|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frame), area not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 3 | Taking down shutter of any description, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed. |
| 4 | S&F powder coated (of approved colour) aluminium sections as in frame & shutter of doors/window, partitions as in sliding/ openable/ louvers/ fixed type with and including necessary rolling for smooth moving & locking arrangement etc, fixed to wall including preparation of disturbed portion both side (internal & external surfaces of wall) to match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face), complete all as specified and directed. |
| 5 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening as per requirement and direction of Engineer-in-Charge. |
| 6 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed. |
| 7 | S&F 5mm thick tinted/ transprent sheet glass, ordinary quality and glazing with any type of beading /oil putty in any size of pane, complete all as specified and directed. |
| 8 | S&F 5mm thick figured glass pin head type ordinary quality and size, in any type of frame and glazing with oil putty or beading in square exc 0.50 Sqm in each panes, complete all as specified and directed. |
| 9 | S&F in repair of 18mm thick prelaminated medium density fibre (MDF) boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in cup board, shelves, kitchen cabinet etc, complete all as specified and directed. |
| 10 | S&F factory made solid PVC door frame of size 50mm x 47mm, made out of 5mm thick wall nut colour PVC sheet reinforced with MS Square tube, complete all as specified and directed. |
| 11 | S&F factory made solid PVC moulded door shutter of wall nut colour, 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 12 | S&F 35mm thick factory made flush shutters, solid core construction with block board core and plywood face panel, commercial plywood on both sides, complete all as specified and directed. |
| 13 | S&F 35mm thick 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauge etc. for door edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc. complete as per Clause 8.24 (a) of SSR Part-I (2009), complete all as specified and directed. |
| 14 | S&F 100mm long stainless steel butt hinges, medium weight and fixed with SS screws, complete all as specified and directed. |
| 15 | S&F 150mm long aluminium handles, cast type, anodised and fixed with SS screws, complete all as specified and directed. |
| 16 | S&F 150mm long aluminium anodised barrel towel bolts of extruded section and fixed with SS screws, complete all as specified and directed. |
| 17 | S&F 125mm long aluminium anodised barrel towel bolts of extruded section and fixed with SS screws, complete all as specified and directed. |
| 18 | S&F aluminium alloy sliding door bolt 250mm long with hasp & staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 19 | S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed. |
| 20 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 21 | S&F in replacement of looking mirror of size 600mm x 450mm, fancy type, made of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 22 | S&F in replacement of door closer of aluminium die cast body, hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000mm in width and of weight between 61 to 80 KG, complete all as specified and directed. |
| 23 | Demolition of stone slabs and tiles, laid dry or dry beded or pointed of any description or thickness as in floors, aprons etc, complete all as specified and directed. |
| 24 | M&L for granite 16-18mm of 'Z' Black grade (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like one piece full in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 25 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed. |
| 26 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:4, complete all as specified and directed. |
| 27 | Taking down cement or cement lime plaster on brick or stone walls etc. upto 4 storey buildings of any description including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 28 | M&L for rendering 15mm thick in two layers (10mm + 5mm) in CM 1:4 on fair faces of brick work or concrete surfaces with WPC, finished the surface even and smooth w/o using extra cement, complete all as specified and directed. |
| 29 | M&L for rendering 10mm thick in cement mortar 1:6 on fair face of brick work or concrete surfaces, finished the surface even and smooth w/o using extra cement, complete all as specified and directed. |
| 30 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 31 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles, laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed. |
| 32 | M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 6 to 7mm thick each, sharp edged in vertical surfaces such as walls, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles, fixed over and including 10mm thick plaster in CM 1:4, complete all as specified and directed. |
| 33 | M&L for 10mm thick vitrified coloured ceramic tiles (double charged), square, polished, light shade, area of each tile not exc 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles, laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed. |
| 34 | S&F in replacement of glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed. |
| 35 | S&F in replacement of corner glass self (with CP brakets), complete all as specified and directed. |
| 36 | Dismantling of water tank of 1000 ltrs capacity and removing to store, complete all as specified and directed. |
