|
| 1 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2 Mtr. Depth including dressing of bottom and sides of trenches stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm layer with compaction including disposal of all surplus soil as directed with in lead of 30 Mtr.,[CSR item No 6.6 ] including Compaction of Earth with Plate Vibrator |
| 2 | Carriage of Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone Boulders, Kankar and Building Rubbish, Earth. 0.5 to 1.0 km Including loading and unloding. [CSR item No.-5.2(i) & 4.1 (A)] |
| 3 | Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type (CSR10.6 (b) (ii) ) |
| 4 | Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type ( CSR10.13 (a) (ii) ) |
| 5 | 40 mm thick cement plaster D.P.C. 1:3 with admixture of water proofingcompound @ 1 Kg/ Bag of cement (CSR15.51) |
| 6 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth (CSR item No. 11.7) |
| 7 | First class burnt brick work laid in cement sand mortar 1:4 in first storey up to 4 metres above plinth level. [CSR item No. 11.8] |
| 8 | Cement pointing 1:3 deep variety ( CSR 15.60) |
| 9 | 12.5 mm thick cement plaster 1:5 [CSR item No. 15.10] |
| 10 | Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including,attached pilasters buttresses etc. [CSR item No. 9.2] |
| 11 | 1.2 Meter high G.I. barbed wire fancing with 1.2 meter angle iron post 40X40X6mm placed every 3 meter center 0.3 meter below wall level every 15th post end post, corner post suitably strutted provided with 5 horizontal lines and two diagonals interwoven with wires fixed with GL staples , turn buckles etc. Including foundation concrete 1:2:4 of size 0.23X0.23X0.30m for each post complete as per technical clause 807 of MORTH specification (AOR Attached ) |
| 12 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm Unit(CSR item No.16.59) |
| 13 | Iron grated doors, including pintle hinges & arrangements ( CSR 18.5) |
| 14 | Applying priming coat with metal primer on new steel or iron work including preparation of surface ( CSR 16.20) |
| 15 | Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work ( CSR 16.21 ) A&C-I |
| 16 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish ( CSR item No 16.65 )) |
| 17 | Black Granite stone tiles15mm to20mmthickin skirting, risers of steps,dado wall sand pillars laid in12.5mm thick cement ortar 1:3(1cement 3 coarse sand) and jointed with neat cement slurrymixedwithpigment tomatchtheshadeof stone, including rubbing and polishing including labour for fixing dowel pins and cramps. 9 CSR item no 14.870 |
| 18 | Fibre Board Expansion Joints Providing and fixing 25mm thick compressible fibreboard inexpansion joints complete asper drawingsand technical clause2605ofMORT&H specifications (24.61a) |
| 19 | Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical clause 201 of MORT&H specifications In area of Light Jungle (By Mechanical Means) (24.2 C) |
| 20 | Pruning, trimming, shaping of mature trees /shrubs (ht15feet and above) including removal of cut materials up to 50m lead.CSR 32.16) Please Enable Macros to View BoQ information |
