|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqmon plan), including dressing of side sand ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.including all labour charges and applicable taxes |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including all applicable taxes etc., complete including all labour charges and applicable taxes |
| 3 | Laying of pathway by using Stone for pitching 15 cm x 22.5 cm and 15 cm thick (Approx) in Lime mortar 1:2 after dressing and cutting and fixed to required level and slope for easy draining of rainwater including cost of materials, labour charges, loading and unloading charges etc complete item of work, complete and the charges are also including all applicable taxes etc., complete all as per the directions of the department officials |
| 4 | Pointing on stone work with lime motor (1:2) including cost of materials, labour charges, loading and unloading charges etc complete item of work, complete and the charges are also including all applicable taxes etc., complete all as per the directions of the department officials |
| 5 | Laying of Kerb with neatly dressed stone of cross sectional size 0.23 x 0.30 fixed in lime mortar 1:2 including conveyance of all materials, labour charges, placing tc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 6 | Laying, spreading of WBM Pathway using compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. including conveyance of all materials ,laour charges, placing etc., completeand the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 7 | Laying of PCC in 1:3:6(1Cement:3coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources including conveyance of all materials, laour charges, mixing, placing, spreading, ramming, consolidation and proper curing etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 8 | Steel reinforcement for R.C.C. work for extension of slab to be used as interpretation center using Mild steel and Medium Tensile steel bars of sizes as specified in the drawing attached including conveyance of all materials, labour charges, straightening, cutting, bending, placing in position and binding etc., complete and the charges are also including all applicabletaxes etc., complete all as per the directions of department officials |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns including conveyance of all materials, laourcharges,etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 10 | Laying Reinforced cement concrete work in beams, suspended floors, roofs with 1:1.5:3 (1 cement :1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) including conveyance of all materials, laour charges, mixing, placing, spreading, ramming, consolidation and proper curing etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of departmentofficials |
| 11 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift including laour charges, ramming, consolidation etc., complete and the charges are also includingallapplicabletaxesetc.,completeallasperthe directions of department officials |
| 12 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including all applicable taxes etc., complete including all labour charges and applicable taxes |
| 13 | Provision for Brick work for construction of steps, ramps in proper slope, and walls with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in : Cement mortar 1:4 (1 cement : 4 coarse sand) including conveyance of all materials, labour charges, mixing, placing and proper curing etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 14 | Provision for 20 mm cement plaster finished with mix : 1:4 (1 cement: 4 fine sand) including conveyance of all materials, laour charges, mixing, placing and proper curingetc., complete and the charges arealsoincluding all applicable taxes etc., complete all as per the directions of department officials |
| 15 | Provision for flooring with Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laidon 12mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including including conveyance of all materials, laourcharges, placing, rubbing and polishing etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 16 | Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having water absorption less than0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge |
| 17 | Demolition of Brick partition wall manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsanddados,over12mmthickbedofcementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 19 | Painting of doors and windows in old toilet block with synthetic enamel paint after thorough cleaning and applying primer of approved brand including conveyance of all materials, labourcharges, etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 20 | Provision for removal of damaged terrace floor tiles of 10mm to 25mm thickness manually including disposal of unserviceable material including labour charges and all applicable taxes as per the direction of department officials |
| 21 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4(1cement:4coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. including conveyance of all materials, labourcharges,etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 22 | Providing of Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles..1UsingR1series with frame (33 mm &above ) x (35 mm & above) & sash/mullion (33 mm & above) x (50 mm & above). including conveyance of all materials, labourcharges,etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 23 | Erection and fixing of roof sheetby using50 x 50mm MS Hollow tube welded and covered with corrugated GI Sheet over it fixed to the frame as per design in drawing attached including conveyance of all materials, labour charges for fixing, painting charges of frame, scaffolding charges etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 24 | Colour washing with 2coats of textured exterior paint of required shade over priming coat of exterior primer applied including conveyance of all materials, labourcharges, etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 25 | Fixing hand rail for ramps using stainlesssteel (Grade304) railing made of Hollow tubes including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge |
| 26 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath,court yard, multimodal slocation etc., laidon 20mm thickbase of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge |
