|
| 1 | Earth in cutting or embankment in ordinary soil excavation to be done from of regular pits not exceeding 1/2 m.in depth and work embankment to be done in 20 cm.Layers including ramming and dressing the surface to required level and slope and also including 1.5 m. lift and 30 m.lead the from cutting to be used in making embankment or to be deposited as spoil banks within 30 m. distance as directed by the engineer in charge cartage up to 5.0 km. |
| 2 | Earthwork in surface excavation not exceeding 30cm in depth but exceeding 1.5m in widthas well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m as directed by Engineer-in charge 2.1.1 all kind of soil, 0 to 30 mtr ITEM- DSR 2.8.1 |
| 3 | Providing and laying in cement concrete of M10 grade with minimum cement content of 220kg/cum ITEM- DSR 4.20.1.1 |
| 4 | Brickwork with common burnt clay F.PS.(non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4 (1Cement : 4 Coarse Sand) ITEM- DSR 6.1.1 |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering , finishing and reinforcement -all work up to plinth level 1:1.5:3 (1cement: 1.5 Coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) ITEM NO: DSR - 5.1.2 |
| 6 | Mild steel or iron in plane worksuch as reinforcement brick work (when not wrought to include in over all rate) with all comp. |
| 7 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement 12 mm cement plaster ITEM NO: DSR - 13.9.1 |
| 8 | Construction of granular sub base by provided well graded materials ,spreading in uniform layer with motor grader on prepared surface,mixing by mix in place method with rotovator at OMC and compacting with smooth wheel rollar to achieve the desired density complete as per technical Specification claause 401 |
| 9 | Providing and laying of concrete block pavement having thickness 80 mm as per drawing and technical specefications clause 1504 |
| 10 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 graded aggregat stone) item no ITEM- DSR 4.10 |
| 11 | Sign board |
| 12 | S/f of 8 meter GI octagonal pole of approved make (top dia 70mm bottom 130mm & base plate 16mm thick) having thickness 3 mm with single arm bracket length of 1 mtr of 1 meter length in RCC 1:2:4 foundation bolt including the cost of Foundation Excavation & Back filling and required T&P complete in all respect (SR No. 21.22) |
| 13 | SF of LED street light fitting having dia cast alminum body and diffuser//reflector with driver set suitable for 150 Watt confirming to IP-66 protection complete in all respect SR 23.18 |
| 14 | S/Lof 25sqX4 mm core alminium conductor PVC insulated armoured served sheathed cable 1100 Volte grade as a dept of below ground level over cushion of 75 mm below ground complete in all respect SR20a1.10 |
| 15 | S/L of 40mm Dia HDP Pipe complete in all respect (MR) (B class Pipe) |
| 16 | S/f of plain or pin type alminium lug to the cable leed included with tape and making connection etc SR 504 € |
| 17 | S/f of junction plaste housing brass terminal myca sheet 10 Amp MCCB (MR) |
| 18 | S/L of 6mmX2 Core copper cable under pole |
| 19 | Sf of automation street light cubical control pannel painted with anti corrosive and acid proof paint HRC fuse insulation switching metering complete in all respect Sch.807(ii) |
| 20 | S/B of earthing set complete in all respect as per SR 703 |
| 21 | S/F of Radium Sticker pasting on Pole M.R. |
| 22 | S/F of tricolour sparkle tiranga light with jointer and adopter. Please Enable Macros to View BoQ information |
