|
| 1 | First Year Rate Contract for Machining |
| 2 | Prep of Coupling Bore, Bore size <2\\" |
| 3 | Prep of Coupling Bore, 2\\">Bore size <4\\" |
| 4 | Prep of Coupling Bore, 4\\">Bore size <8\\" |
| 5 | Prep of Coupling Bore, 8\\">Bore size <12\\" |
| 6 | Prepof Flange, ID<2\\" |
| 7 | Prep of Flange,2> ID<4\\" |
| 8 | Prep of Flange,4> ID<6\\" |
| 9 | Prep of Flange,6> ID<10\\" |
| 10 | Checking run out of shaft |
| 11 | Check and Rect of run out of Shaft |
| 12 | Machining of ID Bearing Housing ID<4\\" |
| 13 | Machining of ID Bearing Housing ID<8\\" |
| 14 | Machining of ID Bearing Housing ID<12\\" |
| 15 | Stud Prepartion, dia<1\\", lengh<2\\" |
| 16 | Stud Prepartion, dia<1\\", lengh<4\\" |
| 17 | Stud Prepartion, dia<1\\", lengh<8\\" |
| 18 | Stud Prepartion, dia<1\\", lengh<12\\" |
| 19 | Stud Prepartion, 1\\" |
| 20 | Stud Prepartion, 1\\" |
| 21 | Stud Prepartion, 1\\" |
| 22 | Stud Prepartion, 1\\" |
| 23 | General Turning operation per hr. |
| 24 | General Drilling operation per hr. |
| 25 | General Boring operation per hr. |
| 26 | General Tapping operation per hr. |
| 27 | General Miller operation per hr. |
| 28 | General Shaper operation per hr. |
| 29 | General Threading operation per hr. |
| 30 | Prep of Nipple, dia<1/2\\", Length<4\\" |
| 31 | Prep of Nipple, dia<1\\", Length<6\\" |
| 32 | Prepartion of Key, size<1/2\\" x 1/2\\" |
| 33 | Prepartion of Key, size<1\\" x 1\\" |
| 34 | Prepartion of Key, size<2\\" x 2\\" |
| 35 | Stem Nut preparation, ID <1\\" |
| 36 | Stem Nut preparation, 1\\">ID <2\\" |
| 37 | Stem Nut preparation, 2\\">ID <4\\" |
| 38 | Stem Nut preparation, 4\\">ID <8\\" |
| 39 | Second Year Rate Contract for Machining |
| 40 | Prep of Coupling Bore, Bore size <2\\" |
| 41 | Prep of Coupling Bore, 2\\">Bore size <4\\" |
| 42 | Prep of Coupling Bore, 4\\">Bore size <8\\" |
| 43 | Prep of Coupling Bore, 8\\">Bore size <12\\" |
| 44 | Prepof Flange, ID<2\\" |
| 45 | Prep of Flange,2> ID<4\\" |
| 46 | Prep of Flange,4> ID<6\\" |
| 47 | Prep of Flange,6> ID<10\\" |
| 48 | Checking run out of shaft |
| 49 | Check and Rect of run out of Shaft |
| 50 | Machining of ID Bearing Housing ID<4\\" |
| 51 | Machining of ID Bearing Housing ID<8\\" |
| 52 | Machining of ID Bearing Housing ID<12\\" |
| 53 | Stud Prepartion, dia<1\\", lengh<2\\" |
| 54 | Stud Prepartion, dia<1\\", lengh<4\\" |
| 55 | Stud Prepartion, dia<1\\", lengh<8\\" |
| 56 | Stud Prepartion, dia<1\\", lengh<12\\" |
| 57 | Stud Prepartion, 1\\" |
| 58 | Stud Prepartion, 1\\" |
| 59 | Stud Prepartion, 1\\" |
| 60 | Stud Prepartion, 1\\" |
| 61 | General Turning operation per hr. |
| 62 | General Drilling operation per hr. |
| 63 | General Boring operation per hr. |
| 64 | General Tapping operation per hr. |
| 65 | General Miller operation per hr. |
| 66 | General Shaper operation per hr. |
| 67 | General Threading operation per hr. |
| 68 | Prep of Nipple, dia<1/2\\", Length<4\\" |
| 69 | Prep of Nipple, dia<1\\", Length<6\\" |
| 70 | Prepartion of Key, size<1/2\\" x 1/2\\" |
| 71 | Prepartion of Key, size<1\\" x 1\\" |
| 72 | Prepartion of Key, size<2\\" x 2\\" |
| 73 | Stem Nut preparation, ID <1\\" |
| 74 | Stem Nut preparation, 1\\">ID <2\\" |
| 75 | Stem Nut preparation, 2\\">ID <4\\" |
| 76 | Stem Nut preparation, 4\\">ID <8\\" Please Enable Macros to View BoQ information |
