Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | GST % for the tender Please select the rate of GST in cell AY13. Rate selected shall be applicable for the entire BoQ. |
| 2 | ELECTRICAL ARC WORKS |
| 3 | Removal of sand from cable trench without any damage to the cable and disposing it within a lead of 50 meteres or putting it back into the same trench or in a new cable trench as per drawing within a lead of 50 meteres all complete with labour and materials as per the direction of the Engineer-in- Charge. |
| 4 | Dismantling/pulling out the LT/HT, PVC/XLPE, power / control / telephone / computer, armoured/ unarmoured cables of various voltage grades/types/ sizes / makes from the trench (upto 1.5 metres deep) / pipes / structures / racks or trays, rolling it into empty cable drums, returning the filled up cable drums to the store/another site including transportation of empty cable drums from stores to site and filled up cable drums from site to stores/another site, etc. including cutting of cables at joints/ termination, dismantling of clamps etc. all complete with labour and materials as per directions of the Engineer-in- Charge. Overall diameter upto 35 MM |
| 5 | Dismantling/pulling out the LT/HT, PVC/XLPE, power / control / telephone / computer, armoured/ unarmoured cables of various voltage grades/types/ sizes / makes from the trench (upto 1.5 metres deep) / pipes / structures / racks or trays, rolling it into empty cable drums, returning the filled up cable drums to the store/another site including transportation of empty cable drums from stores to site and filled up cable drums from site to stores/another site, etc. including cutting of cables at joints/ termination, dismantling of clamps etc. all complete with labour and materials as per directions of the Engineer-in- Charge Overall diameter > 35 MM but upto 55 MM |
| 6 | Dismantling of Electrical wiring (comprising of single or twin core PVC wires upto 6 Sq mm and single earth wire upto 6 SWG) along with its connected accessories like junction boxes, surface conduits, battons, switch boards etc. |
| 7 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark)230 V AC 1 module buzzer |
| 8 | Supply, installation,testing and commissioning of occupancy sensor based on PIR technology-non regulated programmable |
| 9 | Supply, installation,testing and commissioning of occupancy sensor based on PIR technology-regulating programmable with day light dimming |
| 10 | Supply, installation,testing and commissioning of occupancy sensor based on microwave technology-non regulated programmable |
| 11 | Supply, installation,testing and commissioning of astronomical time switch (Electronic Timer) for single phase supply with 1 output per phase |
| 12 | Supply, installation,testing and commissioning of astronomical time switch for single phase supply with 2 outputs per phase |
| 13 | Supply, installation,testing and commissioning of astronomical time switch for three phase supply with 1 output per phase (total 3 outputs) |
| 14 | Supplying and fixing 20 amps., 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps. C curve, SP,MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Note:ISI marked sockets shall be used. |
| 15 | Supplying and fixing 30 amps., TPN, industrial type socket outlet, with 4 pole and earth metal enclosed, plug top, alongwith 30 amps., C curve, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Note: ISI marked sockets shall be used. |
| 16 | Supply and fixing of below given white cover plate with frame for mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 3 module |
| 17 | Supply and fixing of below given white cover plate with frame for mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 4 module |
| 18 | Supply and fixing of below given white cover plate with frame for mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 6 module |
| 19 | Supply and fixing of below given white cover plate with frame for mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 12 module (6 x 2) |
| 20 | Supplying following way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge. Sheet steel DP MCB enclosure |
| 21 | Supplying following way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge. Sheet steel TP MCB enclosure |
| 22 | Supplying and fixing of following rating 240 volts, 50Hz, 10KA, 'B' Curve, miniature circuit breacker (suitable for lighting and other domestic loads and conforming to IS 8828:19) of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp/equivalent make shall be used as per direction of Engineer-in-Charge. 5 To 32 Amp |
| 23 | Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. SP |
| 24 | Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. SPN |
| 25 | FLP & WP JUNCTION BOXSupply, erection, installation, testing and commissioning of flameproof & weather proof junction box for providing cable termination of motor, including connection and termination of earthing wire and conduits etc., including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries complete as per drawings, specifications and direction of the Site Engineer, including the cost of all labour, tools, consumable materials etc., complete in all respect.: 6 way junction box with 6 cable entries (6 x 3/4\\") at bottom & 20 nos. terminals. |
| 26 | CAUTION BOARD :Supply and installation of vitreous enamel caution boards suitable for 440 V/11KV/6.6 KV as per IS 255 including fixing on the wall with all the required hardware etc. complete in English / Hindi/ Local Language. |
| 27 | SHOCK TREATMENT CHART :Supply and installation of shock treatment chart framed in good quality glass in English / Hindi / Local Language. |
| 28 | Providing and fixing 63 amps. Metal clad, TP&N switch fuse unit, 415/500 volts, without H.R.C. fuses including drilling holes on the board, connections, earthing the body etc. as required. 1.ISI marked HRC fuses shall be used. 2.TPN of English Electric / L&T / Crompton / Havells / Standard /equivalent make shall be used as per direction of Engineer-in-Charge. |
| 29 | Carryout routine maintenance and servicing of LT. Cubical pannel board having approximately 15 to 22 Nos of switches/feeders, cleaning with power blower and servicing the contacts, tightning the connection of incoming and outgoing cables, and checking the operating machanism for smooth functioning of switches and putting them in smooth working condition. |
| 30 | Attending to below type of complaint(s). The nature of complaint will also be Specified by owner) Complaint Type 1 (should attend with in 1 Hour from the time of complaint from owner Reprasentative/EIC/SE and complete within sum of specified time period for all items executed in this complaint as per item) |
| 31 | Attending to below type of complaint(s). The nature of complaint will also be Specified by owner) Complaint Type 2 (should attend with in 24 Hours from the time of complaint from owner Reprasentative/EIC/SE and complete within sum of specified time period for all items executed in this complaint as per item) |
| 32 | Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used. 1 x 2.5 sq.mm |
| 33 | Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used. 1 x 4 sq.mm |
| 34 | Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used. 1 x 6 sq.mm |
| 35 | Repair & Painting two coats of any shade on steel surfaces, TR unitboxes, Energy Meter Boxes, Junction boxes etc. with synthetic enamelpaint of approved make and brand including smoothening and surfacepreparation by sand paper etc., complete inclusive of material, labour,tools & tackles as directed by Site Engineer/ Engineer-in-Charge |
| 36 | Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. DP |
| 37 | Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. TP |
| 38 | Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. TPN |
| 39 | Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. FP |
| 40 | Supply of MCB / Isolator/ RCCB/ELCB of following rating as per direction of Engineer-in-Charge. 40 amps. to 63 amps. ratings , 3 Pole MCB, “C” curve,10 KA breaking capacity |
| 41 | Supply of MCB / Isolator/ RCCB/ELCB of following rating as per direction of Engineer-in-Charge. 40 amps. to 63 amps. ratings , 4 Pole MCB, “C” curve,10 KA breaking capacity |
| 42 | Supply of power contactor, 3 Pole, AC 3 Duty, 240 VAC, 50 Hz coil of following rating as per direction of Engineer-in-Charge: 25 Amps, L&T MNX25 or equivalent |
| 43 | Supply of power contactor, 3 Pole, AC 3 Duty, 240 VAC, 50 Hz coil of following rating as per direction of Engineer-in-Charge: 32 Amps, L&T MNX32 or equivalent |
| 44 | Supply of power contactor, 3 Pole, AC 3 Duty, 240 VAC, 50 Hz coil of following rating as per direction of Engineer-in-Charge: 45 Amps, L&T MNX45 or equivalent |
| 45 | Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Control contactors- 8 contacts for AC control standard coil voltage - 25, 110, 240, 415, 50Hz Type MX0 of L&T or equivalent. |
| 46 | Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Control contactors- 4 contacts for DC control standard coil voltage - 24, 110, 220 Type MN0 of L&T or equivalent. |
| 47 | Supplying & fixing GI chain link fencing (for CP station/AJBenclosure/MOV) of approx. size 3\\"\\" x 3\\"\\" diamond shape (10 guage) withhorizontal GI wire (8 SWG) at top & bottom for fixing chain link toexisting structures including necessary clamps, cleat, painting, alllabour & material etc complete as directed by Site Engineer/Engineer-in-Charge. |
| 48 | Removing the existing chain link fencing (in CP/ Anode JCB/ MOV stationenclosure) winding in bundles, transporting and stacking in stores asdirected by Site Engineer/ Engineer-in-Charge inclusive of labour, tools& tackles etc. |
| 49 | Supply & filling of black cotton soil around anodes/ rails in anode bedas per instructions of Site Engineer inclusive of cost of black soil ,materials, transportation to site, labour etc |
| 50 | Supplying & putting following back fill materials around high silicon/cast iron anodes/ scrap rails earthing electrodeas per the instructionsof Site Engineer including the back fill materials, transportation to site, labour etc. (For items below) Coke Breeze (4-10mm size) |
| 51 | Supplying & putting following back fill materials around high silicon/cast iron anodes/ scrap rails earthing electrodeas per the instructionsof Site Engineer including the back fill materials, transportation to site, labour etc. (For items below) Bentonite Powder |
| 52 | Supplying & putting following back fill materials around high silicon/cast iron anodes/ scrap rails earthing electrodeas per the instructionsof Site Engineer including the back fill materials, transportation to site, labour etc. (For items below) Salt |
| 53 | Supplying & putting following back fill materials around high silicon/cast iron anodes/ scrap rails earthing electrodeas per the instructionsof Site Engineer including the back fill materials, transportation to site, labour etc. (For items below) Charcoal |
| 54 | Supplying & putting following back fill materials around high silicon/cast iron anodes/ scrap rails earthing electrodeas per the instructionsof Site Engineer including the back fill materials, transportation to site, labour etc. (For items below) Gypsum |
| 55 | Checking of ground bed of anode without excavation as per direction ofthe Site Engineer including cost of all labour, ground bed tools andtackles etc. Rate is on basis of per Bed\\" |
| 56 | Supply & Installation of Anode junction boxes (AJB) at location or asper direction of site engineer including supply of vandal proof AJB Box( 2mm MS thick plate) with proper size of lug, washer & brass nut bolt,Bakalite insulation plate, interconnection/ termination of cables, 2\\"\\"dia GI pipe(B class) of 2 mtr length threaded at one end to fit thevandal proof AJB Box & other end with T connection with a piece of GIpipe for cable entries with a base plate welded at bottom, applying thealuminium paint (two coats) over one coat and zinc chromate primer ontheAJB and GI pipe, complete in every respect as per drawing ,specifications and instructions of site engineer inclusive of the costof Laying & terminating the respective length of anode cable on Bakeliteinsulating plate with copper lugs,brass nuts/bolts, washer lugs insidethe Anode junction box (AJB) enrouting the cable through inside of theAJB box pipe to the nearest AJB boxes ,copper lugs, nut-bolts, alltools, machinery, all labour, materials etc with the foundation as (for items below)\\" |
| 57 | Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Power Contactor (with 1NO + 1NC)- Upto 25 Amp (AC3) for AC standard coil voltage - 110, 220, 240, 415 V, 50Hz Type MNX25 of L&T or equivalent |
| 58 | Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Power Contactor (Upto 2NO + 2 NC)- Above 45 Amp but upto 140 Amp (AC3) for AC standard coil voltage - 110, 220, 240, 415 V, 50Hz Type MNX140 of L&T or equivalent |
| 59 | Providing and fixing of metal clad, rewireable type switch fuse unit confirming to IS: 13497 (Part-I & II) of following ratings (Amp / Volt) including drilling holes on the board, connections, earthing the body etc. as required. Note: SFU of English Electric / L&T / Crompton / Havells /Standard /equivalent make shall be used as per direction of Engineer-in-Charge. 32A / 415V, Tripple pole & neutral |
| 60 | Providing and fixing of metal clad, rewireable type switch fuse unit confirming to IS: 13497 (Part-I & II) of following ratings (Amp / Volt) including drilling holes on the board, connections, earthing the body etc. as required. Note: SFU of English Electric / L&T / Crompton / Havells /Standard /equivalent make shall be used as per direction of Engineer-in-Charge. 63A / 415V, Tripple pole & neutral |
| 61 | Providing and fixing of metal clad, rewireable type switch fuse unit confirming to IS: 13497 (Part-I & II) of following ratings (Amp / Volt) including drilling holes on the board, connections, earthing the body etc. as required. Note: SFU of English Electric / L&T / Crompton / Havells /Standard /equivalent make shall be used as per direction of Engineer-in-Charge. 100A / 415V, Tripple pole & neutral |
| 62 | Supplying and fixing following rating, single pole & double pole isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 40 A SP |
| 63 | Supplying and fixing following rating, single pole & double pole isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 63 A SP |
| 64 | Supplying and fixing following rating, single pole & double pole isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 40 A DP |
| 65 | Supplying and fixing following rating, single pole & double pole isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 63 A DP |
| 66 | Supplying and fixing following rating, three pole and four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 40 A TP |
| 67 | Supplying and fixing following rating, three pole and four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 63 A TP |
| 68 | Supplying and fixing following rating, three pole and four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 125 A TP |
| 69 | Supplying and fixing following rating, three pole and four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 40 A FP |
| 70 | Supplying and fixing following rating, three pole and four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 63 A FP |
| 71 | Supplying and fixing following rating, three pole and four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used 125 A FP |
| 72 | Supplying and fixing following rating, double pole, (single phase neutral), 240 volts, residual current circuit breaker (RCCB/ELCB), ISI marked, having a sensitivity current indicated miliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked RCCB/ELCB shall be used. 25 amps., 30 mA |
| 73 | Supplying and fixing following rating, double pole, (single phase neutral), 240 volts, residual current circuit breaker (RCCB/ELCB), ISI marked, having a sensitivity current indicated miliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked RCCB/ELCB shall be used. 32 amps, 100 mA |
| 74 | Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB/ELCB), ISI marked, having a sensitivity current upto indicated milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked RCCB/ELCB shall be used. 40 amps., 30 mA |
| 75 | Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB/ELCB), ISI marked, having a sensitivity current upto indicated milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked RCCB/ELCB shall be used. 40 amps, 100 mA |
| 76 | Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB/ELCB), ISI marked, having a sensitivity current upto indicated milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked RCCB/ELCB shall be used. 63 amps., 30 mA |
| 77 | Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB/ELCB), ISI marked, having a sensitivity current upto indicated milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked RCCB/ELCB shall be used. 63 amps, 100 mA |
