|
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/ manual means in foundation pipeline trenches drain(not exceeding 1.5 m in width or 10 sq.m on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavted soil as directed within a lead of 50m. dressed in: |
| 2 | Rubble packing with hard laterite stone under floors including watering, ramming and consolidating etc. in pipeline trenches and other foundation complete. |
| 3 | Providing and laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 4 | Providing and laying in position (1:2:4) reiforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. (1 cement: 2 coarse sand: 4graded stone aggrt. 20 mm. nominal size) All works upto plinth level. |
| 5 | Centering & shuttering including Strutting, Propping & removal of forms for : Foundation, Footings, Bases for columns and mass concrete |
| 6 | Providing and fixing colour coated galvulium roofing sheets of 0.5 mm thickness incluidng all the accessories but excluding the cost of purlins, rafter, trusses, etc complete as per the directions of the Engineer in charge. |
| 7 | Add for providing & fixing flashing- (Corners, Ridges, Valleys, gable end & trims) (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 8 | Laterite masonary in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 9 | Steel work welded ( SAIL, TATA, VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) in built up sections trusses and frames work including cutting, hoisting, fixing in position and applyin priming coat of red lead paint. b) In tees, angles, flats and channels |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes, etc.) (Square Hollow Section (SHS) IS4923/Rectangular Hollow Section (RHS) IS4923/Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 11 | Painting one or more coats with superior quality ready mixed pint of steel work of approved brand & manufacture in all shades on old work to give as even shade |
| 12 | 12mm Cement plaster 1:4 (1 cement : 4 fine sand) |
| 13 | Providing and laying in design & pattern factory chamfered edge Cement Concrete Paver blocks (C.C. pavers blocks) of M35/M40 strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of fine sand compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufactuer's specification & direction of engineer b) 60mm thick with Red/Black colour(M35 grade) |
| 14 | Providing aand fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete b) Cherry red |
| 15 | Rounding of edge of marble slab to Semi Circular slope |
| 16 | Providing and fixing vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colurs & shade in skirting, riser of step and dados jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete. |
| 17 | Providing High Yield Strength steel (HYSD) (Confirming to IS 1786 of 1986)for RCC work including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 18 | Providing and fixing prefabricated compound gate of G.I. pipes 40-50 mm dia (medium) with 12 mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arragements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 granitic or basaltic aggregate 20mm nominal size) including applying priming coat 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 19 | Providing woodwork in frame of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position a) First class Indian teak wood |
| 20 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including black enameled iron butt hinges with necessary screws: b) Nano or equivalent. |
| 21 | Painting one or more coats with acrylic exterior paint of approved brand and manufacture (such as Dulex/Asian Paints/Sherwin Willians) on old work including cleaning the surface with water etc. complete. |
| 22 | Round up by adding Please Enable Macros to View BoQ information |