| 27 | Painting grills with 2coats of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade over an under coat of suitables hade with ordinary paint of approved brand and manufacture including conveyance of all materials, labour charges, etc., complete and the charges are also including all applicable taxes etc., complete all as per the directions of department officials |
| 28 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarses and, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge |
| 29 | ProvisionSupplyinganderectinginpositionof500liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No. (b) Media 11054 No.Vessel with 20 nb Multiport Valve (with Media PubbleandFine Sand and Activated Carbon Filling) set(c)Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / SinglePhase–1No.(e) Membrane 40x40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., LowPressureSwitch-1No.,LevelSwitch-1No.& Necessary CPVC Pipes and Fittings. The system shallbe provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc including all charges plumbing and electricals works where ever necessary and all applicable taxes etc., complete |
| 30 | Purchase and supply of Furniture and fixtures for Baby careroom ,Clockroom ,Publication counter, Janitor room, VIP lounge room 1) Providing and supplying hot and cold water dispenser with inbuilt cooling and heating system, complete with all accessories and fittings. |
| 31 | Providing and fixing wall-mounted liquid soap dispenser of approved make, including all fixtures. |
| 32 | Providing and fixing automatic sensor-based paper towel dispenser, battery/electric operated, complete. |
| 33 | Supplying alcohol-based hand sanitizer (200 ml capacity) of approved quality and brand. |
| 34 | Providing and fixing wooden diaper changing table of 800 mm height from ground level, finished smooth, complete. |
| 35 | Supplying electric baby bottle warmer of standard capacity with temperature control. |
| 36 | Providing and fixing stainless steel/metal clothes hooks on wall including screws and fittings. |
| 37 | Providing and supplying sturdy foot stool made of plastic/wood with anti-skid base. |
| 38 | Providing and supplying comfortable cushioned nursing chair with armrest of approved design. |
| 39 | Providing and fixing wall-mounted mirror with frame, including necessary fittings. |
| 40 | Providing, supplying, installation, testing and commissioning of 1 Ton capacity split air conditioner including indoor/outdoor units, piping, wiring and accessories. |
| 41 | Providing and fixing electric emergency bell system with switch and alarm unit, complete. |
| 42 | Providing and supplying plastic/steel dustbin with lid of standard capacity. |
| 43 | Providing and fixing storage racks made of steel/wood for clock room and publication counter, complete. |
| 44 | Providing and fixing janitor storage rack for cleaning equipment, made of durable material. |
| 45 | Providing and supplying cushioned VIP chairs of approved design and quality. |
| 46 | Providing and supplying visitor chairs with/without cushion of standard design. |
| 47 | Providing and supplying wooden teapoi (center table) for VIP lounge, polished and finished. |
| 48 | Providing and supplying first aid box complete with basic medical supplies as per standard requirements. |
| 49 | Provision for supply and fixing of Wooden Door with single Shutter of size (1.05x2.10=2.21sqm) moulded in different designs, consisting of all round frame made out of second class teak wood of size 150 x 150mm, Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. |
| 50 | Supply and fixing of UPVC Window Specification : Supplying and fixing UPVC Size (1.37 x 1.20=1.64Sqm) (Unplasticized Polyvinyl Chloride) Fixed window without mullion / transom of casement type (Open) from the profile the size of Outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, using R2 series with frame (39 mm & above) x (39 mm & above). (Height upto 1.2 metre).MS safety grill should be provided. The corners and joints should be welded and cleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lokable action security protetive hinges strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frame.Thewindowshouldbe got approved from the Executive Engineer before use on work |
| 51 | Providing and constructing a parking shed of size 6.0 m × 6.0 m for Battery Operated Vehicle (BOV), including PCC base, brick masonry, plastering, structural steel framework using G.I./M.S. pipes and angle sections, and roofing with G.I. sheets with side cladding. The item includes fabrication, cutting, bending, welding, erection, and fixing with bolts, nuts, and other fasteners, along with all incidental works.The work also includes complete electrical installation with copper wiring, switches, sockets, MCB, LED lights, conduits, and accessories, as well as painting of steel members, scaffolding, curing, and finishing. Materials required for the work include cement concrete for base (approx. 5.5 Cum), brick masonry (approx. 1.8 Cum), plastering area (approx. 24 Sqm), G.I. square pipes (approx. 30 Nos), G.I. pipes (approx. 6 Nos), G.I. metal sheets for roofing (approx. 22 Nos) and side cladding (approx. 10 Nos), angle sections, bolts, nuts, washers (approx. 3 Kg), anchor/L-bolts (approx. 2 Kg), 12 mm (½\\") bolts (approx. 24 Nos), tower bolts (approx. 6 Nos), aldrops (approx. 2 Nos), pins (approx. 6 Nos), screws, welding electrodes, and cutting consumables. The item also includes electrical materials such as copper wiring (approx. 125 Rmt), MCB (2 Nos), 5-pin sockets (2 Nos), conduit pipes (approx. 10 Nos), clamps (approx. 20 Nos), bends (approx. 10 Nos), junction boxes (2 Nos), switch box (1 No), hose pipe (approx. 50 Rmt), angle holders (2 Nos), LED tube lights (2 Nos), insulation tape (3 Nos), and painting materials for steel components, along with all incidental materials required for complete execution of the work. Including cost and conveyance of all materials, labour charges, hire charges of tools and plants, and all applicable taxes including GST, etc., complete in all respects as per the instructions of the Site-in-Charge and directions of the departmental officials. Please Enable Macros to View BoQ information |