| 78 | Supplying following way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge. 6 way, SPN, double door, MCB DB, IP-43 |
| 79 | Supplying following way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge. 8 way, SPN, double door, MCB DB, IP-43 |
| 80 | Grouting the AJB pipe over concrete foundation (TLP grouting) withcement concrete mixture 1:2:4 (1 Cement: 2 Sand: 4 Grit of 20mm nominalsize) |
| 81 | Buring the AJB pipe in ground with minimum depth of 0.5 mtr.theground level or as per Site Engi |
| 82 | Repair of AJBs at various locations of Pipeline,by extension of Anode lead wire by straight through joint or laying new 16 sqmm multi strandor 7/16 uage PVC fexible copper cable of required length which to beto be properly terminated on Bakelite insulating plate with copper lugs,brass nuts/bolts, washer lugs inside the Anode junction box (AJB)enrouting the cable through inside of the AJB box pipe, Supply of frontcover plate, copper/brass nut bolts,bakelite sheet, connection of cables,allen screw for vandal proof AJB Box, including excavation andbackfilling materials,if required the uprooting of TLPs & removal ofdamaged wire, materials, labour, tools etc.and as per the direction ofsite engineer . Exculding the cost of 16sqmm multi strand or 7/16gauage PVC insulated flexible copper cable |
| 83 | Repair of earthing connections by locating the earthing wire in side thePCC flooring including dismantling of required area of PCC flooring ,extending the existing wire using suitable length of 10 sqmm brasscopper conductor , lugs and brass nut/bolts etc. restoration of the PCCof flooring after the job , checking of earthing , resistance jobcomplete in all respects as per instructions and specificationsincluding labour, materials and tools etc. (Cost of 10 sq.mm brasscopper conductor not to be included in this rate). Unit IIEAIsIhall me anv Per CP\\" |
| 84 | Repair of earthing connections wherever the earthing wire/ GI strips snapped inside the earth y locations of snapped eathing/ GI strips (if required at different places) inside the earth by excavating , extension of the existing earthing wire suitable length of 10 sqmm/ same dimension GIstrips,Interconnections of wires/ GI strips, providing Bars copperconductor, lugs, brass nuts/ bolts etc. checking of earthing resistanceafter restoration of the earthing connection, job complete in allrespects as per instructions and specifications including labour ,materials, tools etc. Only excavation & backfilling cost not included inthis job else every material cost is included. |
| 85 | Providing Silicon/ Magnesium anode pig tail connection with single corel0 - 35 sq-mm PVC insulated copper conductor cable from the existinganode bolts including supply of cables, brass nuts/ bolts/ washer/M-seal, cold pouring compound tools labour complete in all respect asper the instruction of site engineer/ EIC. |
| 86 | Removal of scrap rails from the excavated ground bed at a lead of 50meter, cleaning the same completely by removing rusted chips, scales ,dust, mud etc. to give good conducting surface and positioning the samein the excavated trench including supply of materials like sand paper,brushes, cloths, labour, tools etc. as per the instructions of the siteengineer/ EIC. |
| 87 | Uprooting of old TLP Box length and backfilling pipe top with soft earth. Retrieved pipeand other materials to be deposited back to owners store at Sendraincluding transporation of material to owner store, all tools, tackles,labours required for job etc. |
| 88 | Shifting of the a TLP box from one location to another location completein all respect including cost of transportation of TLP to otherlocation, lobours, material etc & as per direction of site engineer(For items below)\\" Uprooting of TLP as per specifications & new Cathode connection as per specifications and instruction of Site Engineer/ Engineer-in-Charge |
| 89 | Shifting of the a TLP box from one location to another location completein all respect including cost of transportation of TLP to otherlocation, lobours, material etc & as per direction of site engineer(For items below)\\" Uprooting of TLP as per specifications and shifthing of cathode connection by extension ofexisting wire through proper straight through joint with same size cableor laying of new 6 sqrnmcable from existing pipe connection upto TLptermination. Excluding the cost of 6 sq.mm cable. The straight throughjoint or new cable laying will be as per site condition & at thediscreation of Site Engineer/ Engineer-in-Charge |
| 90 | Supplying following way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge. 12 way, SPN, double door, MCB DB, IP-43 |
| 91 | Supplying following way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge. 14 way, SPN, double door, MCB DB, IP-43 |
| 92 | Supplying following way,horizontal type,TPN, sheet steel, MCB distribution board, 415 V, with acrylic door cover, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge(8 +12) 4 Way TPN DB Horizontal with IP 42 |
| 93 | Supplying following way,horizontal type,TPN, sheet steel, MCB distribution board, 415 V, with acrylic door cover, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge(8 +18) 6 Way TPN DB Horizontal with IP 42 |
| 94 | CAD welding of the cable with piepline: The job is inclusive of thefollowing: (a) Preparation of the Cable and Pipeline for Cad Welding (b)Proper Cad elding of the Cable with the Pipeline Trench (c) EncapsulatJ..onof the Cad Welded Pipeline portion (d) Checking holidqay on the pipeline. The job is also inclusive of all necessary labour ,sundry materials and accessories required to carry out the job in aproper manner and shall be carried out to the complete satisfaction ofthe Engineer-in-Charge/ Site Engineer |
| 95 | Rewinding of CP transformer/ choke 4.0 KVA / 5.0 KVA#inclusive of alllabour, transportation, materials, tools & tackles etc\\" |
| 96 | Rewinding of CP transformer/ choke 1.5 KVA inclusive of all labour ,transportation, materials, tools & tackles etc. |
| 97 | Testing of anode bed feasibility at a location decided by the site engineer/ EIC. The job includes (1) Excavation of 1.0m x1.0m x 1.5m pits (max. 10 nos.) & backfilling the same after laying ofAnodesi (2) Connecting anodes (M.S. rods) with cables (T-joints),interconnection of Anodes through cables including making straightthrough joints as required & laying of cables till CP unit/ AJBprovided. (3) Supply & filling requisite quantity of backfill aterialsaround anodes (salt, CPC & bentonite) as directed by theEngineer-in-Charge. The salt & bentonite powder shall be supplied by theContractor (Salt = 100 Kg max. & Bentonite Powder = 25 Kg max.) (4)Supply & watering around anode pits (5 KL max.) formed. (5) Aftercompletion of this job, energizing the temporary anode bed & any defectfound then it to be rectified by the Contractor it self on its own cost& expenses. (6) All petty items required like, washers, nut bolts ,connectors as required for anode cable interconnection shall be suppliedby the Contractor. (7) The Owner supplied materials shall be taken bythe Contractor to the site decided at its own cost & expenses. Aftertesting is complete, the Owner supplied material shall be returned tothe Owner's store by the Contractor at its own cost & expenses. (8)Additionally labour cost, transportation of materials, cosumables etc.shall be included in the rates & shall be borne by the Contractor. Thejob shall be completed as per the direction of Engineer-in-Charge/ SiteEngineer. (Unit \\"\\"EA\\"\\" shall mean \\"\\"Per Anode\\"\\" |
| 98 | \\"Retrival of MMO/ Mg/ Zinc Anodes from Abdoned/ working Anode Beds ornear pipline suface after excavating the earth at a depth of 5 to 10 ft from the earth surface having sufficient TLP/AJB boxes systematically, backfilling the excavated earthas its original profile & returning the excavated Anodes back to ownersstores. The job includes supply of all materials, labours,tools-tackles, transportation cost & to be completed as per theinstructions of Site Engineer/ EIC.disconnecting the Anodesfrom their \\" |
| 99 | Repair of the existing Test Lead Points in our Right-of-Way including supplying of all the required materials and making good the defects so as to complete the TLPs in working condition in accordance with the drawing for the following missing items/faults and as per the instructions of the Site Engineer /Engineer-in-Charge.(a)Providing & welding missing TLP Covers with locking arrangements and allen keys. |
| 100 | Repair of the existing Test Lead Points in our Right-of-Way including supplying of all the required materials and making good the defects so as to complete the TLPs in working condition in accordance with the drawing for the following missing items/faults and as per the instructions of the Site Engineer /Engineer-in-Charge.(b)Providing & welding missing TLP Box with Covers having locking arrangements with allen keys,5mm thick bakelite sheets,10mm dia. brass bolts,Excavating the TLP upto the bottom of outlet of 2.5Sqmm PVC insulated cables,removal of the faulty cables,Providing & jointing new cables,connecting to the 5mm thichk bakelite sheet and commissioning the TLPs in working condition omplete as per the instructions of the Site Engineer/Engineer-in-Charge. |
| 101 | Supply and pouring of water around anodes/scrap rails in anode bed, sacrificial anodes and earthing as directed by site engineer |
| 102 | Preparation of surface by removing dust, grease, rust, scales etc. & priming with one coat of red oxide primer & painting the surface with 2 coats of aluminium/smoke grey ( as applicable ) paint as per specifications including cost of all materials, paints, primer, complete in all respects as per instruction of site engineer. In respect of CP fencing, structures, doors, lifting arrangement, energy meter box etc. with alluminium paint. Rate for \\"PER CP\\" |
| 103 | Preparation of surface by removing dust, grease, rust, scales etc. & priming with one coat of red oxide primer & painting the surface with 2 coats of aluminium/smoke grey ( as applicable ) paint as per specifications including cost of all materials, paints, primer, complete in all respects as per instruction of site engineer.In respect of cp unit painting with smoke gray paint. Rate for \\"PER CP\\" |
| 104 | *LT STRAIGHT THROUGH CABLE JOINT FOR ARMOURED PVC INSULATED CABLE(INCLUDING COST OF JOINT KIT OF CAST RESIN TYPE):Making straight through joints for medium voltage PVC armoured power & control cables (upto 1.1KV grade) including cutting, stripping of cable insulation, including supply of casters in straight through cable jointing kit of Mahindra /CCI / approved equivalent make with ferrules. All complete with labour and materials as per drawings, specifications and directions of Engineer-in-charge: 1 x upto 70 sqmm. |
| 105 | Inspection and Maintenance including supplying and installation of CP items of Canara Make CPTRU by OEM or OEM authorize party Engineer's Charges for remotely operated TR inspection & functional check and complete CP system function check inclusive of lodging and boarding |
| 106 | Supplying following way,horizontal type,TPN, sheet steel, MCB distribution board, 415 V, with acrylic door cover, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge(8 +24) 8 Way TPN DB Horizontal with IP 42 |
| 107 | Supply and fixing of below given metal flush boxes to accommodate mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 1 / 2 module |
| 108 | Supply and fixing of below given metal flush boxes to accommodate mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 4 module |
| 109 | Supply and fixing of below given metal flush boxes to accommodate mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 6 module |
| 110 | Supply and fixing of below given metal flush boxes to accommodate mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge.8 module |
| 111 | Supply and fixing of below given metal flush boxes to accommodate mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 12 module (6 x 2) |
| 112 | Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used. 1 x 1.5 sq.mm |
| 113 | Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used. 2 x 1.5 sq.mm |
| 114 | Supply and fixing of following size of PVC conduit alongwith the accessories in recess including cutting the wall and making good the same in case of recessed, conduit as required: Note: Only ISI marked conduits shall be used. 20 mm |
| 115 | Supply and fixing of following size of PVC conduit alongwith the accessories in recess including cutting the wall and making good the same in case of recessed, conduit as required: Note: Only ISI marked conduits shall be used. 25 mm |
| 116 | Supply and fixing of following size of PVC conduit alongwith the accessories in recess including cutting the wall and making good the same in case of recessed, conduit as required: Note: Only ISI marked conduits shall be used. 32 mm |
| 117 | Providing and fixing following size of PVC casing and caping on surface as required. Note: Only ISI marked caping and casing shall be used. 15 mm x 10 mm |
| 118 | Providing and fixing following size of PVC casing and caping on surface as required. Note: Only ISI marked caping and casing shall be used. 25 mm x 10 mm |
| 119 | Providing and fixing following size of PVC casing and caping on surface as required. Note: Only ISI marked caping and casing shall be used. 50 mm x 20 mm |
| 120 | Supply and fixing of metal box of following size (nominal) in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required. 75 mm x 75 mm x 60 mm deep |
| 121 | Supply and fixing of metal box of following size (nominal) in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required. 200 mm x 150 mm x 60 mm deep |
| 122 | Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). FLP/INCREASED SAFETY WELLGLASS/ BULKHEAD/ TUBELIGHT/ FLOOD LIGHT |
| 123 | Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). FLP/INCREASED SAFETY CONTROL GEAR BOX/ JUNCTION BOX/SWITCH/SOCKET |
| 124 | Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). RECESSED TUBELIGHT FITTING/ FALSE CEILING FITTING |
| 125 | Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). STREET LIGHT FITTING (UPTO 9 M HEIGHT) |
| 126 | Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). FLOODLIGHT WITHOUT CONTROL GEAR |
| 127 | Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). FLOODLIGHT WITHOUT CONTROL GEAR (MORE THAN 9 M HEIGHT INCLUDING ON FLDM) |
| 128 | Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). CONTROL BOX FOR FLOODLIGHT |
| 129 | Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). CONTROL BOX FOR FLOODLIGHT (MORE THAN 9 M HEIGHT INCLUDING ON FLDM) |
| 130 | Charges towards conveyance and No. of days spent in journey (Travel Expenditure To & Fro (Mumbai to WB IOCL Site)) |
| 131 | Verification of various defect spots each at different locations by bell hole inspection as per the given specificaitons, Procedure and directions of Site Engineer / Engineer-in-Charge. |
| 132 | Repair of defect spot exposed through bell hole inspection using Owner supplied Cold Applied Tape as per given specificaitons, Procedure and directions of Site Engineer / Engineer-in-Charge. |
| 133 | Supply & installation of AC corrosion coupon of 1sqcm area of SS316L material for measurement of Current Density in Pipeline with approx. 10M length 6sqmm armoured XLPE Cu Cable. Sealing of the soldered joint should be epoxy resin. This work also includes installation of the coupon at the pipe line depth and within a distance of 0.5 M from the pipeline inclusive of cable & terminating the cable in the DAC type TLP terminal. The item also includes supply, installation / laying & termination of all XLPE, Cu cables of required length (as per site conditions) and size as mentioned in the standard drawings, toggle switch, cable glands and lugs etc., complete in all respect. The work complete in all respect shall include supply of all labour, tools etc complete as per the directions of the Site Engineer and as per drawing no. 9200-99900-404-601-01/ drawing given in contract document. |
| 134 | Supplying and Fabrication of RCC test lead posts of 8inch. dia. (as per attached sketch and specification) of Reinforced cement concrete M - 20 with nominal mix of 1:1.5:3 with approved quality of stone chips 12mm to 6mm Size graded and clean coarse sand of FM2.5 to FM3. Work is inclusive of supply, punning, lettering and painting with synthetic enamel paint. It includes providing end plug/cap threaded and providing electrical connection with 1c X 10mm2 PVC multi copper wire. The job complete in all respect as per drawing including material labours and direction of Engineer-in-Charge |
