Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed. |
| 2 | Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, poles, laying of pipes, laying of cable etc. or for shafts, wells, cesspits, manholes, pier holes etc, not exc 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in any type of soil, complete all as specified and directed. |
| 3 | Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50 mtr and making good surface in soft / loose soil, complete all as specified and directed. |
| 4 | Returning, filling in including spreading, levelling and well ramming in layers not exc 25cm in thick each, complete all as specified and directed. |
| 5 | Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 6 | M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick including watering and ramming to a true surface, complete all as specified and directed. |
| 7 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed. |
| 8 | M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed. |
| 9 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors, sub base of floor etc, finished the surface even abd smooth without using extra cement, complete all as specified and directed. |
| 10 | M&L for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floors, sub base of floor etc, finished the surface even abd smooth without using extra cement, complete all as specified and directed. |
| 11 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floors, levelling course etc, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M&L for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in slope in 1:3 in pannels not exc 2 mtr long, finished the surface even and smooth without using extra cement including making jioints, complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises, complete all as specified and directed. |
| 14 | M&L for 7-8mm thick non skid coloured ceramic tiles (square/ ractangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 15 | M&L for 7-8mm thick non skid coloured ceramic tiles (square/ ractangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 16 | M&L for glazed ceramic coloured tiles, size 450x300x7mm / 350x250x7mm / 450x350x7mm as on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.Note:- Size of tile shall be decided by EIC. |
| 17 | M&L for 10mm thick virified light shade ceramic tiles (square / rectangular), polished, area of each tiles not exceeding 0.36 Sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid/ fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 18 | M&L for 10mm thick virified light shade ceramic tiles (square / rectangular), polished, area of each tiles not exceeding 0.36 Sqm, as in dados/ skirtings etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, fixed over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 19 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 20 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & ottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with uitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 21 | S&F 100mm size cadmium plated stainless steel butt hinges, fixed with stainless steel screws, complete all as specified and directed. |
| 22 | S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 23 | S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 24 | S&F 150mm long aluminium handles, cast type, anodised, oval shape, complete all as specified and directed. |
| 25 | Demolition of brick work or stone boulder masonery, built in cement mortor including all quoins arches pillars etc, complete all as specified and directed. |
| 26 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in CM 1:6, complete all as specified and directed. |
| 27 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in CM 1:4, complete all as specified and directed. |
| 28 | All as per serial item No. 27.00 here-in-above but except bricks. |
| 29 | M&L for brick work with subclass 'B' old size burnt bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed. |
| 30 | Taking down cement plaster of any description on bricks, PCC block or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 31 | M&L for rendering 10 mm thick cement plaster on fair face of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed. |
| 32 | M&L for 15mm thick rendering on fair faces or brick / concrete surfaces in cement mortar 1:4 with using water proofing compund and finishes even and smooth without using extra cement, complete all as specified and directed.Note: WPC shall be measured and paid seperately. |
| 33 | M&L for 5mm thick rendering in cement mortar 1:4 on ceiling, finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 34 | Supply only integeral water proofing compound. |
| 35 | M&L for preparation new decorated surfaces of walls surfaces and applying two coats of cement base paint over one coat of wall care putty over one coat of cement primer, complete all as per specified and directed. |
| 36 | M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2-3mm thick wall care putty and wall primer, complete all as specified and directed. |
| 37 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 38 | Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store, laid on floor or wall, complete all as specified and directed. |
