specified and shown in the drawings. |
| 23 | Preparation of the existing decorated surfaces of the steel Almirah with shelves by removing of all dents and filling with putty and spray painting with two coats of synthetic enamel Silver Grey (externally) And Smoke Grey (Internally) paint of approved quality , complete all as specified and directed. |
| 24 | Chair CB Steel with arms [FD-75(M)] |
| 25 | Replacement of old unserviceable/ broken/ damaged existing seats with new seats of existing size with 50mm thick foam cushion pasted with suitable adhesive over 12mm thick plywood fixed on 2nd class HW seat & Frame surface covered with letherite rexin over 12mm thick & screwewd to track rail as directed by engr-in-charge . |
| 26 | Replacement of old unserviceable/ broken/ damaged existing back with new back of existing size with 50mm thick foam cushion pasted with suitable adhesive over 12mm thick plywood fixed on 2nd class HW seat & Frame surface covered with letherite rexin over 12mm thick & screwewd to track rail as directed by engr-in-charge . |
| 27 | Replacement of old unserviceable/ broken/ damaged existing arms with new back of sheesham wood, 1st class hard wood including painting to wooden portion with two coats of synthetic enamel black paint, complete all as specified and shown on drawing. |
| 28 | Replacement of old unserviceable/ broken/ damaged existing PVC shoe / caps of best quality complete all as specified and shown on drawing. |
| 29 | Providing new mild steel flat iron 30x3m as stiffener under the seat, duly welded both ends to frame, complete all as specified and shown on drawing. |
| 30 | Preparation of the existing, old decorated surfaces of the chair CB steel with arms including welding at joints as required and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 31 | Chair CB Steel without arms [FD-75(M) |
| 32 | Replacement of old unserviceable/ broken/ damaged existing seats with new seats of existing size with 50mm thick foam cushion pasted with suitable adhesive over 12mm thick plywood fixed on 2nd class HW seat & Frame surface covered with letherite rexin over 12mm thick & screwewd to track rail as directed by engr-in-charge . |
| 33 | Replacement of old unserviceable/ broken/ damaged existing back with new back of existing size with 50mm thick foam cushion pasted with suitable adhesive over 12mm thick plywood fixed on 2nd class HW seat & Frame surface covered with letherite rexin over 12mm thick & screwewd to track rail as directed by engr-in-charge . |
| 34 | Replacement of old unserviceable/ broken/ damaged existing PVC shoes / caps of best quality complete all as specified and shown on drawing. |
| 35 | Propviding new mild steel flat iron 30x3m as stiffener under the seat, duly welded both ends to frame, complete all as specified and shown on drawing. |
| 36 | Preparation of the existing, old decorated surfaces of the chair CB steel without arms including welding at joints as required and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 37 | Almirah Large steel (FD-67 and FD-1031) |
| 38 | Replacement of old existing broken/ unserviceable locks of any description and in any position with new locks with double keys, fixing with suitable screws/ nuts including repair of locking device, complete all as specified and shown in the drawings. Make : Harrison / Godrej / Link |
| 39 | Replacement of old existing broken/ unserviceable door handles of Almirah, size 100 mm long, mild steel chromium plated of approved make, ISI marked, best quality, complete with nuts and pins, complete all as specified and shown in drawing. |
| 40 | Replacement of old unserviceable/ broken/ damaged existing hooks from almirah with new hook of best quality, fixed in vertical channel below of each shelves at equal space, complete all as specified and directed. |
| 41 | Replacement of old unserviceable/ broken/ damaged shelves with new shelves made out of 1.0mm plain black sheet, complete all as specified and shown on drawing. |
| 42 | Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.6mm plain black sheet, including welding of legs, complete all as specified and shown on drawing |
| 43 | Replacement of old unserviceable/ broken/ damaged hinges from shutters with new hinges, complete all as specified and shown in the drawings. |
| 44 | Replacement of old existing broken/ unserviceable locking devices of any description and in any position with new locking devices, three ways, fixing with suitable screws/ nuts complete all as specified and shown in the drawings. |
| 45 | Preparation of the existing decorated surfaces of the steel Almirah with shelves by removing of all dents and filling with putty and spray painting with two coats of synthetic enamel of siver grey paint ( Externally) and Smoke Grey (Internally)of approved quality , complete all as specified and directed. |
| 46 | Locker bed side steel ( FD-27, FD-267 and FD-1029) |
| 47 | Replacement of old un-serviceable/ broken/ damaged existing door handles of steel locker 100 mm long with new mild steel chromium plated of approved make, with screws/ nuts and pins, complete all as specified and shown on drawing. |
| 48 | Replacement of old unserviceable/ broken/ damaged existing hasp and staple of any description and in any position with new hasps and staple chromium plated 100 mm long fixing with suitable screws/ nuts including repair of locking device, complete all as specified and shown on drawing. |
| 49 | Replacement of old unserviceable/ broken/ damaged shelves with new shelves made out of 1.0mm mild steel plain black sheet, complete all as specified and shown on drawing. |
| 50 | Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.0mm mild steel plain black sheet, including welding of legs, complete all as specified and shown on drawing. |