| 135 | Transportation and Installation of RCC test lead point (TLP) at various locations along the ROW as directed by site Engineer. The work includes transportation of TLP at site, earth excavation (0.4m*0.3m*0.3m), lowering the TLP, making connection, breaking the coating and recoating if required and cast at site PCC (1:1.5:3) work and backfilling the soil inclusive of punning and painting with synthetic enamel paint. The electrical connection of TLP wires with carrier pipe and casing (as applicable) is to be made by tack welding at 3-4 locations half inch threaded coupling with matching plug using low penetrative electrode (E6013). After welding the coupling, the wires shall be connected to the coupling and plugged with a matching plug. The chainage and pipeline section shall then be painted on the TLP at the space provided using synthetic enamel paint. The job complete in all respect as per drawing including material, labours direction of Engineer-in-Charge |
| 136 | Repair and Testing of installed TLP - The work includes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site (if applicable), including MS hard pipe for cable entry through foundation, re-erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, jointing the cables to pipe (using pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, The chainage and pipeline section shall then be painted on the TLP at the space provided using synthetic enamel paint. The work also includes supply, installation, laying & termination of all XLPE, Cu cables of required length (as per site conditions) and 1c X 10mm2 PVC multi copper wire size, lugs etc |
| 137 | Pin Brazing of the cable with piepline: The job is inclusive of thefollowing: (a) Preparation of the Cable and Pipeline for Pin Brazing (b)Proper Pin Brazing of the Cable with the Pipeline Trench (c) Encapsulationof the Pin Brazed Pipeline portion (d) Checking holiday on the pipeline. The job is also inclusive of all necessary labour ,sundry materials and accessories required to carry out the job in aproper manner and shall be carried out to the complete satisfaction ofthe Engineer-in-Charge/ Site Engineer |
| 138 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 12 x 2.5 sqmm LT control cables with cop |
| 139 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 14 x 2.5 sqmm LT control cables with cop |
| 140 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 16 x 2.5 sqmm LT control cables with cop |
| 141 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 19 x 2.5 sqmm LT control cables with cop |
| 142 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 25 sqmm |
| 143 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 35 sqmm |
| 144 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 50 sqmm |
| 145 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 70 sqmm |
| 146 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 95 sqmm |
| 147 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 120 sqmm |
| 148 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 150 sqmm |
| 149 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 185 sqmm |
| 150 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 225 sqmm |
| 151 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3-1/2 x 240 sqmm |
| 152 | BRICK SOLING: Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable trenches for protectionincluding the cost of all brick and sand, labour, load and lift charges , tools and tackles etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge. |
| 153 | Providing and fixing 100 amps. Metal clad, TP&N switch fuse unit, 415/500 volts, without H.R.C. fuses including drilling holes on the board, connections, earthing the body etc. as required. 1.ISI marked HRC fuses shall be used. 2.TPN of English Electric / L&T / Crompton / Havells / Standard /equivalent make shall be used as per direction of Engineer-in-Charge. |
| 154 | Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL/L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 20-32 AMP Size 000 |
| 155 | Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL/L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 50 AMP Size 000 |
| 156 | Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL/L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 63 AMP Size 000 |
| 157 | Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL/L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 80 - 100 AMP Size 000 |
| 158 | Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL/L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 125 AMP Size 00 |
| 159 | Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL/L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 125 AMP Size 1 |
| 160 | Repair/replacement of kit/kat/HRC fuse bases of different sizes in feeder pillars, main switches, substations, pump houses, residential buildings, public buildings, hospitals, clubs, schools, shopping center and at any other place where special programmes are being organized from time to time for restoring the power supply. Job complete in all respects as per directions of the Engineer-in-Charge. NOTE: Fuse base of capacity from 16 Amp. To 300 Amp. of any voltage grade will be supplied by Owner . |
| 161 | Installation and connection of following distribution board / plung and socket baord / SFU / FSU / MCCB of HAVELLS / GEC/ Astholm/ L&T/ Standard/ MDS or approved equivalent on iron structure/wall including all accessories and other materials complete with labour and materials as per direction of the Engineer- in-charge. (Distribution Board / SFU of any type shall be supplied by the owner ) INDUSTRIAL TYPE PLUG SOCKET |
| 162 | PROVIDING CABLES: Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%: CU,3CX2.5 mm²,2XWY |
| 163 | PROVIDING CABLES: Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%: CU,6CX2.5 mm²,2XWY |
| 164 | PROVIDING CABLES: Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% CU,2CX4 mm²,2XWY |
| 165 | PROVIDING CABLES: Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% CU,4CX4 mm²,2XWY, |
| 166 | PROVIDING CABLES: Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% CU,2CX70 mm²,2XWY |
| 167 | PROVIDING CABLES:Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% CU,3CX6 mm²,2XWY |
| 168 | PROVIDING CABLES:Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% CU,1CX70 mm² |
| 169 | PROVIDING CABLES: Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% CU,2CX10 mm²,2XWY |
| 170 | PROVIDING CABLES: Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% CU,12CX2.5 mm², 2XWY |
| 171 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,3CX10 mm²,A2XFY |
| 172 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,3CX16 mm² |
| 173 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,4CX16 mm²,A2XFY |
| 174 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,3CX25 mm²,A2XFY |
| 175 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,3.5CX25 mm²,A2XFY |
| 176 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,3.5CX35mm²,A2XFY |
| 177 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,3.5CX50 mm²,A2XFY |
| 178 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, Al,3.5Cx70 mm² |
| 179 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL, 3½C x 95 mm² |
| 180 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,3½C x 120 mm² |
| 181 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,3.5CX150 mm²,A2XFY |
| 182 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL, 3½C x 185 mm² |
| 183 | PROVIDING CABLES: Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%, AL,3.5CX240 mm²,A2XFY |
| 184 | Rectification of circuit fault in FLP/Non FLP junction boxes/ DJBs/ DBs/ switchboards etc. other than in FLDMs including supply of minor type of materials costing less than Rs.6.00 in one complaint. All complete with labour and materials as per directions of the Engineer-in-Charge. NOTE : Materials used by contractor should not exceed Rs.6.00 per complaint. Balance material exceeding Rs. 6.00 per complaint shall be supplied by Owner free of cost. Also application of PVC putty/M-Seal putty on above fittings, if required, to avoid entering of water/insects as per directions of the Engineer-in- Charge. Putty will be supplied by Owner free of cost. |
| 185 | Supply, fixing and connection of 250 V flush type / tumbler Anchor make or approved equivalent switch, socket bell push etc. on perpex sheet on MS box inlcuding supply and fixing of nuts, bolts, etc. but excluding the perpex sheet all complete with labour and materials as per direction of the Engineer-in-Charge.: PVC batten/ angle holder |
| 186 | Supply, fixing and connection of 250 V flush type / tumbler Anchor make or approved equivalent switch, socket bell push etc. on perpex sheet on MS box inlcuding supply and fixing of nuts, bolts, etc. but excluding the perpex sheet all complete with labour and materials as per direction of the Engineer-in-Charge.: 3 plate ceiling rose |
| 187 | Supply, fixing and connection of 250 V flush type / tumbler Anchor make or approved equivalent switch, socket bell push etc. on perpex sheet on MS box inlcuding supply and fixing of nuts, bolts, etc. but excluding the perpex sheet all complete with labour and materials as per direction of the Engineer-in-Charge.: 3 pins 5 / 6 amps. ISI marked polycarbonate unbreakable plug top |
| 188 | Installation and connection of following distribution board / plung and socket baord / SFU / FSU / MCCB of HAVELLS / GEC/ Astholm/ L&T/ Standard/ MDS or approved equivalent on iron structure/wall including all accessories and other materials complete with labour and materials as per direction of the Engineer- in-charge. (Distribution Board / SFU of any type shall be supplied by the owner ) MCB DB - SPN |
| 189 | Installation and connection of following distribution board / plung and socket baord / SFU / FSU / MCCB of HAVELLS / GEC/ Astholm/ L&T/ Standard/ MDS or approved equivalent on iron structure/wall including all accessories and other materials complete with labour and materials as per direction of the Engineer- in-charge. (Distribution Board / SFU of any type shall be supplied by the owner ) MCB DB - TPN |
| 190 | Installation and connection of following distribution board / plung and socket baord / SFU / FSU / MCCB of HAVELLS / GEC/ Astholm/ L&T/ Standard/ MDS or approved equivalent on iron structure/wall including all accessories and other materials complete with labour and materials as per direction of the Engineer- in-charge. (Distribution Board / SFU of any type shall be supplied by the owner ) MCB BOARD |
| 191 | Installation and connection of following distribution board / plung and socket baord / SFU / FSU / MCCB of HAVELLS / GEC/ Astholm/ L&T/ Standard/ MDS or approved equivalent on iron structure/wall including all accessories and other materials complete with labour and materials as per direction of the Engineer- in-charge. (Distribution Board / SFU of any type shall be supplied by the owner ) MCCB |
| 192 | Supply of following rating and breaking capacity 4 pole MCCB with thermomagnetic release along with terminal spreaders as per direction of Engineer-in-Charge. 100 Amps, 30kA |
| 193 | Supply of following rating and breaking capacity 4 pole MCCB with thermomagnetic release along with terminal spreaders as per direction of Engineer-in-Charge. 100 Amps, 30kA 125 Amps, 36kA |
| 194 | Supply of following rating and breaking capacity 4 pole MCCB with thermomagnetic release along with terminal spreaders as per direction of Engineer-in-Charge. 100 Amps, 30kA 200 Amps, 36 kA |
| 195 | Installation, connection, testing and commissioning of miscellaneous surface/channel/wall/steel structures mounted Non-FLP type control gear such as push button stations/motor control stations, junction boxes, welding sockets, lighting panels convenience outlets/convenience outlets with built in transformer all complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge. Note: All the fittings, control gears, junction boxes etc. will be supplied by owner . WEIGHT OF THE UNIT UPTO 20 KG. |
| 196 | Installation, connection, testing and commissioning of miscellaneous surface/channel/wall/steel structures mounted Non-FLP type control gear such as push button stations/motor control stations, junction boxes, welding sockets, lighting panels convenience outlets/convenience outlets with built in transformer all complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge. Note: All the fittings, control gears, junction boxes etc. will be supplied by owner . WEIGHT OF THE UNIT ABOVE 20 KG BUT UPTO & INCLUDING 50 KG. |
| 197 | Installation, connection, testing and commissioning of miscellaneous surface/channel/wall/steel structures mounted FLP/Div-1 and Div-2 type control gear such as push button stations/motor control stations, junction boxes, welding sockets, lighting panels convenience outlets/convenience outlets with built in transformer all complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge. Note: All the FLP fittings, control gears, junction boxes etc. will be supplied by owner . WEIGHT OF THE UNIT UPTO 20 KG. |
| 198 | Installation, connection, testing and commissioning of miscellaneous surface/channel/wall/steel structures mounted FLP/Div-1 and Div-2 type control gear such as push button stations/motor control stations, junction boxes, welding sockets, lighting panels convenience outlets/convenience outlets with built in transformer all complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge. Note: All the FLP fittings, control gears, junction boxes etc. will be supplied by owner . WEIGHT OF THE UNIT ABOVE 20 KG BUT UPTO & INCLUDING 50 KG |
| 199 | Supply and fixing of led indication lamp in the panels. leds shall be provided with leakage voltage protection upto 40v. Operating voltage shall be 110V / 220V / 230V /AC /DC, Panel cutouts shall be 22.5 / 25.5 / 30.5 mm. Terminals shall be shrouded for finger proofing and safety are with captivated washers to hold two lugged (fork / pin) wires in one terminal. Job includes supply of labor and various undry materials required and finally testing of led's for + following led's Red / yellow / amber / green / milky white led's |
| 200 | Supply and fixing of led indication lamp in the panels. leds shall be provided with leakage voltage protection upto 40v. Operating voltage shall be 110V / 220V / 230V /AC /DC, Panel cutouts shall be 22.5 / 25.5 / 30.5 mm. Terminals shall be shrouded for finger proofing and safety are with captivated washers to hold two lugged (fork / pin) wires in one terminal. Job includes supply of labor and various undry materials required and finally testing of led's for + following led's Blue led |
| 201 | PAINTING OF ELECTRICAL EQUIPMENTS: Cleaning of surface, rust removing of foreign matter, rubbing down thoroughly with emery paper, wire brush, washing with degreasing solvent (white spirit) to remove grease etc. and preparation of surface for application of paint by spray painting on electrical equipment/ structures/ poles or any other metallic surface with two coats of approved brand and manufacturer Aluminium paint including supply of paint suitable for a temperature of 100 Degree Celsius. All complete with labour and materials as per directions of the EIC. |
| 202 | Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concrete grouting, backfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge. |
| 203 | EARTH ELECTRODES: Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings,specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. complete in all respects. |
| 204 | Providing earthing with copper plate as per IS: 3043 standard / drawing / specification with plate size 600 mm x 600 mm x 3 mm plate materials tinned copper plated with drilled hole at centre to receive 50 mm long 13 mm bolt, nut and double washer screwing system with copper tape/copper flexible. The tape/flexible shall be inside 1 1/2\\" dia GI pipe length from copper plate to the system to be earthed. The Plate shall be burried at a minimum depth of 4.5 Mtr below ground level on its edge and 2 Mtrs away from building/equipment foundation and shallbe connected to the equipment. The size of the copper flexible shall be not less than 19 mm x 1.6 mm. The item includes labour and materials all complete (but without coke or charcoal and salt). Charcoal and salt cost will be paid seperately as extra. |
| 205 | CHEMICAL EARTHPIT: Supply, installation, testing and commissioning of ACE (Artificial concept of earthing with chemical rod) Chemrod earthing electrode by digging earthing Item includes the supply and installation of the CI/RCC cover in the earth pit, backfilling etc. and construction of chamber; complete including excavation, backfilling and supply of all materials required for making earth pit as per drawings, specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. complete in all respects. |
| 206 | Supply, fixing and connection of 250 V flush type / tumbler Anchor make or approved equivalent switch, socket bell push etc. on perpex sheet on MS box inlcuding supply and fixing of nuts, bolts, etc. but excluding the perpex sheet all complete with labour and materials as per direction of the Engineer-in-Charge.: 3 pins 15 / 16 amps. ISI marked polycarbonate unbreakable plug top |
| 207 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark) 6 amps. - 1 way - SP - 1 module switches |