| 39 | Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store, laid on floor or wall, complete all as specified and directed. |
| 40 | S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 41 | S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 42 | M&L for 3 layer rotational moulded polyethylene water storage tanks any colour 1000 ltr Capacity (Cylindrical vertical with closed top), hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part I complete all as specified and directed. |
| 43 | S&F pillar tap, cast copper alloy with capstan head, fancy type, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipes of bore 15mm, complete all as specified and directed. |
| 44 | S&F 15mm dia bib tap, chormium plated with crutch or butterfly handles, screwed down, screwed for iron pipes or for brass ferrule, long body, complete all as specified and directed. |
| 45 | S&F in replacement bip tap of 15mm bore standard of PTMT of any colour, screwed for iron pipe & fixed (min. weight 15mm - 90gms), complete all as specified and directed. |
| 46 | S&F 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 47 | S&F stop valve chromium plated, brass, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed for 15mm bore iron pipe or for union, complete all as specified and directed. |
| 48 | S&F angle cock, chromium plated, cast copper alloy, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed. |
| 49 | S&F angle/stop valve of PTMT of any colour, high pressure, screwed for 15mm bore iron pipe and fixed (Minimum weight 15mm-90gms), complete all as specified and directed. |
| 50 | Dismantling asbestos cement / CGI / PGI (corrugated or semi corrugated etc) sheet in roof covering including ridges, complete all as per specified and directed. |
| 51 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 52 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed self tapping screws, complete all as specified and directed. |
| 53 | M&L for rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates, conforming to Fe-410-W grade E-250 quality A, complete all as specified and directed. |
| 54 | M&L for preparation of new steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 55 | M&L for preparation of old steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 56 | S&F wash basin, vitreous china (flat back or angle type), size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling of 32mm dia and PVC waste pipe of 32mm dia, complete all as specified and directed. |
| 57 | S&F centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed. |
| 58 | S&F brass CP mixer for mixing hot & cold water, screwed down for 15mm bore iron pipe, complete all as specified and directed. |
| 59 | S&F 100/105mm size CP shower rose with arm 15mm dia, 195mm long with bend of 45 degree with wall flange, complete all as specified and directed. |
| 60 | S&F powder coated (minimum thickness of powder coating 50 micon) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 61 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved, make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 62 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including thecost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make, conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 63 | S&F 5.5mm thick sheet glass, sheet glass is grounded obscured or frosted on one side ordinary quality and fixed with aluminium and rubber beading in square exc 0.50 Sqm each,complete all as specified and directed. |
| 64 | S&F vitreous china urinals, pedestal type, half stall (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flushing cistern with brackets, flush pipe, grating and union for discharge pipe including flush pipe, waste pipe and urinal spreader), complete all as specified and directed. |
| 65 | S&F wash down water closet (Pedestal pattern), complete with pedestal pan and 'P' trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. including aluminium hinging device, complete all as specified and directed. |
| 66 | S&F plastic water closet seat, closet pattern with flat bottom and cover incudingl mild steel chromium plated or aluminum hinges device, complete all as specified and directed. |
| 67 | S&F PVC low level flushing cistern of capacity 10 ltrs, white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipe, complete all as specified and directed. |
| 68 | S&F 75mm dia sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 69 | S&F 75mm bore sand cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with oval access door, complete all as specified and directed. |
| 70 | S&F PVC connection of 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed. |
| 71 | S&F PVC connection of 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed. |
| 72 | S&F decorative soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, complete all as specified and directed. |
| 73 | S&F chromium plated towel ring of 20mm dia, fixed with and including chromium plated brass screws and wooden/ plastic cleats, complete all as specified and directed. |
| 74 | S&F solid PVC wall lining consisting of 5mm thick wood grain PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed. |
