|
| 1 | M&L for preparation of black top surface by brushing with mechanical broomer for removing caked mud etc sweeping with mechanical broomers and finally with air compressors to remove all loose dirt etc, having black top surface and applying evenly a priming/tack coat with paving bitumin VG-10 @ 5 kg per 10 Sqm complete all as specified and directed. |
| 2 | M&L for bituminous premix asphaltic semi-dense concrete 30mm consolidated thickness using viscosity grade VG-30 @ 5.5% binder content by weight or total mix rolled and compacted to required camber and gradient with 8 to 10 tone capacity power roller mixed in hot mix plant and using mechanical paver complete all as specified and directed. |
| 3 | M&L for premixed bituminous macadam laid/rolled with power roller 8 to 12 tonne and compacted to required gradient & camber (consolidated thickness 75mm or less) and binder content 4% (using Viscocity grade Bitumen VG-30) by weight of total mix complete all as specified and directed. |
| 4 | M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2 mm thick single coat as in centre line and edge line road marking of 100 mm width thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directed. |
| 5 | S&F solar road stud having 3 LED's of colours red/yellow/blue/green tough pressure dia casted aluminium alloy of size 125x125mm of height 20 mm with fixing with epoxy. LED's solar cells battery & light sensor well protected in side under tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge in 8-10 hours including removal of old unserviceable stud complete all as specified and directed. |
| 6 | S&F in repair metal delineator of superior ellipsoidal design of height 800mm, base depth 300mm duly powdered coated black pole with 3 White retro reflectors embedded in PCC 1:2:4 type B-1 complete all as specified & directed. |
| 7 | S&F cat eye's dual directional reflective of tough poly carbonate of retrofeflective glass beads of colour white/red/yellow side provided with including removal of old unserviceable cat eye complete all as specified and directed. |
| 8 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 9 | M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 10 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 11 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 12 | M&L for 60mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed.. |
| 13 | S&F factory made Kerb stone of size 450 x 150 x 300mm made in PCC 1:2:4 type B-1 (using 20mm graded aggregate) and the like including weathering, slightly rounded or chamfered angles complete all as specified and directed. |
| 14 | M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate ) as in coping, Kneelers, apex stones bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 15 | M&L for preparation of old painted concrete surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 16 | Dismantling timber scantling 40 sqcm & over in section in unframed work in any position complete all as specified and directed. |
| 17 | S&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section, MS tubes, flats square bars etc fixed indepently or framed or without connecting plates, trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed. |
| 18 | Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 19 | M&L for brick work with old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. |
| 20 | M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair complete all as specified and directed. |
| 21 | Demolition of reinforced cement concrete as in ground floors and pavings n exc 15 cm thickness complete all as specified and directed. |
| 22 | M&L RCC 1:2:4 (Nominal Mix), type B-1 ( using 20mm graded aggregate) for fundation, including rafts, fottings, foundations beams: plinth beams, bases for columns etc bases for cloumns, etc basement slabs, under reamed piles and mass concrete all as specified and directed. |
| 23 | M&L for Form work to sides of concrete foundations, fting bases of clumns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter for rough finished surface complete all as specifed and directed. |
| 24 | S&F TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending sprally for hooking for colr columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and directed. |
| 25 | S&F TMT bar 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending sprally for hooking for colr columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as directed and specified. |
| 27 | S&F wall cladding ceramic tiles 7-8 thick area of each tile exc 0.10 sqm but n.exc 0.20 sqm of any colour and pattern set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick rendering on wall in CM (1:4) and surface finished even & rough complete all as specified and directed. |
| 28 | M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed Please Enable Macros to View BoQ information |