| 208 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark) 6 amps. - 2 way - SP - 1 module switches |
| 209 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark) 16 amps. - 1 way - SP - 1 module switches |
| 210 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark)6 amps. - 2 / 3 pins combined 2 module shutterred socket |
| 211 | EARTHING PLATE: Supply & Installation of G.I. earthing plate as per standard drawing outside the buildings. The item also includes grouting of the plate as shown in the drawing. The item should be complete in all respect including all materials, tools, tackels etc. and as per direction of EIC / Site engineer. |
| 212 | EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: 50 mm X 6 mm G.I. earthing strip |
| 213 | EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: 40 mm X 5 mm G.I. earthing strip |
| 214 | EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: 25mm x 4 mm copper flat |
| 215 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark)6 / 16 amps. - 3 pins combined 3 module shutterred socket |
| 216 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark)6 pin 25 A modular type socket lSI Marked |
| 217 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark)6 amps. - 1 way - SP - 1 module bell push |
| 218 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark) Two module stepped type electronic fan regulator 100W |
| 219 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark) 2 pins - 1 module telephone socket |
| 220 | EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: Copper cable as per specifications - 10 Sq.mm |
| 221 | Providing salt and charcoal for plate earth electrode as required. 96 kg charcoal and 5 kg salt |
| 222 | Providing salt and charcoal for pipe earth electrode as required. 64 kg charcoal and 5 kg salt |
| 223 | BRICK WORK IN CABLE TRENCH: Removal of bricks from cable trench without any damage to the cable and disposing it within a lead of 50 meteres or stacking it at the edge of the trench and putting it back into the same trench or in a new cable trench as per drawing/ specification within a lead of 50 meteres after the work is completed including completing the work in allrespects with all labour and materials as per the direction of the Engineerin- Charge.: Removal and stacking only |
| 224 | BRICK WORK IN CABLE TRENCH: Removal of bricks from cable trench without any damage to the cable and disposing it within a lead of 50 meteres or stacking it at the edge of the trench and putting it back into the same trench or in a new cable trench as per drawing/ specification within a lead of 50 meteres after the work is completed including completing the work in allrespects with all labour and materials as per the direction of the Engineerin- Charge.: Removal and relaying |
| 225 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark)2 pins telephone plug |
| 226 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark) RJ 11 telephone socket 1 module |
| 227 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark)RJ 45 UTP category 6 - 1 module information outlet - tool less |
| 228 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark)RJ 45 UTP category 6 - 2 module information outlet - tool less |
| 229 | Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. (Accessories to have ISI mark)1 module blanking plate |
| 230 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 3 x 2.5 sqmm LT control cables with copp |
| 231 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 5 x 2.5 sqmm LT control cables with copp |
| 232 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 7 x 2.5 sqmm LT control cables with copp |
| 233 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 10 x 2.5 sqmm LT control cables with cop |
| 234 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 4 x 16 sqmm |
| 235 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 4 x 25 sqmm |
| 236 | Cleaning of cable trenches of depth upto 3 meter and width 1.5 meter of cable galleries, sub stations and other locations etc. The job includes lifting of RCC slabs/ Chequerred plates, removing of paper waste jute, mud, or any other unwanted materials lying in trenches & dumping these waste materials in the nearest dust bin or as directed by the Engineer-in-Charge., keeping back RCC slabs/chequerred plates in positions. All complete with men and materials as per direction of the Engineer-in Charge. |
| 237 | Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres including shoring, strutting etc. (if necessary), backfilling the trench, job complete in all respects, including all labour and materials complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge |
| 238 | WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to original condition and disposing off excess materials (within the work site) job complete in all respects including the cost of labour, tools, materials, load, lift hire charges of equipments, if any, complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge. |
| 239 | Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD upto 20 mm |
| 240 | Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 20 mm and upto 40 mm |
| 241 | Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 40 mm and upto 60 mm |
| 242 | Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 60 mm |
| 243 | Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power Control cables LT : OD upto 20 mm |
| 244 | Cable Laying - Laying of all type of cables HT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables HT |
| 245 | Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD upto 20 mm |
| 246 | Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD above 20 mm and upto 30 mm |
| 247 | Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD above 30 mm and upto 40 mm |
| 248 | Making straight-through joint on 6.6 / 11 KV Aluminium/Copper XLPE/PVC insulated armoured screened cable, including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem / M-seal / 3M), materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: For cables of size upto 3 core x 400 sqmm: HT CABLE JOINT |
| 249 | LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD upto 20 mm |
| 250 | LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 20 mm and upto 40 mm |
| 251 | LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 40 mm and upto 60 mm |
| 252 | LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 60 mm |
| 253 | LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Control cables LT : OD upto 20 mm |
| 254 | HT Cable Termination (6.6/11 KV) - Supply, termination and connection of XLPE cable termination kit (indoor type), heat shrinkable sleeve type of Raychem/M-Seal/CCI make with all accessories, including cutting (tools and accessories for termination should meet the selected standards), stripping of cable insulation providing copper cable end lugs and cable glands as required, restoration of insulation, supplying and providing the cable supporting clamps, straps, cable tags connection to the terminals of HT panel, VFDs, Isolators, transformer, DG,MLPU/Booster pump motors etc., earthing of armouring, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: HT Cable of size above 3Cx240 sq. mm |
| 255 | HT Cable Termination (6.6/11 KV) - Supply, termination and connection of XLPE cable termination kit (indoor type), heat shrinkable sleeve type of Raychem/M-Seal/CCI make with all accessories, including cutting (tools and accessories for termination should meet the selected standards), stripping of cable insulation providing copper cable end lugs and cable glands as required, restoration of insulation, supplying and providing the cable supporting clamps, straps, cable tags connection to the terminals of HT panel, VFDs, Isolators, transformer, DG,MLPU/Booster pump motors etc., earthing of armouring, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: HT Cable of size upto 3Cx240 sq. mm |
| 256 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 4 X 4 Sqmm |
| 257 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 4 X 6 Sqmm |
| 258 | LT CABLE END TERMINATION FOR ARMOURED / PVC INSULATED ALUMINIUM CABLE WITH DOUBLE COMPRESSION FLAME PROOF TYPE BRASS GLANDING (INCLUDING COST OF GLANDS & LUGS) Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved)Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent), wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge 4 x 10 sqmm |
| 259 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 9W, LED Tube Light Fitting, 2FT, 230V AC |
| 260 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 15W, Outdoor LED Light Fitting, IP55, 230V AC |
| 261 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 40W LED Light/Lamp, 230V AC, 50Hz |
| 262 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 45W, Flaimproof LED Light Fitting for hazardous area, 230V AC, 50Hz |
| 263 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 120W LED Flood Light Fitting, with IP65, 230V AC, 50Hz |
| 264 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 40W Flaimproof LED Well Glass Light Fitting, 230V AC, 50Hz |
| 265 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 60W Ceiling Mounted LED Light Fitting |
| 266 | Supply of Zn ribbon Cross section: 25.4 mm x 31.75 mm Weight: 3.57 Kg/ m Material and diameter of core wire: Galvanised steel with diameter 4.7 mm, make as approved by EIC |
| 267 | Laying and installation of Zn ribbon:Work shall include excavating trenches of required width and depth, getting out the excavated soil, and then returning the soil as required in layers, consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed. Installation of Zn Ribbon includes laying of Zn ribbon with backfill material, jointing of ribbons(where required), terminating the cables in the TLP box with cable lugs, sealing material, laying of cable, testing & commissioning of ribbons etc. all complete with required material, excavation, backfilling etc. as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 268 | Supply of XLPE insulated , PVC sheathed cable, 1100 V grade conforming to IS: 7098 (P-1) as per specifications and approved make:Copper Cable size 1cx6 sq.mm Armoured |
| 269 | Supply of XLPE insulated , PVC sheathed cable, 1100 V grade conforming to IS: 7098 (P-1) as per specifications and approved make:Copper Cable size 1cx10 sq.mm Armoured |
| 270 | Laying of anode header / cathode / reference cell cables at a minimum depth of 1 meter and connection to the CP unit / pipeline / half cell etc. The work includes excavation, installation, supply of all required materials such as sealing materials, lugs, PVC sleeve, repair materials etc., and carrying out all works such as exposing pipe, coating repair, cad welding / pin brazing, backfilling etc.,; in all types of strata and soil (including rock) by making the trench, back filling the trench, cable terminations, work complete in all respects including cost of all labour, material, tools etc. as per specification and instruction of Site Engineer / Engineer-In-Charge and approved drawings.1cx25 sq. mm |
| 271 | Laying of anode header / cathode / reference cell cables at a minimum depth of 1 meter and connection to the CP unit / pipeline / half cell etc. The work includes excavation, installation, supply of all required materials such as sealing materials, lugs, PVC sleeve, repair materials etc., and carrying out all works such as exposing pipe, coating repair, cad welding / pin brazing, backfilling etc.,; in all types of strata and soil (including rock) by making the trench, back filling the trench, cable terminations, work complete in all respects including cost of all labour, material, tools etc. as per specification and instruction of Site Engineer / Engineer-In-Charge and approved drawings.2c*6 sq. mm/1c*6 sq. mm |
| 272 | Laying of anode header / cathode / reference cell cables at a minimum depth of 1 meter and connection to the CP unit / pipeline / half cell etc. The work includes excavation, installation, supply of all required materials such as sealing materials, lugs, PVC sleeve, repair materials etc., and carrying out all works such as exposing pipe, coating repair, cad welding / pin brazing, backfilling etc.,; in all types of strata and soil (including rock) by making the trench, back filling the trench, cable terminations, work complete in all respects including cost of all labour, material, tools etc. as per specification and instruction of Site Engineer / Engineer-In-Charge and approved drawings.1cx10 sq. mm |
| 273 | HRC fuses in filter capacitor bank 16A, NS16 TYPE of GE Make or equivalent in fuse holder type NSH |
| 274 | Auto-Transformer for manual control of output. Capacity : 4000 VA continous, Insulation : Class F. Make- RRL or Equivalent. |
| 275 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. LED Light Driver of Flood Lights |
| 276 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 125W Flaimproof IIA/IIB LED Flood Light Fighting, 230V AC, 50Hz |
| 277 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 125W, Flaimproof FTG.EX-D,IIC, LED Flood Light Fighting 230V AC |
| 278 | Auxiliary Transformer for sensing of AC Supply. Impregnated type. Primary :230V ± 20%, Secondary :6 V at 100 mA, Capacity: 1VA . Mak e RRL or equivalent. |
| 279 | Surge Suppressor across SCRs SCR1, SCR2, R-C network, 0.22 µF, 1000 V paper capacitor, 75 Ohm, 5W WW resistor & MOV type: RDN 450/20 , Make- RC- EL-CE- Ar or equivalent and MOV- IGE or equivalent |
| 280 | Surge Suppressor across various diodes- MOV type 275 V RMS, Type: RDN 275/20, Make- IGE or equivalent |
| 281 | Surge Supressor across RC network across Power Transistors- 75 ohms, 5 W resistor in series with 0.25 µF, 1000 V paper capacitor, Ma ke- Philiphs/El-C-R or equivalent |
| 282 | Time Totaliser in AC Input 6 digit , 230 V AC/ 48 V DC operated. Type: UWZ 52, Make- PLA or equivalent |
| 283 | Lighting arrestor at AC input and DC Output- RMS Voltage: 500 V, Max sparkover voltage: 3.0 KV, Impulse Discharge Current: 10 KA, Ma ke- LAMCO or equivalent |
| 284 | Balancing Resistors in Power Transistors T1 & T2 - 75 mOhm, 25 A, Make Iresco or equivalent |
| 285 | 4-20mA Converter Module for PSP Signal. Input :-4 V to 4V DC, Output : 4 to 20mA , Max Load :600Ω, Accuracy:± 0.5%, Aux. Supply : 20 V to 70V, DC, Type : CE-505D Din Rail Type. Make RRL or Equivalent. |
| 286 | PSP Con. Module Operated: 0 to - 4 Vdc, suitable For 50V @ 50A & 25V@25A TRU of Kristron or equivalent Make Din Rail Mounted Width : 22.5/ 55 mm Aux. Supply : 20 To 70 V DC |
| 287 | \\"VOLTAGE CONTROL MODULE SUITABLE FOR TR UNITS OF 50A/50V OR 25A/25V FOR CP I/P=230V AC OR 48 V DC, O/P=0 TO 75V DC of ACTechno Make Din Rail Mounted Width : 22.5/ 55 mm Aux. Supply : 20 To 70 V DC VOLTAGE CONTROL MODULE SUITABLE FOR TR UNITS OF 50A/50V OR 25A/25V FOR CP I/P=230V AC OR 48 V DC, O/P=0 TO 75V DC of Kristron or equ ivalent Make Din Rail Mounted Width : 22.5/ 55 mm Aux. Supply : 20 To 70 V DC\\" |
| 288 | Interrupter timer, Programmable- Digit type with real time clock. 0-999 Sec. ON time & OFF time setting facility by digital key pad . START, STOP & reset Facility or thru local keypad or thru remote potential free contacts. GPS Synchronisable, TYPE : IM 1765ASA, A ux. Supply: 230 V AC, 92 mm x 92 mm cutout mounting type. Make : RRL or Equivalent |
| 289 | Supply of portable GPS Based Current Interrupter/Timer with inbuilt contactor suitable for CP-TR (230Vac /48 DC Operated, DC Output : 50V-50A/ 25 V -25 A) Units of Canara/Kristron or equivalent. |
| 290 | Supply and installation of Hour meter of approved make - KAYCEE/ Rishav or equivalent as per CP Panel requirement |
| 291 | Supply and installation of Energy meter of approved make- Rishav/ Meco/ KAYCEE or equivalent as per CP / Electrical Panel requiremen t |
| 292 | Supply and installation of Gasket in display window of door in CP Panel |
| 293 | Calibration of CP Panel : By authorised party / OEM CP Panels shall be physically inspected, cleaned, interconnection wiring and no rmal operation checked. CP / PSP parameters from CP Panels and TLP shall be taken. Calibration of Working mode (Auto / AVCC/ Manual) , Interrupter setting, Coarse and Fine adjustment shall be done. Anode details such Anode Resistance, current and voltage shall be m easured and calibrated. Calibration of Measuring Instrument- AC Voltmeter, AC Ammeter, DC Voltmeter, DC Ammeter, PSP Meter shall be done with calibrating instructment having valid calibration certificate. AC Ripple Factor, Back EMF, AC Volt DC Output, Working of O ver Protection and Under Protection shall be checked. A detailed report of Calibration of CP Panels in authorised formated shall be submitted signed by NACE (AMPP) CP Level 2 Engineer. Make of CP Panels- Kristron/ Raychem / Canara of 50 V/ 50 A or 25 V/ 25 A rating or as per site installed CP Panels \\" |
