|
| 1 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | M&L for PCC 1:4:8 type D-2, (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 3 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 4 | M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 5 | M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 7 | Removing surplus excavated material (Soil) to distance not exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 8 | M&L for PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in window or door cills, lintels, copings. kneelers, apex stones, posts, boundary pillars, bonders (for stone walling), brackets, etc. with plain fair faces, including chamfers, weatherings, throating etc. complete all as specfied and directed. |
| 9 | M&L for PCC 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed. |
| 10 | M&L for machine pressed precast cement concrete kerb stone of size 300x150x450mm (Machine pressed factory ready made ) fixed in PCC 1:3:6 type C-2 , including necessary earth work for embedding in position, temping ground around blocks and removal of rubbish/surplus soil etc, complete all as specified and directed. |
| 11 | M&L for preparation of new or previously untreated concrete/plastered surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint any tint over a coat of exterior grade primer complete all as specified and directed. |
| 12 | M&L for forming embankments including raising (or lowering) earth filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 13 | M&L for 200mm dia DWC HDPE pipe of any colour suitable for water flow and confirming to IS 16098-2 and pressure rating SN-4/SN-8 into laying, Jointing and making connection to existing Chamber etc as required at site as per manufacturers instructions, complete all as specified and directed.(Excavation will be paid seperately) |
| 14 | Demolition of cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 15 | M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crused stone agg) as in sub base complete all as specified and as directed. |
| 16 | M&L for 80mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-40 Grade with grey cement and no pigment complete all as specified and directed. |
| 17 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 18 | S&F framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 19 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 20 | S&F in repair metal delineator of superior ellipsoidal design of height 800mm, base depth 300mm duly powdered coated black pole with 3 White retro reflectors embedded in PCC 1:2:4 type B-1 complete all as specified & directed. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided not otherwise provided for complete all as specified and directed. Please Enable Macros to View BoQ information |
