|
| 1 | Extension of pipeline |
| 2 | 15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road |
| 3 | 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | 100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. |
| 5 | 100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock. |
| 6 | 100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals. |
| 7 | 100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes. |
| 8 | 100.12.6:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 50mm diameter nominal bore. |
| 9 | OD167425/2025-2026:Cost for cutting and welding 50 mm GI pipe 3 run welding including labour charges, cost of materials, etc |
| 10 | OD167426/2025-2026:Interconnecting the newly laid 50mm GI with 50 mm GI, including labour charges and cost of FTA |
| 11 | OD187930/2025-2026:Interconnecting the newly laid 90 mm pvc with 75 mm pvc , including labour charges ,etc as per the direction of department officers . |
| 12 | OD167427/2025-2026:Supply and fixing 50 mm GI end cap for 50mm GI pipes, including jointing etc.complete |
| 13 | OD170297/2025-2026:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -90 mm dia End cap |
| 14 | 100.32.1:Conveying and fixing C. I. Single Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 25mm Single Acting Air Valve. |
| 15 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | OD167945/2025-2026:Shifting water connection from the existing line to the newly laid line by supplying and fittingsuitable saddle clamp, PVC pipe, , MTA etc. |
| 17 | 100.98.1008:Engaging Coolie. |
| 18 | Cost of Materials |
| 19 | OD167423/2025-2026:Cost of 50mm GI pipe |
| 20 | 100.98.440:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm. |
| 21 | OD188797/2025-2026:Supply of GI union . |
| 22 | OD205886/2025-2026:Supply of GI Bend |
| 23 | 100.98.236:Supply of PVC Pipe, 10kg/cm2, 90mm Dia. Please Enable Macros to View BoQ information |