| 294 | Supply, installation and testing of Lightning arrestor on top of the MOV buiding or MOV CP buiding for diverting lightning surges to the ground. The work shall include supply of 4 Meter long copper lightning arrestor with 5 spronged phenyl rod base plate etc. comp lete with necessary insulators including supply and fixing of 50 x 6 mm GI earthing strip of required length and connection to the m ain earthing grid. |
| 295 | Supply and fixing of Fire Siren Board for 2.1 kW Fire Siren as per specification. |
| 296 | Cleaning of surface, rust removing of foreign matter, rubbing down thoroughly with emery paper, wire brush, washing with degreasing solvent (white spirit) to remove grease etc. and preparation of surface for application of enamel paint by spray painting on bus duc ts, transformers/motors/ or any other metallic surface with one coat of ready mixed primer and two coats of Approved quality/APCOLIT E ASIAN synthetic enamel paint including supply of paint suitable for a temperature of 100 Degree Celsius. All complete with labour and materials as per directions of the Engineer-in- Charge. |
| 297 | PAINTING OF ELECTRICAL EQUIPMENTS: Cleaning of surface, rust removing of foreign matter, rubbing down thoroughly with emery paper, w ire brush, washing with degreasing solvent (white spirit) to remove grease etc. and preparation of surface for application of paint by spray painting on electrical equipment/ structures/ poles or any other metallic surface with two coats of approved brand and manu facturer Aluminium paint including supply of paint suitable for a temperature of 100 Degree Celsius. All complete with labour and ma terials as per directions of the EIC. |
| 298 | Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD above 20 mm and upto 30 mm |
| 299 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 120W Flaimproof LED Flood Light Fighting, 230V AC, 50Hz |
| 300 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 150W Flaimproof LED Flood Light Fighting, 230V AC, 50Hz |
| 301 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 56W, LED Street Light Fighting weatherproof, 230V AC, 50Hz |
| 302 | WRITING OF EARTH RESISTANCE MEASUREMENT:-Writing in earth pit cover/ stand by taking recent measurement of earthing resistance inclu ding transportation of earthing electrodes, cables etc. from stores to site, drawing the same into the ground at different points fo r measuring the earth resistance. All complete with labour and materials as per drawings, specifications and as per directions of th e Engineer-in-Charge/ Site Engineer. |
| 303 | Supply and topping up the Distilled water in batteries of CP System / DG |
| 304 | Supply and topping up the Diesel (HSD) in DGs of RCPs / SVs |
| 305 | Timer, 24 V DC (0.1 SEC To 3 Minute), Rating -A1DX124 VDC, 0-3 min. Make- EAPL or Equivalent |
| 306 | Glass Fuse, Rating-1A, Make- Phoenix or Equivalent |
| 307 | Supply of XP-1500 Exide (Xpress) New Battery, 12V, 150AH or equivalent Make with buyback of old battery |
| 308 | Supply of XP-1300 Exide (Xpress) New Battery, 12V, 130AH or equivalent Make with buyback of old battery |
| 309 | Supply of Hydrometer (syringe type) suitable to read specific gravity from 1.100 to 1.300 for Battery Bank Maintenance |
| 310 | Supply of Mercury in glass thermometer ( 0℃ to 100℃) for Battery Bank Maintenance |
| 311 | Supply of Rubber Gloves for Battery Bank Maintenance |
| 312 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 90W, LED Street Light Fighting weatherproof, 230V AC, 50Hz |
| 313 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 18W, LED Tubelight Fighting, 230V AC, 50Hz |
| 314 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 09W, LED Bulb/Lamp, 230V AC, 50Hz |
| 315 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 15W, LED Bulb/Lamp, 230V AC, 50Hz |
| 316 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 36W LED Square Recess Down Light Fitting , 230V AC, 50Hz |
| 317 | Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 200W LED weatherproof Flood Light Fitting,, 230V AC, 50Hz |
| 318 | FLAME PROOF FITTINGS - All equipment under this category shall be suitable (minimum requirments) for location in zone-I gas group IIA & IIB (Temp. class T3) area with a separate terminal box for incoming cable and a separate terminal box for out going cable (where applicable), apart from separate enclosure for each equipment including control gear etc. in IP 65 cast aluminium LM-6 certified enclosure: FLAMEPROOF LED WELL GLASS FITTING 90 W, Supply, installation, testing & commissioning of Ex'd' (Flameproof) Well Glass Light Fixture with provision of Cable Entries: 2 Nos. x 3/4\\" ET, Cable Glands: 2 Nos. x 3/4\\" ET (Max. OD 20mm) - Ex'd'(IIA/IIB), Double Compression type, Brass Nickel Plated with PVC Hood. Blanking Plug: 1 No. x 3/4\\" ET - Ex'd', Brass Nickel Plated. Gasket: Neoprene, Hardware: SS 304, Earthing: External 2 Nos. (M6), Internal 1 No. (M5), and as per attached detailed technical specification. |
| 319 | Supply of Insulated Spanner Set for Battery Bank Maintenance |
| 320 | Supply of Acid resistant jugs (2 litre capacity) and funnel for Battery Bank Maintenance. |
| 321 | Supply for Wall mounting teakwood holder for hydrometer, thermometer of Battery Bank Maintenance |
| 322 | Supply of Apron for Battery Bank Maintenance |
| 323 | Supply of Goggles for battery Bank Maintenance |
| 324 | Supply of Petroleum Jelly and application on Battery terminals of Battery Bank |
| 325 | Repair of existing Submersible pump of 1 HP (single phase) for lifting ground water inclusive of cost of all labour, materials, tool s, tackles etc. as per drawings, specifications and direction of EIC/ Site Engineer |
| 326 | Repair of existing Submersible pump of 1 HP (single phase) for dewatering MOV Pit /IJ Pit area inclusive of cost of all labour, mate rials, tools, tackles etc. as per drawings, specifications and direction of EIC/ Site Engineer |
| 327 | Study of 3rd harmonic study of Lightining Arrestor at RCPs/ SVs and submitting its report in the format approved by EIC/ Site Engine er |
| 328 | Supply and installation of Exhaust Fan Cover (Box Type) of adequate size to prevent water and other outside material inside exhaust fan in RCP/ SV building as instructed and approved by EIC/ Site Enginner |
| 329 | Annual/ Half-yearly (except schedule maintenance) or as instructed by EIC/ Site Engineer Maintenance Charges towards Providing Com prehensive Services for the following: 1. Routine oil service in every 500 hrs. or six month whichever is earlier. 2. Repair and maintenance on call as and when fault occurs. 3. Routine maintenance job Details. a. To check all external fasteners. b. To change lube oil. replacement of lube oil filters. c. To check A ir-cleaner element, clean/replace as required. d. To check/clean battery terminals, operation of self-starter a nd service, if required. e. To check working of electrical system and alternator. f. To clean liner and cylinder head fins of air - cooled engine. g. To check radiator fins, if chocked arrange cleaning. h. To cheak engine hour meter and rectify, if require d. i. To check belt alignment/tension, re set as necessary. j. To check fuel line, bleed system, fuel tank and quantity-adequate o r not and report. k. To check /clean button filter on fuel feed pump. check fuel filters and replace, if necessary. l. To check f or leakages in all systeam , as necessary. m. To cheak/ tighten foundation bolts, coupling bolts. n . Run engine on no load for 5 mi nutes and check . i. Working of all gauges and meters. ii. any abnormality and vibration. correct these. if necessary. o. To cheak tubocharger, pip ing & lubrication of turbocharger ( if applicable) p. To cheak all wires, terminals and connection and rectify , if required (of en gine) q. To cheak all reays, connectors, transformers etc. and rectify, if required (of en gine). r. To check heating of all apparatus and components(mechanical and electical) of the ENGINE system. s. To suggest necessity of overhauling of the ENGINE. p. To cheak all wires, terminals and connection and rectify , if required (of engine) q. To cheak all reays, connectors, transformers etc. and rectify, if required (of engine). r. To check heating of all apparatus and components(mechanical and electical) of the ENGINE system. s. To s uggest necessity of overhauling of the ENGINE.\\" |
| 330 | Remote Monitaring System (RMS), Model No-65027969, DV 2.858.29.0. PR, Make- Koel or Equivalent as instructed by EIC/ Site Engineer |
| 331 | Supply and installation of Gland of DG as instructed by EIC/ Site Engineer |
| 332 | Supply and installation of CT (Current Transformer)-(1) Tcc 4514, S/N-2012014484, (2) TCC-7396, S/N-2012014516, (3)TCC -8726, S/N-20 12014510, as instructed by EIC/ Site Engineer |
| 333 | Supply and installation of Lube Oil Filter in DG Panel |
| 334 | Supply and installation of Fuel Oil Filter in DG Panel |
| 335 | Supply and installation of coolant as instructed by EIC/ Site Engineer |
| 336 | Supply and installation of tubular OPzS type lead acid battery 2V 500 AH(Exide or equivalent)- Single cell |
| 337 | Supply of SMPS, Input 230VAC, Output 12VDC, 2A as per direction of Engineer-in-Charge. |
| 338 | Supply and installation of Printed/letter engraved Alluminium instrument tags as per direction of Site Engineer/EIC as and when requ ired |
| 339 | Supply and installation of inverter 2 KVA- without batteryMicrotek or equivalent at RCP/SV |
| 340 | Suppply and installation of 12V SMF battery 150 AH (Exide/Amaron or equivalent) |
| 341 | Supply of 1 A glass fuse packet( 10 nos) and 0.5 A packet(10 nos.) and 0.25 A packet(10 nos.) and fire alarm 5 A fuse packet(10 nos .):[ Supply of all] |
| 342 | Supply of DC-DC converter 48 V DC to 24 V DC- Weidmuller or equivalent |
| 343 | MAINS ON idicator lamp (240V AC LED type) of Make Teknic or equivalent housed in 22.5mm dia, holder |
| 344 | Ref. Voltmeter Selector Switch 6 WAY 2Pole , 6A, CAM Type of Salzer/Kaycee / Equivalent Make |
| 345 | AC MODE POWER SUPPLY CARD CECO 103A /KS103A FOR CP TR UNIT |
| 346 | DC MODE POWER SUPPLY CARD CECO 103B /KS103B FOR CP TR UNIT |
| 347 | CONTROL AMPLIFIER CARD CECO 104C /KS104C FOR TR UNIT |
| 348 | AC/DC FIRING CARD CECO 105D1 / KS 105D1 FOR TR UNIT |
| 349 | AUTOMATIC TR EFERENCE SELECTOR CARD CECO 106/KS106 FOR TR UNIT |
| 350 | DC-DC CONVERTER DRIVER CARD CECO 30/KS 52 |
| 351 | FULLY ASSEMBLED MOTHER BOARD MB01 |
| 352 | FULLY ASSEMBLED DISPLAY BOARD DB01 |
| 353 | Voltage Transducer-415 VAC, Output-4 to 20mA, Aux. Supply-240VAC, Make- AE or Equivalent |
| 354 | Supply and installation of Over voltage/Under voltage, Relay -Model PR-07, VMR3P(REL) Supply limit -200-500 V AC, Make- Rishav or Eq uivalent as instructed by EIC/ Site Engineer |
| 355 | FLAME PROOF FITTINGS - All equipment under this category shall be suitable (minimum requirments) for location in zone-I gas group IIA & IIB (Temp. class T3) area with a separate terminal box for incoming cable and a separate terminal box for out going cable (where applicable), apart from separate enclosure for each equipment including control gear etc. in IP 65 cast aluminium LM-6 certified enclosure: FLAMEPROOF LED WELL GLASS FITTING 125 W, Supply, installation, testing & commissioning of Ex'd' (Flameproof) Well Glass Light Fixture with provision of Cable Entries: 2 Nos. x 3/4\\" ET, Cable Glands: 2 Nos. x 3/4\\" ET (Max. OD 20mm) - Ex'd'(IIA/IIB), Double Compression type, Brass Nickel Plated with PVC Hood. Blanking Plug: 1 No. x 3/4\\" ET - Ex'd', Brass Nickel Plated. Gasket: Neoprene, Hardware: SS 304, Earthing: External 2 Nos. (M6), Internal 1 No. (M5), and as per attached detailed technical specification. |
| 356 | Supply, fixing and connection of Philips/approved equivalent make LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage-Venture range-Venture of 150 to 265 Volts AC, P.F > 0.9, Surge-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge. 6W |
| 357 | Supply, fixing and connection of Philips/approved equivalent make LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage-Venture range-Venture of 150 to 265 Volts AC, P.F > 0.9, Surge-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge. 9W |
| 358 | Supply, fixing and connection of Philips/approved equivalent make LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage-Venture range-Venture of 150 to 265 Volts AC, P.F > 0.9, Surge-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge. 18W |
| 359 | Supply, fixing and connection of Philips/approved equivalent make LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE- Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge 12W |
| 360 | Supply, fixing and connection of Philips/approved equivalent make LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE- Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge 15W |
| 361 | Supply, fixing and connection of Philips/approved equivalent make LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE- Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge 24W |
| 362 | Supply, fixing and connection of Philips/approved equivalent make LED COB Down lighter, suitable for Recessed mounting made of presssure diecast alluminium housing with powder coating, with high efficiency reflector , operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LED's having efficacy of > 120 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge. 45W |
| 363 | REWINDING OF MOTORS: Rewinding of 1-phase/3-phase electrical motors of various voltage grades/makes/types and of following capacities as per the original specifications & types/gauge of rewinding/winding wire, insulation of various points inside slots/overhang and overall final layers of insulation/tapes as per the original motor specifications, after baking to required temperature and applying insulating varnish (Dr-Beck & Co. make & type), providing glass/other types of sleaves on connection wires from inside motor winding to connection plate. The winding, varnishing, tapes and other materials required for completion of this complete job is in the scope of contractor excluding transportation to & from Owner’s works to Contractor's rewinding shop. which shall be paid seperately on trip basis.The winding wire will be Devi Dayal make and insulation tapes shall be ISI marked & of reputed manufacturers as per decision of Engineer-in- Charge. This also includes repair/replacement of connection plate completely including insulating sheet, nuts, bolts, washers and other hardwares as per original specifications. This further includes replacement of bearings (DE & NDE) of SKF make & greasing (IOC/HP make Servogem 2 or equivalent). This further includes satisfactory trial of motors at Owner’s premises at No load as well as at Full load. The Contractor will guarantee the rewound motors for satisfactory performance for a period of minimum six months at owner’s premises & if any such rewound motor fails within six months, it is to be rewound again by Contractor free of cost. All complete with labour and materials as per directions of Engineer-in-Charge.Note: Burnt winding wire shall be kept by Contractor. Bearing Shall be supplied by IOCL Motors upto & including 1.5 KW |
| 364 | REWINDING OF MOTORS: Rewinding of 1-phase/3-phase electrical motors of various voltage grades/makes/types and of following capacities as per the original specifications & types/gauge of rewinding/winding wire, insulation of various points inside slots/overhang and overall final layers of insulation/tapes as per the original motor specifications, after baking to required temperature and applying insulating varnish (Dr-Beck & Co. make & type), providing glass/other types of sleaves on connection wires from inside motor winding to connection plate. The winding, varnishing, tapes and other materials required for completion of this complete job is in the scope of contractor excluding transportation to & from Owner’s works to Contractor's rewinding shop. which shall be paid seperately on trip basis.The winding wire will be Devi Dayal make and insulation tapes shall be ISI marked & of reputed manufacturers as per decision of Engineer-in- Charge. This also includes repair/replacement of connection plate completely including insulating sheet, nuts, bolts, washers and other hardwares as per original specifications. This further includes replacement of bearings (DE & NDE) of SKF make & greasing (IOC/HP make Servogem 2 or equivalent). This further includes satisfactory trial of motors at Owner’s premises at No load as well as at Full load. The Contractor will guarantee the rewound motors for satisfactory performance for a period of minimum six months at owner’s premises & if any such rewound motor fails within six months, it is to be rewound again by Contractor free of cost. All complete with labour and materials as per directions of Engineer-in-Charge.Note: Burnt winding wire shall be kept by Contractor. Bearing Shall be supplied by IOCL Motors upto & including Motors above 1.5 KW but upto including 3.7 kW |