| 37 | Dismantling of water tank of 500 ltrs capacity and removing to store, complete all as specified and directed. |
| 38 | S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of 1000 litres capacity (tripple layer) white in colour including water tank cover (internaly interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes, complete all as specified and directed. |
| 39 | S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of 500 litres capacity (tripple layer) white in colour including water tank cover (internaly interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes, complete all as specified and directed. |
| 40 | Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 41 | Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 42 | M&L for 15mm bore medium grade galvanised water tubes with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed. |
| 43 | M&L for 20mm bore medium grade galvanised water tubes with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed. |
| 44 | S&F in replacement of 16mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 including all necessary fittings, fixed to wall or laid in trenches, complete all as specified and directed. |
| 45 | S&F in replacement of 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 including all necessary fittings, fixed to wall or laid in trenches, complete all as specified and directed. |
| 46 | S&F CPVC pipe of 25mm bore SDR 11 (Class 1) conforming to IS for overflow line for 500/1000 ltrs storage tank including all fitting and fixtures, fixed to wall and floor with necessary clamps and one step CPVC solvent including testing of joints, complete all as specified and directed. |
| 47 | Dismantling of wrought iron or mild steel work of any description, complete all as specified and directed. |
| 48 | M&L for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe-410W (Gde-E-250 quality A), complete all as specified and directed. |
| 49 | Dismantling of asbestos cement (corrugated or semi corrugated etc.) sheets as in roof covering including ridges, complete all as specified and directed. |
| 50 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 51 | S&F 0.50mm thick prepainted glavalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 52 | M&L for complete removing existing treatment on walls surfaces by scraping down smoke soot, moulds moss, efflorences salts and trading oil & greasy spots and applying two coats of distemper oil emulsion white or tinted over one coat of 2mm thick wall care putty and a coat of alkali resistance primer, complete all as specified and directed. |
| 53 | M&L for preparation of new plastered surfaces by using necessary filling compound of Altek/Birla white putty to obtain smooth and even finish with using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint, complete all as specified and directed. |
| 54 | M&L for preparation of old plastered or un-plastered surface by brooming down or steel wire brushing, scraping down smoke soot, moulds moss and filling nails marks with wall putty and applying one coat of OBD white or tinted, complete all as specified and directed. |
| 55 | M&L for preparation of plastered or un-plastered old decorative surfaces and washing down, brooming down or steel wire brushing etc and applying one coat of cement base paint on walls, complete all as specified and directed. |
| 56 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant cement base primer, complete all as specified and directed. |
| 57 | M&L for complete removing of existing treatment upto 4 storey bldg including scraping, removing all mud, cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/Birla white putty exterior grade to obtain smooth/even finish with using sand paper and applying two coats of first quality exterior grade wheather proofing acrylic emulsion paint as per manufacturer's instructions of any shade and colour over a coat of alkali resistant cement based priming paint, complete all as specified and directed. |
| 58 | M&L for preparation of old wooden painted surface not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint white or tinted, complete all as specified and directed. |
| 59 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 60 | M&L for preparation of old painted steel and iron surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 61 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets, complete all as specified and directed. |
| 62 | S&F powder coated GI frame grid of size 600mm x 600mm for false ceiling including non asbestos fibre cement building boards of 4mm thick and size 595x595mm, fixed or laid/ inserted to timber/ GI/ Aluminium frame work with screws and including butterfly clip, complete all as specified and directed. |
| 63 | Providing and fixing designer false ceiling at all heights using 12.5mm thick tapered edge gypsum board conforming to IS:2095 (Part I), fixed with screws including GI metal framework comprising of perimeter channels (0.55mm thick), intermediate channels (0.9mm thick) spaced at 450mm centre to centre, ceiling sections and hangers suspended from RCC slab/ roof by GI cleats, dash fasteners and connecting clips, including making cut outs for light fixtures, AC grills, providing necessary perimeter channels, jointing with paper tape and jointing compound, finishing with two coats of acrylic emulsion paint over primer & putty, complete all as specified and directed. |
| 64 | S&F hollow PVC wall paneling consisting of 5-6mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site as per specifications and drawing, complete all as specified and directed. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