| 75 | S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheetinclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed. |
| 76 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 77 | M&L for mild steel TMT bars 5mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 78 | Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 79 | M&L for RCC 1:2:4 (Nominal Mix) type B-1 (using 20mm graded crushed stone aggregates) as in column pillar etc, complete all as specified and directed. |
| 80 | Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required, complete all as specified and directed. |
| 81 | M&L for 150mm bore salt-glazed stoneware drain pipes laid in trenches and jointed, complete all as specified and directed. |
| 82 | M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, laid in trenches, complete all as specified and directed. |
| 83 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes of 150mm bore after they are laid and tested, complete all as specified and directed. |
| 84 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and directed.Note :- Inner girth shall only be measured. |
| 85 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 86 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples, complete all as specified and directed. |
| 87 | M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of pink primer, complete all as specified and directed. |
| 88 | Surface dressing not exc 15cm deep in any type of soil, complete all as specified and directed. |
| 89 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors, sub base of floor etc, finished the surface even abd smooth without using extra cement, complete all as specified and directed. |
| 90 | Providing and fixing 4mm thick designer cement fibre ceiling board in ceiling fixed with screws as per manufactures instructions, laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be under coated white. The frame shall comprise of main runner made from 0.33mmm thick galvanized steel sheet & size of 24 x 32x and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. hangers of Gl wire 4mm dia to be fixed by the approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm centre to from 1200 x 600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wil angle shall be of 0.45mm thick galvanized steel of size 19 x 19mm and 300mm long of white colour all as per instruction, complete all as specified and directed. |
| 91 | M&L for machine pressed rubber moulded, manufactured / compacted by vibrating table method precast concrete interlocking coloured paver block, glossy finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments, complete all as specified and directed. |
| 92 | M&L for machine pressed rubber moulded, manufactured / compacted by vibrating table method precast concrete interlocking coloured paver block, glossy finish, any shape and size, confirming to IS:15658-2006 of 80mm thickness, M-40 grade with grey cement and pigments, complete all as specified and directed. |
| 93 | M&L for sand filling under floors, paver blocks or in foundations including watering, ramming and consolidation, complete all as specified and directed. |
| 94 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in foundations including rafts, footings, foundation beams, plinth beams and mass concrete etc, complete all as specified and directed. |
| 95 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in columns, pillars, piers, post and struts, complete all as specified and directed. |
| 96 | Use and waste of formwork to sides of concrete foundations, footings, base of columns, sides anc soffits of plinth beams, sides of pile caps and similar work for rough finished surface of concrete, complete all as specified and directed. |
| 97 | Use and waste of formwork to sides of column, pillars etc for rough finished concrete surface, complete all as specified and directed. |
| 98 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in lintels, beams and roof beams etc, complete all as specified and directed. |
| 99 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc fair finished surface of concrete, complete all as specified and directed. |
| 100 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like, complete all as specified and directed. |
| 101 | Forming square grooves in plaster not exc. 12mm deep and not exc. 15mm on face of internal and external surfaces, complete all as specified and directed. |
| 102 | S&F gun-metal, globe or gate valves with iron wheel head, screwed both ends for 20mm bore iron pipe, complete all as specified and directed. |
| 103 | S&F fancy type looking mirror of size 600mm x 450mm x 6mm thick with bevelled edge, made of 6mm thick selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 104 | S&F health faucet CP brass with 8mm dia, 1 mtr long flexible tube with wall hook, complete all as specified and directed. |
| 105 | S&F in replacement of health faucet, brass, chromium plated with 1250mm long 15mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed. |
| 106 | S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 107 | S&F CP brass grating 100mm dia with centre hole, complete all as specified and directed. |
| 108 | S&F toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screws, complete all as specified and directed. |