| 365 | DISMANTLING OF CEILING FANS AND EXHAUST FANS Dismantling of all types & sizes of ceiling fans with down rod and regulator and exhaust fans of sweep 350/450 mm alongwith shutter, frame etc. without damage and returning them to our stores or any other place or site within the premises as decided by the Engineer-in- Charge. all complete with labour and materials including dismantling of supports of any type, down rods, condensers and any other accessories as per the directions of the Engineer-in-Charge. |
| 366 | Fixing of wall mounted fan/ceiling fan completed with lead inwires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of Fans shall be excluded) |
| 367 | Fixing of exhaust fans on existing opening, complete with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of fans shall be excluded): WITHOUT LOUVER SHUTTER/MESH |
| 368 | Supplying and fixing of 76mm x38mm thick wooden round block along with other accessories on surface as required. |
| 369 | REWIINDING OF FANS Rewinding of ceiling/pedestal/exhaust/air circulator fans of all types/sizes/make including 1-phase and 3-phase type exhaust fans max. upto 2.2 KW capacity and supply of super enameled winding wire (Devi Dayal make, ISI marked insulation materials required). This also includes replacement of single/double bearing SKF make/bushes (as per original make) and overhauling of fan and all jobs related to complete this work in totality. This also includes removal of fans from site, installation and commissioning after testing of rewound fans and replacement of condenser, if required. This also includes transportation from site after dismantling to Contractor’s workshop and back to site. Note: Contractor has to give guarantee for rewinding of above items for a period of six months and if winding is burnt again within six months of working of fans, it has to be rewound again of Contractor. The burnt winding shall be kept by Contractor. Ceiling/pedestal fans |
| 370 | REWIINDING OF FANS Rewinding of ceiling/pedestal/exhaust/air circulator fans of all types/sizes/make including 1-phase and 3-phase type exhaust fans max. upto 2.2 KW capacity and supply of super enameled winding wire (Devi Dayal make, ISI marked insulation materials required). This also includes replacement of single/double bearing SKF make/bushes (as per original make) and overhauling of fan and all jobs related to complete this work in totality. This also includes removal of fans from site, installation and commissioning after testing of rewound fans and replacement of condenser, if required. This also includes transportation from site after dismantling to Contractor’s workshop and back to site. Note: Contractor has to give guarantee for rewinding of above items for a period of six months and if winding is burnt again within six months of working of fans, it has to be rewound again of Contractor. The burnt winding shall be kept by Contractor. Exhaust/air circulators fans. |
| 371 | OVERHAULING OF EXHAUST / AIR CIRCULATOR FANS Overhauling of exhaust/air circulator fans of various types/sizes makes and its bearings including removal from site, cleaning, greasing after degreasing, assembling and fixing in position, testing and commissioning including transportation from site to workplace and back all complete with labour and materials as per directions of Engineer-in-Charge. Including supply and fixing of bearings of SKF make (02 Nos. bearings) |
| 372 | OVERHAULING OF CEILING / PEDESTAL FANS Overhauling of ceiling/pedestal fans of various types/ sizes/make and its bearings including removal from site, cleaning, greasing after degreasing, assembling and fixing in position, testing and commissioning including transportation from site to workplace and back. All complete with labour and materials as per directions of Engineer-in-Charge. Excluding the cost of bearings. (Bearings if necessary will be supplied by Owner. |
| 373 | OVERHAULING OF CEILING / PEDESTAL FANS Overhauling of ceiling/pedestal fans of various types/ sizes/make and its bearings including removal from site, cleaning, greasing after degreasing, assembling and fixing in position, testing and commissioning including transportation from site to workplace and back. All complete with labour and materials as per directions of Engineer-in-Charge. Including supply and fixing of bearings of SKF make and bushes (as per original make) of both sides by Contractor. |
| 374 | Supply, installation, testing and commissioning of ceiling fans of Bajaj/Crompton Greaves/Khaitan/Usha make only including supply and fixing of the electronic regulators with all necessary supports. All complete with labour and materials as per drawings, specifications and directions of EIC/SE :1200 MM SWEEP (WHITE) |
| 375 | Supply, installation, testing and commissioning of single phase , Fresh Air Fans / Heavy duty Exhaust Fans of Bajaj/Crompton Greaves/Khaitan/Usha make only including supply and fixing with all necessary supports All complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge.. NOTE: Necessary civil works required for fixing the exhaust fans shall be in the scope of Contractor. HEAVY DUTY EXHAUST FAN WITH LOUVER SHUTTER 300MM SWEEP, 900 RPM |
| 376 | Supply, installation, testing and commissioning of single phase , Fresh Air Fans / Heavy duty Exhaust Fans of Bajaj/Crompton Greaves/Khaitan/Usha make only including supply and fixing with all necessary supports All complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge.. NOTE: Necessary civil works required for fixing the exhaust fans shall be in the scope of Contractor. HEAVY DUTY EXHAUST WITH LOUVER SHUTTER 450MM SWEEP, 900 RPM |
| 377 | Supply, installation, testing and commissioning of Wall Mounted Fans of Bajaj/Crompton Greaves/Khaitan/Usha make only including supply and fixing of the electronic regulators with all necessary supports. All complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge. NOTE: Necessary civil works required for fixing the exhaust fans shall be in the scope of Contractor.: OSC. WALL & CABIN FANS OF 300MM SWEEP |
| 378 | Cleaning of complete PCC/MCC panels. It includes opening of side top covers, removal of dust by vacuum cleaners/blowers etc., checking and tightening of screws, nuts, bolts, washers & connections, application of petroleum jelly and boxing up of the panels. All complete with labour and materials as per directions of the Engineer-in-Charge. |
| 379 | Measurement of earthing resistance including transportation of earthing electrodes, cables etc. from stores to site, drawing the same in to the ground at different points for measuring the earth resistance. The job includes the supply of connecting leads, clampsetc. All complete with labour and materials as per drawings, specifications and directions of the Engineer-in-Charge.NOTE Measuring instruments to be supplied by the Owner |
| 380 | CLEANING OF LIGHT FITTING FIXTURES: Cleaning of below given fitting fixtures alongwith perfex cover (wherever applicable) with the help of surf powder. It includes the removal of perfex cover, washing the lighting fixture with powder, cleaning with fresh water and clothes and refixing in the same position. It also includes arranging ladder as and wherever required, providing scaffolding at all heights with necessary tools & tackles. All complete with labour and materials as per directions of the Engineer-in-Charge. Street light fitting |
| 381 | CLEANING OF LIGHT FITTING FIXTURES: Cleaning of below given fitting fixtures alongwith perfex cover (wherever applicable) with the help of surf powder. It includes the removal of perfex cover, washing the lighting fixture with powder, cleaning with fresh water and clothes and refixing in the same position. It also includes arranging ladder as and wherever required, providing scaffolding at all heights with necessary tools & tackles. All complete with labour and materials as per directions of the Engineer-in-Charge. Tube light fitting/ceiling/exhaust fan/fan at any height inside a building. |
| 382 | CLEANING OF LIGHT FITTING FIXTURES: Cleaning of below given fitting fixtures alongwith perfex cover (wherever applicable) with the help of surf powder. It includes the removal of perfex cover, washing the lighting fixture with powder, cleaning with fresh water and clothes and refixing in the same position. It also includes arranging ladder as and wherever required, providing scaffolding at all heights with necessary tools & tackles. All complete with labour and materials as per directions of the Engineer-in-Charge. MLL/HPMV/HPSV lamp of FLP /increased safety/ weather proof or any other similar fittings upto 250 W |
| 383 | Solid State Decoupling Device |
| 384 | Grounding Cells |
| 385 | Spark Gap Surge Arrestor for above ground and under ground suitable for 100 kA lightening Impulse Current (10/350 micro s), rated spark over voltage <= 1.25 kV in flameproof weatherproof enclosure Ex d IIC, IP 66 with connecting cable (EXFS 100 KU of Dehn or eq.) |
| 386 | Junction Box having IP-42 degree of protection |
| 387 | Junction Box having IP-55 degree of protection |
| 388 | Flameproof & weatherproof Anode Junction Box of approved make |
| 389 | Supply of Flameproof & weatherproof CJB with accessories for distribution of current among pipelines as per technical specification. |
| 390 | DC distribution board with one incomer, 100 A DP MCB & outgoing feeders 1x63A DP MCB & 2x32 A DP MCB |
| 391 | Copper Cable size 1cx50 sq. mm Armoured |
| 392 | Copper Cable size 1cx35 sq. mm Armoured |
| 393 | Copper Cable size 1cx25 sq.mm Armoured |
| 394 | Copper Cable size 2cx6 sq.mm Armoured |
| 395 | Copper Cable size 2cx25 sq.mm Armoured |
| 396 | Copper Cable size 2cx70 sq.mm Armoured |
| 397 | Copper Cable Kynar/HMWPE size 1cx10 sq.mm Unarmoured for distributed anodes of station CP system |
| 398 | Supply of Cu- Cuso4 Permanent Half cell with minimum 10 m length of tail cable, as per specifications of approved make |
| 399 | Supply of Cu- Cuso4 portable Half cell, as per specifications of approved make |
| 400 | Supply of Digital Multimeter with data logging, trend capturing and graphic display facility like Fluke 289 or eq. as per technical specification. |
| 401 | Supply of Four pin Soil Resistivity Meter with output maximum 80 wattt / upto 200 mA stabilised current output as per technical specification. |
| 402 | Installation of solid state decoupling device as per specifications including terminating the cables in the TLP box with cable lugs, sealing material, laying of cable, testing & commissioning of Zinc anodes etc. all complete with required material, excavation, backfilling etc. as per specification and directions of Site Engineer/ Engineer-in-Charge. |
| 403 | Installation of grounding cells including terminating the cables in the TLP box with cable lugs, sealing material, laying of cable, testing & commissioning of grounding cell etc. all complete with required material, excavation, backfilling etc. as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 404 | Installation of surge arrestors including terminating the cables, testing & commissioning of surge arrestors etc. all complete with required material as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 405 | Installation of Permanent half cells including connecting the cable in the TLP etc. with cable lugs, sealing material, laying of cable, testing & commissioning of cell etc. all complete with required material, excavation, backfilling etc. as per specifications, recommendation of cell supplier and directions of Site Engineer / Engineer-in-Charge. |
| 406 | Conducting \\" Coating-Resistance Survey\\" for calculation of specific coating resistance of the pipeline in ohms.sq.m. along the entire pipeline and submitting the report in hard as well as soft copy as per Specification / approved procedure and directions of Site Engineer / Engineer-in-Charge. |
| 407 | Conducting Close Interval Potential Logging Survey at an interval of 1 m over the buried line in the right of way including the cost of all competent manpower, transportation and camping facilities etc. to their employees, materials, test instruments, equipments, consumables etc., required for the survey as per the standard specifications, and approved procedures identification of areas/locations where coating repair is required alongwith suggestion for remedial measures etc. including the submission of draft reports in 2 sets and incorporation of owner's comments in the draft report and final reports in 3 sets including one soft copy containing the survey results in the graphical as well as tabular forms computerised colour print and complete in all respects and directions of Site Engineer / Engineer-in-Charge.:Close Interval ON/OFF Potential logging survey |
| 408 | Conducting Close Interval Potential Logging Survey at an interval of 1 m over the buried line in the right of way including the cost of all competent manpower, transportation and camping facilities etc. to their employees, materials, test instruments, equipments, consumables etc., required for the survey as per the standard specifications, and approved procedures identification of areas/locations where coating repair is required alongwith suggestion for remedial measures etc. including the submission of draft reports in 2 sets and incorporation of owner's comments in the draft report and final reports in 3 sets including one soft copy containing the survey results in the graphical as well as tabular forms computerised colour print and complete in all respects and directions of Site Engineer / Engineer-in-Charge.:Close Interval Natural Potential Logging Survey |
| 409 | Conducting Direct Current Voltage Gradient Survey over the buried line, logging all measurements, to identify / pin point the coating defects on pipeline including the cost of all competent manpower, transportation and camping facilities etc. to their employees, materials, test instruments, equipments, consumables etc., required for the survey as per the standard specifications and approved procedures, identification of areas/locations where coating repair is required alongwith suggestion for remedial measures etc. including the submission of draft reports in 2 sets and incorporation of owner's comments in the draft report and final reports in 3 sets including one soft copy containing the survey results in the graphical as well as tabular forms computerised colour print and complete in all respects as per directions of Site Engineer / Engineer-in-Charge.Note : The item includes establishing the coating defect at specified locations by excavation in coordination with mainline contractor, who will arrange to repair the defects. |
| 410 | Conducting \\"Soil Resistivity Survey\\" at anode bed location after ascertaining its suitablity with respect to the existing system , for installation of Anode Bed (deep / shallow / distributed), as per the specification, approved procedures and instructions of Site Engineer / Engineer-in-Charge. |
| 411 | Conducting AC interference survey, to detect presence of any AC voltage(induced owing to proximity of any HT transmission line (33 KV and above) crossing or running parallel within a distance of 60 M from the pipeline alignment as per approved procedure. The work shall be completed in all respects including survey, data logging for specified period, recommending mitigation measures & post mitigation survey. The work includes all tools, tackles, consumables etc. all complete, required for survey / test as deemed necessary and as per the directions of the site engineer / Engineer-in-Charge.Note : AC interference survey shall be done at respective TLP by connecting data logger to maintain record for minimum 24 hours. The data to be submitted for each such TLP alongwith coloured graph and recommendations. |
| 412 | Conducting Mututal Interference Survey among the new and existing pipelines / facilities /foreign pipeline by taking PSP survey of all the pipelines as per approved procedure to determine level of interference at different places along the pipeline and at point of crossing in common ROW including identifying points and providing the data/ record in graphical form and carrying out all necessary work for mitigating the interference observed among the pipelines , including retesting the same to ensure efficacy of the remedial measures undertaken.The contractor shall submit a full final report with detailed PSP readings at all TLPs along with graphs in 3 sets.The item should be complete in all respect including survey, work for mitigating the interference and post mitigating survey as per specifications/directions of site engineer / Engineer-in-Charge. |
| 413 | Conducting Pearson Survey over the buried line in the right of way including the cost of all competent manpower, transportation and camping facilities etc. to their employees, materials, test instruments, equipments, consumables etc., required for the survey as per the standard specifications, identification of areas/locations where coating repair is required alongwith suggestion for remedial measures etc. including the submission of draft reports in 2 sets and incorporation of owner's comments in the draft report and final reports in 3 sets including one reproducible containing the survey results complete in all respects |