| 51 | Replacement of old unserviceable/ broken/ damaged bottom sheet with new bottom sheet, 1.0mm mild steel plain black sheet, including welding, complete all as specified and shown on drawing. |
| 52 | Preparation of the existing, decorated surfaces of the locker bed side steel by removing of all dents and filling with putty and spray painting with two coats of synthetic enamel OG paint of approved quality on internal and external surface, complete all as specified and directed. |
| 53 | Table office Officer steel (FD-84 and 306) |
| 54 | Replacement of unserviceable/ broken/ damaged old top of table office officer steel with new top made of pre-laminated MDF Board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing and as directed. Make: Greenply/Century/ ASIS. |
| 55 | Replacement of unserviceable/ broken/ damaged old drawer of Table office officer steel with new drawer made out of 1.0mm plane mild steel plain black sheet, complete all as specified and shown on drawing. |
| 56 | Adjustment to existing drawer for easy functioning including denting/ welding and repairing to bottom channel for drawer, complete all as specified and as directed. |
| 57 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 58 | Replacement of unserviceable/ broken/ damaged rubber shoes from legs of Table office officer steel with new rubber shoes of best quality matching with the existing shoes, complete all as specified and as directed. |
| 59 | Preparation of the existing, decorated/ undecorated surfaces of Table office officer steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 60 | Table office clerk steel (FD-84 and 1004) |
| 61 | Replacement of unserviceable/ broken/ damaged old top of table office clerk steel with new top made of pre-laminated MDF board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing. Make: Greenply/Century/ASIS. |
| 62 | Replacement of unserviceable/ broken/ damaged old drawer of Table office clerk steel with new drawer made out of 1.0mm plane galvanised iron sheet, complete all as specified and shown on drawing. |
| 63 | Adjustment to existing drawer for easy functioning including denting/ welding and repairing to bottom channel for drawer, complete all as specified and as directed. |
| 64 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm Square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 65 | Replacement of unserviceable/ broken/ damaged rubber shoes from legs of Table office clerk steel with new rubber shoes of best quality matching with the existing shoes, complete all as specified and as directed. |
| 66 | Preparation of the existing, decorated/ undecorated surfaces of Table office clerk steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 67 | Table Computer |
| 68 | Replacement of unserviceable/ broken/ damaged old top with new top made of pre limenated mdf board 18mm exterior grade with bedding patty, complete all as specified. |
| 69 | Replacement of old unserviceable/ broken/ damaged old drawer including chennel from mdf board with new drawer including chennel from partical board, complete all as specified and shown on drawing. |
| 70 | Replacement of old unserviceable/ broken/ damaged old keyboard holder board from mdf board with new keyboard holder board from partical board, complete specified and shown on drawing. |
| 71 | Preparation of old base frame with new base frame made by MS Tube 25mm x 25mm sqare pipe welded painting and complete as specified. |
| 72 | Chair Revolving |
| 73 | Replacement of unserviceable/ broken/ damaged old seat with back made with foam cousion with seat with back made with foam cousion with Rexin first class, size 32mm, complete all as specified and shown in drawing. |
| 74 | Replacement of unserviceable/ broken/ damaged old arms left and right with new arms left and right made of cost iron, complete all as specified and shown in drawing. |
| 75 | Replacement of old unserviceable/ broken/ damaged base and wheel, with new base and wheel including welding, complete all as specified and shown on drawing. |
| 76 | Replacement of old unserviceable/ broken/ damaged adjustment liver road with new adjust liver road including welding, complete all as specified and shown on drawing. |
| 77 | Table steel 900x900x760mm (FD-1009) |
| 78 | Replacement of unserviceable/ broken/ damaged old top of table steel with new top made of pre-laminated MDF board, one side teak faced exterior and one side balancing white, grade BWR, 18/19 mm thick including PVC beading all around the top, complete all as specified and shown in drawing. Make: Greenply/ Century/ASIS. |
| 79 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm Square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 80 | Replacement of unserviceable/ broken/ damaged rubber shoes with new rubber shoes of best quality matching with the existing shoes, complete all as specified and shown in drawing. |
| 81 | Preparation of the existing, decorated/ undecorated surfaces of Table steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 82 | Table steel 900x600mm without drawer (FD-1007) |
| 83 | Replacement of unserviceable/ broken/ damaged old top with new top made of pre-laminated MDF board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing. Make: greenply/ century/ASIS. |
| 84 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 85 | Replacement of unserviceable/ broken/ damaged rubber shoes with new rubber shoes of best quality matching with the existing shoes, complete all as specified and shown in the drawing. |
| 86 | Preparation of the existing, decorated/ undecorated surfaces of table steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 87 | Table steel 900x600mm with drawer (FD-1008) |