| 109 | M&L for factory made (box type) mild steel widow/ ventelators glazed and gauged combined shutter with side hung including box type hinges steel peg stay locking arrangement with glazing and gazing bar dovetailed or welded and one shop coat of red oxide primer& two coats of synthetic enamel paint, complete all as specifiedand directed with the followings:-NOTES:- (a) The window /ventelator shall be fabricated as per drg No CEUZ/TD/1302/2009 sheet 1/3 to 3/3.(b) MS fillets,glazing,wire gauges shall be measured and paid for seperately.(c) One side out to out dimensions shall be measured for payment of combined window (glazed & gauged). |
| 110 | S&F 4mm thick plain/ pin headed/ frosted sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 111 | S&F in repairs 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 112 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 113 | S&F towel rod CP brass 20mm bore and 600mm long, fixed with brass screw and plug, complete all as specifed and directed. |
| 114 | S&F 110mm bore PVC (SWR) pipe, single socket in any length with rubber ring joints, laid in floor or trenches, complete all as specified and directed. |
| 115 | S&F 75mm bore PVC (SWR) pipe, single socket in any length with rubber ring joints, laid in floor or trenches, complete all as specified and directed. |
| 116 | S&F 75mm bore PVC (SWR) pipe, single socket in any length with rubber ring joints, fixed to wall with and including MS clamps of suitable size, complete all as specified and directed. |
| 117 | S&F PVC (SWR) bends of any radius and provided with access door, suitable for 75mm bore pipe, complete all as specified and directed. |
| 118 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 119 | S&F PVC (SWR) multi floor trap with grating to 75mm dia including jointing to waste pipe with solvent cement, complete all as specified and directed. |
| 120 | M&L for PVC (SWR) gully trap 110/ 125mm size, setting and jointing with solvent cement, complete all as specified and directed. |
| 121 | S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 122 | S&F 110mm bore PVC (SWR) junction single (single T) equal or unequal provided with access door, complete all as specified and directed. |
| 123 | M&Lfor HDPE DWC (double wall corrugated) pipes confirming to IS-16098 of 150mm internal dia, pressure rating SN-8, fixed with rubber seal and coupler required with and including suitable bends 90/60/45 degree etc singleY junction, complete as required, fixed as per manufacturer's instruction, laid in trenches for sewage lines, complete all as specified and directed.Note:- Rates shall be included for taking out old sewage pipe of any type and dia, Y Jn coupler /adaptor etc required and net total length of pipe with fittings shall be measured for payment purpose. |
| 124 | M&L for precast RCC cover in cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in slab (for manholes etc) with plain faces including setting in CM 1:4, complete all as specified and directed. |
| 125 | Dismantling of wrought iron or mild steel work of any decription not otherwise provided for, complete all as specified and directed. |
| 126 | Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. |
| 127 | Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. |
| 128 | Factory made pressed steel frame, steel window / vent with glazed and gauged shutter (combined with side hung shutters incl box type hinges, steel handle necessary locking arrangement, peg stays complete with one shop coat of zinc chrome primer including PCC 1:3:6 Type C-0 filling in back side recess profile portion, complete all as specified and directed.Note:- Rate quoted shall be deemed include for wire gauged shutters and glazed window shutters complete & shall be measured as overall out to out one side only. |
| 129 | S&F factory made steel window (box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc. incl one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings. |
| 130 | M&L for pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete all as specified and directed. |
| 131 | M&L for factory made, 2nd class hard wood rail and style 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 132 | M&L for mild steel work as in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc & similar work, confirming to FE-290 Gde E-165, complete all as specified and directed. |
| 133 | M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10cm girth on brick wall, complete all as specified and directed. |
| 134 | S&F in replacement of 32mm bore waste pipe, suitable for WHB/Sink, complete all as specified and directed. |
| 135 | S&F flush pipe with rubber washer PVC of dia 32mm for low level cistern pipe, complete all as specified and directed. |
| 136 | S&F in replacement of 32mm bore CP brass waste coupling suitable for WHB, complete all as specified and directed. |
| 137 | M&L for RCC NP3 of 200mm diameter pipes, laid on and including 150mm thick cradle PCC 1:4:8 type D-2 bed with excavation in any type of soil including manholes/ drop manhole of standard size made of brick masonry / RCC / Precast RCC with SFRC ventilating cover and frame including all items and activities to execute and make sewer line functional, complete all as specified and directed. |
