|
| 1 | Supplying Bolted Connections (BS type) HRC fuse link capable to withstand 80KA, 415 V confirms to I.S. 13703 for following current capacity. Make FTC/L&T/Havells(i) HRC Fuse Link -2 Amp |
| 2 | (ii) HRC Fuse Link -4 Amp |
| 3 | (iii) HRC Fuse Link -6 Amp |
| 4 | (iv) HRC Fuse Link -10 Amp |
| 5 | (v) HRC Fuse Link -20 Amp |
| 6 | Supplying Bolted Connections (BS type) HRC fuse Base Suitable for 2 Amp. to 20 Amp. 80 kA, 415 V HRC Bolted fuse link. As per IS/IEC 60269 Part-II |
| 7 | Supplying of LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513, Volt 160V to 270V, (A) Tube Light with integral driver 20 Watts, 4 feet Make: Philips / Bajaj / Crompton |
| 8 | Supplying of approved make single phase industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following [A] 305 mm dia 900 RPM Make: Bajaj/Hevells/ Crompton /Almonard |
| 9 | Supplying of Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV. 50 c/s.1200 mm. sweepMake: Bajaj/Hevells/Crompton /Usha/Orient |
| 10 | Supplying of approved make pedestal fan A.C. 230V. 50 Cy/s. 400 mm sweep oscillating, type and adjustable, height complete with guard regulator, & standard lead flexible wires and plug top. Make: Bajaj/Hevells/ Crompton /Usha/Orient |
| 11 | Supply of TNC Switch with lock for 66/11 KV Panel |
| 12 | Supply of Petroleum Jelly for Sub-station equipments protection (1 Kg Pack) |
| 13 | Indicating lamp LED Type, Mount hole-22 mm, 110 V DC with back panel lock Nut fitting.Red- 100 NosYellow-100 NosGreen-100 NosBlue-100 NosWhite-100 Nos |
| 14 | Providing crimping type Cable Terminals (Lugs) conforming to IS of following types and sizes. (Aluminium Tubular Terminals Long Barrel)) .240 Sq. MM |
| 15 | Providing crimping type Cable Terminals (Lugs) conforming to IS of following types and sizes. (Aluminium Tubular Terminals Long Barrel)) .300 Sq. MM |
| 16 | Supply of Telescopic Earth / Discharge rod up to and included 66 KV, 72.5 KV Tested Manufacture in fully Automatic pultrusion plant having strong electrical & Mechanical strength. As per specification.A. Total section – 4 SectionB. Assembled height – 18 feetMake :- Biemco or equivalent |
| 17 | Supply of Shroud for 11 KV Panel, 12 KV , Jyoti make (As per approved sample) |
| 18 | Supply of Jaw Contact female, 11 KV, 1600 Amp. Jyoti make( As per approved sample) |
| 19 | Supply of Tripping Coil, 110 V DC for 11 KV Panel (suitable for ABB & JYOTI make Panel) |
| 20 | Supply of Closing Coil, 110 V DC for 11 KV Panel (Suitable for ABB & JYOTI make Panel) |
| 21 | Supply of Natural Rubber Latex Seamless Hand Gloves for Electrical purpose tested as per IS 4770-1991 having test potential of 33000 Volts and Maximum working potential 11000 Volts of size 380 mm ‘ Crystal’ Brand. |
| 22 | Supply of Rechargeable Torch with LED Bulb Make: Eveready/Hevells/ Wipro Please Enable Macros to View BoQ information |