| 88 | Replacement of unserviceable/ broken/ damaged old top of table steel with new top made of pre-laminated MDF board, one side teak faced exterior and one side balancing white, grade BWR, 18/19 mm thick including PVC beading all around the top, complete all as specified and shown in drawing. Make: century/ Greenply/ ASIS. |
| 89 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 90 | Replacement of unserviceable/ broken/ damaged rubber shoes with new rubber shoes of best quality matching with the existing shoes, complete all as specified and shown in drawing. |
| 91 | Replacement of unserviceable/ broken/ damaged rubber locks with new locks from the locking assembly, double keys, fixing with suitable screws/ nuts including repair of locking device, complete all as specified and shown in drawing. |
| 92 | Preparation of the existing, decorated/ undecorated surfaces of table steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 93 | Bed Hard MAP |
| 94 | Dismantling of old and US plywood top of bed and S&F new plywood grade BWR,12mm thick (ISI marked)with screws. Note: Contractor has to produce purchase voucher directly from company, (Bar code required) (make:- century/archid/greenply). |
| 95 | Taking out old unserviceable plywood of head board and S&F new prelaminated MDF board exterior grade as per drg. Complete all as specified and directed. |
| 96 | Taking out old unserviceable plywood of foot board and S&F new prelaminated MDF board exterior grade as per drg. Complete all as specified and directed |
| 97 | Teapoy verandah steel (FD-383) |
| 98 | Replacement of unserviceable/ broken/ damaged old top with new top made of pre-laminated MDF board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing. Make:Century/ Greenply/ ASIS. |
| 99 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm Square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 100 | Replacement of unserviceable/ broken/ damaged rubber shoes with new rubber shoes of best quality matching with the existing shoes, complete all as specified and shown in drawing. |
| 101 | Preparation of the existing, decorated/ undecorated surfaces of table steel and spray painting with two coats of synthetic enamel White paint of approved quality, complete all as specified and directed. |
| 102 | Chair School Steel with hand board |
| 103 | (a) Removing of unserviceable/broken PVC seat and S&F new PVC seat of fitted with screws of existing shape and size complete all as specified & directed |
| 104 | (b) Removing of old unsv existing hand board from chair school with hand board and S&F new hand board of size as per drg including of suitable hinges fixed as in repair as original shape and drg, hand board shall be 18mm thick prelaminated partical board as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the hand board shall be of 4mm thick teak wood. All exposed faces of timber shall be treated with french polish as directed |
| 105 | Table Bed Side Map |
| 106 | (a) Removing of old unservicable top from table bed side map and S&F new top of existing size made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size fixed with screws with 4mm thick teak wood edging all round the top . All exposed faces of timber shall be treated with french polish all as directed |
| 107 | (b) Removing of old unservicable small drawer and knobs and providing of new small drawers of existing shape and size made of 18/19mm prelaminated MDF board of shade bavarian beech exterior Grade ISI marked of existing size with 4mm thick teak wood edging on open edges for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs, MS powder coated telescopic channel as per drg. complete all as specified and directed. All exposed faces of timber shall be treated with french polish all as directed. |
| 108 | (c) Removing of old U/s large drawer and knobs and providing of new large drawers of MDF board 18/19mm thick board exterior grade for sides as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed and 6mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg.,of existing shape and size complete all as specified and directed |
| 109 | (d) Removing of old U/s back of table bed side MAP and S&F 18mm thick MDF board BWR, exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed of existing shape and size complete all as specified and directed |
| 110 | (e) Removing of old U/s sides of table bed side MAP and S&F 18mm thick MDF board BWR, exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed of existing shape and size complete all as specified and directed |
| 111 | (f) French polishing with high class finish on wooden surface and synthetic enamel Paint of black colour on steel frame including preparation by proper sand papering. All as specified & directed by Engineer-in-Charge and all as per drg. |
| 112 | Re-canning of chairs Varandha |
| 113 | (a) Removing of old broken plastic cane and recaning of chair varandah with & including new plastic cane of 04/05mm semi round, white colour, best quality of approved including painting with two coats of white synthetic enamelled paint on entire steel/iron surfaces of chair before recaning & including provn of new PVC shoes 20mm dia at bottom of legs after taking out old shoes all as specified including all material & labour, canning shall be done in Matt pattern |
| 114 | M&L Spray painting two coat of synthetic enamel Paint of black colour on old painted surface with high class finish including necessary scrapping, denting & to smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/ holes/bore holes etc with paste filler to under mentioned items complete all as specified & directed by Engr-in-charge |
| 115 | Table Bed side Steels |
| 116 | Trestle store room steel |
| 117 | Chair School Steel with hand board |
| 118 | Note:- The contract sum shall be arrived at after deduction of amount of Sch of credit. Please Enable Macros to View BoQ information |