| 414 | Carrying out the Current Attenuation(CAT) Survey at 50 meters interval by measuring current loss along the mainline pipe and using Radio Detection Instruments. Completing the entire work as per specification and EIC`s direction including all equipments with its accessories etc.tools, tackles, Battery transportation (Vehicle), related equipments,consumables, if any labour /manpower and any / all relevant data collection as may be deemed necessary for carrying out the survey and interpretation /presentation of the results including submission of reports complete in all respect thereof. Also locating the exact position of buried pipeline/defect of Pipeline coating.Route mapping of the entire stretch at an interval of 10M with the help of GPS instrument (to be arrange by contractor)and submission of the hard and soft copy to the EIC. |
| 415 | Installation of CJB / AJB as per technical specifications. |
| 416 | Installation and commissioning of wall mounted DCDB including supply of all cable end lugs, cable glands, fittings & fixtures and all other required accessories, tools and tackles complete in all respects as per directions of Site Engineer/Engineer-in-charge. Item includes supply and termination of 2 runs of 1cx25 sq. mm copper cable for Battery Bank |
| 417 | Measuring, recording and submitting the cathodic protection readings along the entire pipeline by repeated adjustments of the settings of the CPTR/CPPSM units etc as per specifications for achieving full/maximum protection of all the stretches as per the criteria of protection mentioned in the specifications. Measuring the relevant readings at the cathodic protection stations and \\"pipe to soil potential\\" readings at all the test lead locations along the pipeline including the CP station parameters like current(AC/DC), voltage(AC/DC),circuit resistance,battery voltage/current etc.,preparing and submitting pipe to soil potential profile, graphs and other data pertaining to the cathodic protection of the pipeline,job complete in all respects as per specification and instructions of Site Engineer / Engineer-in-Charge, including cost of all labour, instruments and services rendered. |
| 418 | Pipe to Soil potential Readings : Measurement, recording and submission of Pipe to Soil Potential readings by connecting / disconnecting the Mg anodes (for achieving optimal protection through TLPs) along the entire pipeline and at stations, including preparing and submiting relative PSP profile and other relevant data pertaining to the cathodic protection of the pipeline, including cost of all labour, instruments and services rendered. The readings shall be furnished as per the specifications and as per the directions of the Site Engineer/Engineer-in-Charge |
| 419 | Zinc Anode for Hot spot protection : Supply, Installation , testing and commisioning of Zinc anode (minimum 10 Kg each) including its tail cable of size of 1c x 25 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, special back-fill material ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling etc. as per specifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall be carried out as per the directions of the Site Engineer / Engineer-in-Charge and as per AFC drawings. |
| 420 | Cable MarkerSupply, erection and installation of MS cable markers; including excavation,installation of the markers,cement concrete grouting, back-filling etc. required as per drawings, specifications and directions of the Site Engineer,including the cost of all materials, labour,tools etc. complete in all respects as per the directions of Site Engineer / Engineer-in-Charge. |
| 421 | Magnesium Anode : Supply, Installation , testing and commisioning of Magnesium anode (minimum 5 Kg each) including its tail cable of size of 1c x 10 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, special back-fill material ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling etc. as per specifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall be carried out as per the directions of the EIC/ Site Engineer and as per AFC drawings. |
| 422 | Type A (With Ingress Protection IP:55) |
| 423 | TLP type \\"A\\" , flame proof & weather proof as per specifications and drawing (With inbuilt provision of Voltmeter & pushbutton for PSP Measurment) |
| 424 | Type B (With Ingress Protection IP:55) |
| 425 | Type B (Flameproof & Weatherproof as per specifications & drawing) (With inbuilt provision of Voltmeter & pushbutton for PSP Measurment) |
| 426 | Type C (With Ingress Protection IP:55) |
| 427 | Type D (With Ingress Protection IP:55) |
| 428 | Type DAC (With Ingress Protection IP:55) |
| 429 | Flameproof Type E (With Ingress Protection IP:55) as per specification |
| 430 | Flameproof Type DMV (With Ingress Protection IP:55) as per specification |
| 431 | Supply and Installation of prefabricated CS corrosion coupon with 1 sq. cm bare metal with 2 numbers 4 sq. mm lead of minimum 10 m long lead in a sdistance of 0.5 m from the pipeline inclusive of cable & terminating the cable in the TLP terminal. The corrosion couponf are to be installed with specified test lead points for which prior apporval to be obtained from owner. The item also incluseds supply, installation, laying & termination of all CU cables of required length (as per site condition) and size as mentioned in the standard drawing, toggle switch, cable glands and lugs etc. , complete in all respect as per the direction and specification detailed in the documetn complete with all tools , takles & other necessary requirement for preparation of the coupon . The work complete in all respect shall include supply of all the labours, tols etc. compete as per the direction of site engineer/engineer in charge. |
| 432 | Supply, installation, testing and commissioning of two separate 4-20 mA converters(0-20 mV Input, 0 to-2VDC input respectively, 2x4-20 mA Output in each converter) in pre installed TLPs at SV/IPIG/CP locations as per the approved drawings and specification detailed in the document complete with tools, tackles & other necessary requirement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge. |
| 433 | Preparation & installation of corrosion coupon from owner supplied coated pipe. which involves preparation of sample of size 2\\"x4\\", application of pipeline coating material on the coupon, soldering 6 sq. mm. cable with coupon, sealing the soldered joint with epoxy, positioning the coupon at the pipe line depth and with in a distance of 0.5 M from the pipeline inclusive of cable & terminating the cable in the TLP terminal. The corrosion coupons are to be installed with specified Test lead points for which prior approval to be obtained from Owner. The item also includes supply, installation / laying & termination of all XLPE, Cu cables of required length (as per site conditions) and size as mentioned in the standard drawings, toggle switch, cable glands and lugs etc., complete in all respect. All as per the direction and specification detailed in the document complete with tools, tackles & other necessary requirement for preparation of the coupon. The work complete in all respect shall include supply of all labour, tools etc complete as per the directions of the Site Engineer. |
| 434 | Supply of Pressure Indicators (PI) of the range (-1) to 5 Kg / Cm2 as per the technical specifications attached in the Tender. |
| 435 | Supply of Pressure Indicators (PI) of the range 0 to 10 Kg / Cm2 as per the technical specifications attached in the Tender. |
| 436 | Supply of Pressure Indicators (PI) of the range 0 to 20 Kg / Cm2 as per the technical specifications attached in the Tender. |
| 437 | Supply of Pressure Indicators (PI) of the range 0 to 40 Kg / Cm2 as per the technical specifications attached in the Tender. |
| 438 | Supply of Pressure Indicators (PI) of the range 0 to 100 Kg / Cm2 as per the technical specifications attached in the Tender. |
| 439 | Supply of Pressure Indicators (PI) of the range 0 to 200 Kg / Cm2 as per the technical specifications attached in the Tender. |
| 440 | Gauge Saver (0-1 Kg/Cm2) |
| 441 | Supply of flame proof and weather proof fittings including EP/WP certificates as per the technical specifications attached. |
| 442 | FLP/ WP Junction Box, Type C. (Nos. of terminals: 60 Nos.; Bottom entry: 1 No. - 1 1/4\\" & 1 No.- 1\\"; Left side entry: 1 No. - 1\\" & 3 Nos.- 1/2\\"; Right side entry: 2 No. - 1\\" & 2 Nos.- 1/2\\") along with FLP cable glands & FLP plugs for all the cable entries of the Junction as per technical specifications. |
| 443 | FLP/ WP Junction Box, Type D. (Nos. of terminals: 24 Nos.; Bottom entry: 1 No. - 1\\"; Left side entry: 3 Nos.- 1/2\\"; Right side entry: 3 Nos.- 1/2\\") along with FLP cable glands & FLP plugs for all the cable entries of the Junction as per technical specifications. |
| 444 | FLP/ WP Emergency Shut Down Push Button Switch (with 2 nos. cable entry provision of 1/2\\" NPT) with steel hammer chained with main unit. |
| 445 | Supply of Cable Glands - flame proof and weather proof including EP/WP certificates: |
| 446 | 1 1/4\\" (5/4\\") |
| 447 | Supply of Plugs - flame proof and weather proof including EP/WP certificates: |
| 448 | Supply of Reducers - flame proof and weather proof including EP/WP certificates: |
| 449 | 1\\" to 1/2\\" Reducers |
| 450 | 1\\" to 3/4\\" Reducers |
| 451 | 3/4\\" to 1/2\\" Reducers |
| 452 | Supply and placing in position 5 mm thick steel checkered plates over cable ducts, valves, pits etc including keeping provision of holes for lifting arrangement and providing lifting arrangement complete in all respect inclusive of cost of all labour, material, carriage etc as per specification & the direction of the engineer in-charge/site engineer |
| 453 | Cat 6 UTP (LAN) Networking Cable as per tender specifications |
| 454 | 8 port Industrial Grade Network Switch with Optical Interfaces as per tender specifications |
| 455 | 24 port Industrial Grade Network Switch with Optical Interfaces as per tender specifications |
| 456 | Power cable 3 core x 2.5 mm2 Armoured, Copper as per tender specifications |
| 457 | 600 VA UPS with battery back-up for LAN switch |
| 458 | 19/25 mm ISI marked GI conduit along with all fittings & fixtures like Tees, bends, junction boxes, etc for installation of detectors in buildings |
| 459 | Laying of HDPE Pipe in trenches/ walls/ concrete structure/ panels etc. as per specifications & drawings & blowing/ laying of Owner supplied Aurmoured/Unarmoured Optical Fibre Cable in HDPE pipe, carrying out end to end testing of laid Optical fibre cables by taking OTDR traces and submitting the OTDR trace printouts to Site Engineer/ Engineer-in-charge. The job includes the supply and installation of required materials such as fixing clamps, screws, tags etc. as required to complete the job in all respects as per drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, test instruments, materials etc. The job includes handing over the tested cables to the Telecom Works Contractor and providing necessary assistance/ support to the Telecom Works Contractor in commissioning of Local Area Network. |
| 460 | CABLE TRENCH: Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres including shoring, strutting etc. (if necessary), backfilling the trench with excavated earth, as directed by Site Engineer, including all labour and materials complete as per drawings, specification and directions of Site Engineer. |
| 461 | WBM ROAD / CONCRETE BREAKING: WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to original condition and disposing off excess materials (within the work site) as per specifications and direction of the Site Engineer, job complete in all respects including the cost of labour, tools, materials, load, lift hire charges of equipments, if any. |
| 462 | CABLE LAYING: Laying of armoured / unarmoured cables (control / signalling/ Triad/ LT cable etc.) and installation / pulling of telephone cables of all type in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels, in buildings, walls, ceilings, and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect,as per specifications,drawings and directions of the SiteEngineer, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths |
| 463 | Cables having outer diameter upto 20mm |
| 464 | Cables having outer diameter between 20 to 30 mm |
| 465 | Cables having outer diameter above 30 mm |
| 466 | Installation, testing and commissioning of Pressure Indicator (PI) of various ratings as per drawings, recoomendations of OEM and directions of Engineer in-charge/ Site engineer |
| 467 | Taking delivery, shifting within a road distance of 500 meters and installation & testing of the differnt instruments (like pressure Gauge, Pressure Switch, Pressure Transmitter, temperature transmitter, scrapper detector, level switch, level transmitter, flow switch etc.) of various ratings by fabrication and installing all the required pipe fittings with pressure pipes, valves, plugs, tees, nipples, junction box, cables, supply and erection of all other required materials such as the supporting structure clamps, cannopy, screws, nuts, bolts, aluminium sheets, GI wire, steel plats, cement concrete etc. complete in all respects including supply of suitable size non flame proof cable gland at control panel end and terminating the already laid cables at field, junction box and control panel end, mounting the junction boxes as per the Drawings, specifications and directions of the engineer in-charge/site engineer including cost of all labour, materials, consumables, tools, tackles and services rendered etc. All the instruments shall have to be properly connected to the earth pit through GI wires. The works shall include labelling, tagging using SS plates, glanding and ferruling at both field and panel side. Installation to be done as per OEMs recommendations, vendor drawings and other approved drawings. The scope also shall include Calibration of instruments, hydro-testing of Impulse tube, providing assistance in testing and commissioning of the instruments to control system vendor along with loop checking etc. |
| 468 | INSTALLATION OF PT / PS: Installation, assistance in testing and commissioning of Pressure Transmitter (PT) / Pressure Switch (PS) of various ratings as per the directions of Engineer in-charge/ Site engineer and drawings. |
| 469 | INSTALLATION OF REMOTE SEAL PT: Installation, assistance in testing and commissioning of Remote Seal Pressure Transmitter (RSPT) as per the directions of Engineer in-charge/ Site engineer and drawings. |
| 470 | INSTALLATION OF SURFACE MOUNTED TEMPERATURE TRANSMITTER Installation and assistance in testing & commissioning of Surface Mounted temperature elements/temperature transmitter (TT) by by welding the weld pad on the surface of the pipe, silicon paste as per the directions of engineer in-charge/site engineer and drawings. |
| 471 | INSTALLATION OF EMERGENCY SHUTDOWN SWITCH: Installation and testing of emergency shut - down (ESD) Push button. This includes mounting of termination box as per the drawings, specification and instruction of Engineer in-charge/ Site engineer, replacement of broken glass covers and painting it in red colour. |
| 472 | INSTALLATION OF JUNCTION BOX/ PUSH BUTTON STATION - for MOV/ROSOV: Installation of non-flame proof junction box, explosion proof / flame proof junction boxes, Push button stations for MOV/ROSOV for marshalling of control cables, terminating the cables at field and control panel end, mounting the junction boxes/Push button station, connecting to earthing grid by supplying and installing all the required materials such as supporting structure, canopy, cable gland hood, cement concrete, painting, GI wire etc. (excluding supply of the Junction Boxes/Push button station) in all respects complete as per specifications, drawings and direction of site Engineer including supply of suitable size non-flame proof cable glands at Control Panel end and the cost of labour,tools, materials, glanding, ferruling etc. complete in all respects. |
| 473 | INSTRUMENTATION JOBS FOR MOTOR OPERATED VALVES (MOV)/ROSOV/ROV - Carrying out the instrumentation and control system jobs on the already erected actuator assembly of motor operated valves (MOV)by making the necessary cable connection at field and control panel end (excluding the supply of cables) calibrating the control components, adjusting the limit switches, testing the whole assembly as per drawings specifications and direction of the engineer in-charge/site engineer complete in all respect, including supply of suitable size non-flame-proof cable glands, ferruls, drilling/cutting of plate for fixing glands at Control Panel end and the cost of all labour, tools, glanding, ferruling, consumables etc. |
