|
| 1 | Hiring of 5 Nos. 60 HP sewage submersible pumps suitable for operation on 3-phase, 50 Hz AC power supply, including installation at site at depths up to 5 metres, complete with motor, starter, and capable of passing solids of minimum 100 mm size, along with all required accessories such as power cabling, control panels, connections, interconnections, etc., including complete installation, testing, commissioning and maintenance as required, and execution of the work in accordance with the directions of the Engineer-in-Charge. |
| 2 | Hiring of 250 kVA DG set without diesel, but including all other consumables such as lubricants, grease, mobil oil, etc., complete with making all necessary connections and interconnections, and including installation, testing, commissioning and maintenance as required, all in accordance with the directions of the Engineer-in-Charge. |
| 3 | Hiring of 150 kVA DG set without diesel, but including all other consumables such as lubricants, grease, mobil oil, etc., complete with making all necessary connections and interconnections, and including installation, testing, commissioning and maintenance as required, all in accordance with the directions of the Engineer-in-Charge. |
| 4 | Operation of three (03) sewage submersible pump sets by deployment of required manpower, including supply and handling of POL (diesel) for operation of DG sets. The scope includes cartage, safe storage, and filling of diesel in tanks, as well as all associated activities necessary for smooth and continuous operation, complete in all respects, as per site requirements and directions of the Engineer-in-Charge. |
| 5 | Operation of two (02) sewage submersible pump sets by deployment of required manpower, including supply and handling of POL (diesel) for operation of DG sets. The scope includes cartage, safe storage, and filling of diesel in tanks, as well as all associated activities necessary for smooth and continuous operation, complete in all respects, as per site requirements and directions of the Engineer-in-Charge. |
| 6 | Providing mild steel (MS) pipes up to 400 m length, fabricated/manufactured from MS plates of steel grade Fe-410 conforming to IS 3589:2001 (with latest amendments), or from HR coils of equivalent grade, on hiring basis. The pipes shall be coated with one coat of approved primer and finished with anti-corrosive bituminous paint, including proper surface preparation, complete in all respects, as per relevant IS specifications and as directed by the Engineer-in-Charge.Note: The pipes are to supplied on hiring basis. a) 300mm internal nominal dia., 6mm thick. |
| 7 | Providing mild steel (MS) pipes up to 1900 m length, fabricated/manufactured from MS plates of steel grade Fe-410 conforming to IS 3589:2001 (with latest amendments), or from HR coils of equivalent grade, on hiring basis. The pipes shall be coated with one coat of approved primer and finished with anti-corrosive bituminous paint, including proper surface preparation, complete in all respects, as per relevant IS specifications and as directed by the Engineer-in-Charge.Note: The pipes are to supplied on hiring basis. a) 500mm internal nominal dia., 6mm thick. |
| 8 | Laying and jointing of mild steel (MS) pipes of 300 mm diameter for lengths up to 400 m, in the required alignment, levels, and slope, including all necessary fittings and fixtures such as tees, bends, reducers, air valves, reflux (non-return) valves, and other appurtenances. The scope includes making connections at the outfall point, testing, and ensuring proper functioning of the pipeline system. The item also includes dismantling and removal of the MS pipeline after completion of the work, including handling and stacking, complete in all respects, as per site requirements and directions of the Engineer-in-Charge. |
| 9 | Laying and jointing of mild steel (MS) pipes of 500 mm diameter for lengths up to 1900 m, in the required alignment, levels, and slope, including all necessary fittings and fixtures such as tees, bends, reducers, air valves, reflux (non-return) valves, and other appurtenances. The scope includes making connections at the outfall point, testing, and ensuring proper functioning of the pipeline system. The item also includes dismantling and removal of the MS pipeline after completion of the work, including handling and stacking, complete in all respects, as per site requirements and directions of the Engineer-in-Charge. |
| 10 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.A) Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 11 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.A) Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 12 | Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge |
| 13 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 15 | Supplying cement bags filled with Jamuna sand, including filling, proper stitching of bag mouths, handling, transportation, stacking, and placing in position at site, complete in all respects, as per site requirements and directions of the Engineer-in-Charge. |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1%:3 (1 Cement: 1% coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 17 | Total = Rs.1,67,03,644.05 |
| 18 | GST Correction Factor @0.973 = Rs.1.62.52.645.66 |
| 19 | Add cost index @ 4.99 = Rs.6,54,981.62 |
| 20 | Note:- The total duration of the work shall be 150 days, which includes 30 days for setting up the pumping stations, installation of pipeline arrangements, and commissioning of the system from the date of award of work. This shall be followed by 90 days of operation and maintenance as per the directions of the Engineer-in-Charge. The final 30 days shall be utilized for dismantling the pumping stations and pipeline arrangements, and for restoring the dismantled road and site to its original condition. Please Enable Macros to View BoQ information |