| 138 | M&L for on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 type D-2 below foundation, vent shaft, connection etc. complete for 5 Users with upflow filter including media, complete all as specified and as per manufacturer's instructions and as directed by Engineer-in-Charge. |
| 139 | M&L for on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 type D-2 below foundation, vent shaft, connection etc. complete for 30 Users with upflow filter including media, complete all as specified and as per manufacturer's instructions and as directed by Engineer-in-Charge. |
| 140 | M&L for soakage well, excavation in any type of soil, foundation in PCC 1:3:6, walls of honeycombed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipes of RCC/ DWCcomplete filled with brick bats of size 1.2 mtr x 1.5 mtr effective depth, complete all as specified and as per drawing and as directed by Engineer-in-Charge. |
| 141 | M&L for soakage well, excavation in any type of soil, foundation in PCC 1:3:6, walls of honeycombed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipes of RCC/ DWCcomplete filled with brick bats of size 2.40 mtr x 3.0 mtr effective depth, complete all as specified and as per drawing and as directed by Engineer-in-Charge. |
| 142 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets, complete all as specified and directed. |
| 143 | S&F 6mm thick non asbestos fibre cement building boards, fixed or laid or inserted to timber/ GI/ aluminium framework, complete all as specified and directed. |
| 144 | S&F anodised aluminium snap grid frame work for false ceiling, complete all as specified and directed. |
| 145 | S&F 4mm thick non asbestos fibre cement boards, size of each panel 605mm x 605mm, designed ceiling, conforming to IS-14862 type 'B' category three including snapgrid frame work, hold fast, suspenders, complete all as specified and directed. |
| 146 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, size 140mm, complete all as specified and directed. |
| 147 | S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed. |
| 148 | S&F in replacement of MS helical door spring, 300mm size including roller and roller plate, fixed to wooden or steel frames with welding/ fitted with screws etc, complete all as specified and directed. |
| 149 | Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in kerb stones and similar works bedded and jointed in CM 1:6, complete all as specified and directed. |
| 150 | M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS:1161-1979 grade ST-240, complete all as specified and directed. |
| 151 | M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in coping, kneelers, bonders and the like with plain fair faces including necessary formwork and weathering, slightly rounded or chemfered angles and throating, complete all as specified and directed. |
| 152 | Taking down carefully existing surface / concealed unserviceable aluminum/ copper point wiring (light, fan, socket, power or sunken box) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets, bracket holder, boards light fittings etc. and making good to disturbed surfaces of walls, floors, ceilings etc. where required and finished the existing surfaces after complete of new point wiring, complete all as specified and directed. |
| 153 | Dismantling and taking down fluorescent tube light, single / double of any wattage or size fittings for repair or replacement of burnt / worn out accessories or carrying to MES store for reuse or taking in schedule of credit, complete all as specified and directed. |
| 154 | Taking down unserviceable/ serviciable MCB DB's / AC box including MCBs taking in schedule of credit of any size/rating, complete all as specified and directed. |
| 155 | M&L for point wiring with multi stranded copper condutor 1.5 Sqmm nominal cross section area,single core,PVC insulated and unsheathed FRLS cable 1100V grade,in and including medium grade, PVC concealed conduit ISI marked of dia not less than 25mm and conduilt accessories concealed in wall/roof/floor etc with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc for Modular, suitable for mounting modular type switches, sockets fan regulators etc PVC insulated Pmultistranded copper condutor 1.5 sqmm nomina cross section area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully, complete all as specified and directed with the followings :- One light point / light point ceiling fan / exhaust fan, controlled by one SP switch. |
| 156 | All as per serial item No. 155.00 here-in-above but 3 Pin 5 Amp Socket on independent board. |
| 157 | M&L for point wiring for one 5 pin modular socket outlet two 16/6 amps with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multistranded copper conductor of size 2.5 Sqmm drawn through in and including PVC conduit size of not less than 25mm dia, concecled in wall / surface including sutiable new annealed sunken boxes, modular frame and cover plate for fixing of modular switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm including making good disturbed surface to match with existing surface, complete all as specified and directed. |