| 474 | INSTALLATION OF CONTROL PANEL/CONSOLE DESK/ UPS/ RIO/ RTU/ PLC/ ACDB - Taking delivery, shifting the panels to installaion site and erection, installation, testing of Control panels, mounted with all the instruments, power supply units, UPS & battery banks logic control systems , barriers, providing assistance to control system vendor for commissioning of control system including panels, control/console desk etc. installation on already made foundations or fixing on walls, or steel structure or fixtures aligning, levelling, grouting, inter-wiring outgoing, incoming cable terminations as required, earthing, testing, complete in all respects as per drawings, specifications and directions of the engineer in-charge/site engineer, including supply of suitable size non-flame proof cable glands for all incoming/outgoing cables and the cost of the materials, tools, labour, glanding, ferruling etc. complete in all respects.The indicated quantity is cumulative weight of panels. |
| 475 | STEEL STRUCTURAL WORKS - Supply, fabrication, erection and installation of steel/GI structural works of any type and shape such as cable racks, trays, push button, control posts, ladders, lugs, chain link, fencing, angles, joints, channels, plates, flats, bars etc as required as per specifications, drawings, directions of site engineer/engineer in-charge, inlcuding cost of all labour, materials, tools, consumables etc complete in all respects. Job is inclusuve of taking delivery from owner's go down and shifting to site wherever required. |
| 476 | DISMATLING OF CONTROL PANEL / MIMIC PANEL/ CONSOLE DESK/UPS/RTU: Dismantling of Control panels / MIMIC panels/UPS/RTU etc, retrieving cards/ modules in good condition and storage as per direction of site engineer/EIC, retrieving cables from control panels in healthy condition, isolating the retreived cables, labelling, of the cables etc so as to complete the job in every respect as per directions of site engineer / EIC |
| 477 | Supply & installation of MAGNETIC PROXIMITY SWITCH with suitable junction box for termination of leads/cable for extending contact to control system for unauthorised entry of building / MOV fencing. |
| 478 | SAND SUPPLY & FILLING :Supplying and spreading of approved quality,fine, dry /river sand in cable trenches as per drawings, specifi- cations and directions of the Site Engineer, including the cost of all material, transport, load and lift charges, labour,tools etc. complete in all respects. |
| 479 | BRICK SOLING :Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable trenches for protection; as per drawings, specification and direction of the Site Engineer including the cost of all brick,sand and other materials,tools,labour, load and lift charges etc.complete in all respects. |
| 480 | MS CABLE MARKERSupply, erection and installation of MS cable markers, including excavation and installation of Markers, cement concrete grouting, back filling etc. required as per drawing, specifications and directions of Site Engineer/ Engineer-in-charge including cost of all labours, tools & tackles, materials etc. complete in all respects. |
| 481 | Chemical Earthing: Supply, installation, testing and commissioning of ACE (Artificial concept of earthing with chemical rod) Chemrod earthing electrode by digging earthing of 3.0 Meter depth & 150 mm diameter or higher by drilling/or any other method, placing ACE Chemrod Earthing Electrode, consisting Mild steel Galvanized pipe of size 2500 mm x 50 mm outer dia or higher size x 2 mm thick or above, Galvanized MS rod of size 2575 mmx 16 mm or higher size be welded with bottom. The epoxy insulator of not less than 100 mm length is to be filled in residual gap between pipe and rod. Highly conductive substances not less than 50 Kg are to be used for treatment of soil. Model NECO T-19 of Tosha make or equivalents of YK Trader / UniqueAssociates / Shriram make. Item includes the supply and installation of the CI/RCC cover in the earth pit, backfilling etc. and construction of chamber; complete including excavation, backfilling and supply of all materials required for making earth pit as per drawings, specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. complete in all respects. |
| 482 | Supply, installation, testing of Earthing system consisting of 3 earth pits of perforated GI pipes earthing electrodes and copper plate terminal block including construction of chamber using cement concrete with earthing pit cover and frame, supply of charcoal, salt etc including supply of interconnecting cables / strips including necessary welding etc complete as drawings, specifications and directions of the site engineer, including cost of tools, materials etc complete in all respects as per drawing The job shall also include testing of each earth pit and the entire earthing system on whole.Note: Earthing for field instruments shall be provided from Station earth grid covered in Electrical SOR.. |
| 483 | Supply, installation, testing of Earthing system consisting of 6 earth pits of perforated GI pipes earthing electrodes and copper plate terminal block including construction of chamber using cement concrete with earthing pit cover and frame, supply of charcoal, salt etc including supply of interconnecting cables / strips including necessary welding etc complete as drawings, specifications and directions of the site engineer, including cost of tools, materials etc complete in all respects as per drawing The job shall also include testing of each earth pit and the entire earthing system on whole.Note: Earthing for field instruments shall be provided from Station earth grid covered in Electrical SOR.. |
| 484 | GI CONDUITS - Supply, erection and installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (already made) on walls, concrete structures etc.; including the supply and installation of all the necessary pipe fittings such asbends, sockets, elbows, tees, etc. bending, threading, binding,clamping, providing spacers, plugs, packings, bushing etc. as required for laying of cables, in roads, station pipe crossings, building entry, cable rising up to the equipment etc. as per the drawings, specifications and directions of Site Engineer/ Engineer-in-charge, including the cost of all labour, tools & tackles, Materials etc. complete in all respects. |
| 485 | 25 mm |
| 486 | 37 mm |
| 487 | 50 mm |
| 488 | 100 mm |
| 489 | 150 mm |
| 490 | Supply, installation & fixing of perforated GI trays of width 150 mm, 300 mm, 450 mm &600 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectively with concentricstatic load as 70 Kg at the centre, with materials, labour, tools andtackles, consumables etc , as per drawings, specification anddirections of Site Engineer / Engineer-in-Charge |
| 491 | Supply, installation & fixing of prefabricated perforated Aluminium cable trays of width 150 mm, 300 mm, 450 mm & 600 mm as per siterequirement for laying of cables with standard rung spacings. Load forsupport span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectivelywith concentric static load as 70 Kg at the centre, with materials,labour, tools and tackles, consumables etc , as per drawings,specification and directions of Site Engineer / Engineer-in-Charge |
| 492 | EARTH STRIP / WIRE / ROPE / CABLESupply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the site 'Engineer, including the cost of all labour, tools, materials, etc. complete in all respect. |
| 493 | 25 mm X 3 mm Copper flat |
| 494 | 100/95 Sqmm Copper cable |
| 495 | GI Wire / GI Rope ( 8 SWG ) |
| 496 | Installation, laying of Cat 6 LAN Cables in 16 mm/ 25 mm/ 32 mm PVC conduits from network switch through ceiling/wall/trench and post-laying end to end testing of cables. The job includes supply, installation & fixing of Duplex (2 port) Face plate (Network I/O point) (white/ cream colour) for Local Area Network including RJ45 I/O, modular plate & switch box/ gang box for fixing the face plate & accessories, supply and installation of PVC Conduits, all required materials such as fixing clamps, screws, cable straps, tags etc. as required complete in all respects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, materials etc. |
| 497 | Foundation, laying and erection of 3 to 5 meter pole for installation of CCTV as per tender specifications including the cost of labor, material, tools, tackles and all civil works complete in all respect. |
| 498 | Foundation, laying and erection of 6 to 9 meter pole for installation of CCTV as per tender specifications including the cost of labor, material, tools, tackles and all civil works complete in all respect. |
| 499 | Telephone Instrument as per tender specifications |
| 500 | Digital Telephone Instrument as per tender specifications |
| 501 | Power cable 3 Core x 2.5 mm2 Armoured, Copper as per specifications |
| 502 | Armored Cat 6 UTP Networking Cable as per specifications |
| 503 | Hydrostatic testing, inspection of safety valve and refilling of high pressure CO2 cylinder through CCE approved party and charging up to required pressure including taking delivery of the cylinder from the station and returning the same inclusive of all labour material ,transporation and all the other incidental expenses. The cylinder is to be returned back to the station within two week from the date of receiving from the station. For 2 KG. CAPACITY CO2 extinguisher |
| 504 | Hydrostatic testing, inspection of safety valve and refilling of high pressure CO2 cylinder through CCE approved party and charging up to required pressure including taking delivery of the cylinder from the station and returning the same inclusive of all labour material ,transporation and all the other incidental expenses. The cylinder is to be returned back to the station within two week from the date of receiving from the station. For 6.8 KG. CAPACITY CO2 extinguisher |
| 505 | Maintenance/checking/ Refilling of Fire buckets with sand & canopy as per the direction and satisfaction of Site engg/ EIC. |
| 506 | Inspection, testing and maintenance of eye wash unit & safety shower,greasing of moving pointsand valve. Cleaning of platform and other required rectification work ioncluding , labour charges, tools &tackles, consumables complete in all respect as direction of EIC. |
| 507 | Refilling and instalaltion of CO2 gas in cartridges for using in DCP extinguishers including all labour, transportation etc. complete as per specification and direction of EIC/Site-Engineer. (CO2 CARTRIDGE OF 120/ 200g MS) |
| 508 | REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR 9 KG/10 KG DCP EXTINGUISHER Discharge hose with squeeze grip, hose should not burst or show leakage before 50 Kgf/cm2. |
| 509 | Carrying out maintenance and inspection of fire extinguishers on monthly basis including pastings/ marking of maintenance date, cleaning, condition of threads of caps, discharge tubes, sharpness of piercing pin and cylinder body, replacement of defective parts ( IOCL supplied), measuring weight and charges for labour, including oiling, greasing, testing as per direction of EIC inclusive of all tools &tackles, consumables, transportation, labour charges etc and measuring instruments for the same as directed by the EIC/ Site engineer and submitting the reports of the inspection as per HSE manual format (payment of spares not supplied by IOCL shall be made as per respective items) For 10/9 KG. CAPACITY DCP extinguisher |
| 510 | Carrying out maintenance and inspection of fire extinguishers on monthly basis including pastings/ marking of maintenance date, cleaning, condition of threads of caps, discharge tubes, sharpness of piercing pin and cylinder body, replacement of defective parts ( IOCL supplied), measuring weight and charges for labour, including oiling, greasing, testing as per direction of EIC inclusive of all tools &tackles, consumables, transportation, labour charges etc and measuring instruments for the same as directed by the EIC/ Site engineer and submitting the reports of the inspection as per HSE manual format (payment of spares not supplied by IOCL shall be made as per respective items) For 2 KG. CAPACITY CO2 extinguisher |
| 511 | Carrying out maintenance and inspection of fire extinguishers on monthly basis including pastings/ marking of maintenance date, cleaning, condition of threads of caps, discharge tubes, sharpness of piercing pin and cylinder body, replacement of defective parts ( IOCL supplied), measuring weight and charges for labour, including oiling, greasing, testing as per direction of EIC inclusive of all tools &tackles, consumables, transportation, labour charges etc and measuring instruments for the same as directed by the EIC/ Site engineer and submitting the reports of the inspection as per HSE manual format (payment of spares not supplied by IOCL shall be made as per respective items) For 4.5 KG. CAPACITY CO2 extinguisher |
| 512 | Carrying out maintenance and inspection of fire extinguishers on monthly basis including pastings/ marking of maintenance date, cleaning, condition of threads of caps, discharge tubes, sharpness of piercing pin and cylinder body, replacement of defective parts ( IOCL supplied), measuring weight and charges for labour, including oiling, greasing, testing as per direction of EIC inclusive of all tools &tackles, consumables, transportation, labour charges etc and measuring instruments for the same as directed by the EIC/ Site engineer and submitting the reports of the inspection as per HSE manual format (payment of spares not supplied by IOCL shall be made as per respective items) For 6.8 KG. CAPACITY CO2 extinguisher |
| 513 | Carrying out maintenance and inspection of fire extinguishers on monthly basis including pastings/ marking of maintenance date, cleaning, condition of threads of caps, discharge tubes, sharpness of piercing pin and cylinder body, replacement of defective parts ( IOCL supplied), measuring weight and charges for labour, including oiling, greasing, testing as per direction of EIC inclusive of all tools &tackles, consumables, transportation, labour charges etc and measuring instruments for the same as directed by the EIC/ Site engineer and submitting the reports of the inspection as per HSE manual format (payment of spares not supplied by IOCL shall be made as per respective items) For 2 KG CAPACITY Clean agent extinguisher |
| 514 | Hydrotest of DCP extinguishers, making empty out by pouring outside the cylinder, internal /external cleaning and repairing of various accessories such as cap assembly , discharge hose pipes, pressure gauge etc. by supplyling manpower gasket washer etc. Cylinder surface preparation / and application of one coat of red oxide primer and followed by two coat of synthetic enamel paints (fire red- Asian paint/ Berger/ Nerolac) (Hydrotest proceudre will be same as briefed in IS 2190: 2010 ) For 10/9/5 KG. CAPACITY DCP extinguisher |
| 515 | Hydrostatic testing, inspection of safety valve and refilling of high pressure CO2 cylinder through CCE approved party and charging up to required pressure including taking delivery of the cylinder from the station and returning the same inclusive of all labour material ,transporation and all the other incidental expenses. The cylinder is to be returned back to the station within two week from the date of receiving from the station. For 4.5 KG. CAPACITY CO2 extinguisher |
| 516 | REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR 9 KG/10 KG DCP EXTINGUISHER Safety clip (metal) with nylon thread |
| 517 | REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR 9 KG/10 KG DCP EXTINGUISHER DCP extinguisher cap washer |
| 518 | REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR 9 KG/10 KG DCP EXTINGUISHER Inner container |
| 519 | REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR FOR CO2 EXTINGUISHERS Handle for 2 Kg /4.5 Kg extinguisher |
| 520 | REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR FOR CO2 EXTINGUISHERS Safety pin with nylon string for CO2 extinguisher (For all sizes) |
| 521 | REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR FOR CO2 EXTINGUISHERS Supply & fitting plastic safety pin holder in CO2 extinguisher |
| 522 | Supply & fitting of clamps for hanging 2 / 4.5 Kg CO2 Fire Extinguishers on wall including labour charges, Tools & Tackles & consumables complete in all respect as per direction of EIC. |
| 523 | Supply and Fitting of new wind sock (fluoroscent in two colour), removing of old wind sock made out of synthetic cloth in flood light tower, buildings, upto height of 10 M, as per direction of site engineer / EIC. Approval to be granted for wind sock prior to supply. |
| 524 | Erection and supply of stand post of wind sock (up to height 15 mtr.) in place of damaged stand post as per specification of IOC and EIC including tools and tackles, labour chargesets complete in all respect. |
| 525 | Supply of first aid box with snake serum, First aid box medicines as per WB Factories rules and EIC on MRP. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
| 8 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