| 158 | S&Fmetal clad plug socket, single pole enclosure with two pin earth plug and socket with one single 16-32 Amps, 240 volts MCB, complete all as specified and directed. |
| 159 | S&F modular switch one module, 5/6 Amp, one way, 230 volts AC, complete all as specified and directed. |
| 160 | S&F modular socket 6 amps 5 pin flush type, 240 volts with polycarbonate body, complete all as specified and directed. |
| 161 | S&F modular socket outlet 5 pin 6 & 15 amps, multipurpose 2 in 1, flush type, 230 volts with polycarbonate body, complete all as specified and directed. |
| 162 | S&F modular switch single pole one way 16 Amps, 240 volts with polycarbonate body, complete all as specified and directed. |
| 163 | S&F ceiling rose, 3 phase, PVC / polycarbonate, surface type, 65mm x 50mm, insulated body, three terminal, complete all as specified and directed. |
| 164 | S&F LED Light fitting 20 watt High-quality materials and design. Extruded aluminium housing enhances safety with High quality PC Diffusers Reliable and robust housing structure, maximize the endurance over the life time slim Integrated design easy to install Efficacy: 110 Im/W and also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling, complete all as specified and directed. |
| 165 | S&F round shape 15 Watt, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 166 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., complete all as specified and directed. |
| 167 | S&F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SPN DB system 8 Ways, complete all as specified and directed. |
| 168 | S&F MCB SP, 5 to 32 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed. |
| 169 | S&F MCB SPN 32 to 63 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed. |
| 170 | M&L for sub main wiring with copper conductor cable two runs of multistaranded 4.0 Sqmm FRLS PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including cutting, chasing and 1 x 4.0 Sqmm copper conductor cable FRLS PVC insulated unsheathed multithreaded usinc as continues earth wire, connected to common earth and earth duly, complete all as specified and directed. |
| 171 | M&L for sub main wiring with copper conductor cable two runs of multistaranded 6.0 Sqmm FRLS PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including cutting, chasing and 1 x 6.0 Sqmm copper conductor cable FRLS PVC insulated unsheathed multithreaded usinc as continues earth wire, connected to common earth and earth duly, complete all as specified and directed. |
| 172 | S&F 35 Watt LED building security light fitting with ASTRA NEC building security lights are made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection and with 0.6 mtr long 20/25 mm (as per manufacturer standard) dia GI Pipe in 45 degree bend shape and necessary clamping devices required at site, complete all as specified and directed. |
| 173 | Supply, laying and testing XLPE cable insulated, screened, PVC bedded galvanised stee strip or wire armounded electric power cables (heavy duty) 1100 Volts conductor of size 16 Sqmm 2 Core, complete all as specified and directed. |
| 174 | Supply, laying and testing XLPE cable insulated, screened, PVC bedded galvanised stee strip or wire armounded electric power cables (heavy duty) 1100 Volts conductor of size 10 Sqmm 2 Core, complete all as specified and directed. |
| 175 | M&L for dry sand cushioning to under ground cables provided with a layer of sand 8cm thick before laying the cable and 15cm thick after laying cable & stretching the cable, complete all as specified and directed. |
| 176 | Supply and laying brick, class B, old size, covering as mechanical protection to cable with wel burnt, complete all as specified and directed. |
| 177 | Supply and laying 40mm bore GI pipe light grade with all fittings required for protection of under ground cable including cutting of road surface wherever required and making good to match with existing surface, complete all as specified and directed. |
| 178 | S&F exhaust fan steel body, AC, single phase 230 volts of size 300mm sweep with blades and frame and louver, complete all as specified and directed.Note: Old u/s exhaust fan of any size and type needs to be deposite to MES store yard being old vintage so that BER case may be initiated as per policy in vogue. |
| 179 | M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground evel) with top edge of the plate not less than 1.5 mtr below normal ground leve connected to earth lead wire of Gl wire 4mm dia by means of nuts/bolts and washers check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work charcoal dust, commor salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 5 of SSR Part-l connected to ear thing test point all as specified or indicatec including testing on completion, complete all as specified and directed. |
| 180 | S&F ceiling fan complete with blades, down rods electronic regulators and accessories 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush less direct current motor (BLDC), complete all as specified and directed.Note : Old u/s exhaust fan of any size and type needs to be deposite to MES store yard being old vintage so that BER case may be initiated as per policy in vogue. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
