|
| 1 | Dismantling of plain or corrugated steel sheeting any gauge, thickness, includung Nainital or similar pattern roof covering complete all as specified and directed. |
| 2 | S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F steel work in tubular section for purlin/rafters etc including special shaped washer etc. complete using induction butt welded tubes conforming to I.S. 1161-1998 grade St- 240 complete all as specified and directed. |
| 5 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc gde Fe-410 W (Gde E- 250) quality A complete all as specified and directed. |
| 6 | M&L for applying two coat of Synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation of new syrfaces complete all as specified and directed. |
| 7 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed. |
| 8 | S&F aluminium anodised snap grid frame work of size 605mm x 605mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of distemper oil emulsion complete all as specified and directed. |
| 9 | Taking down chowkats or frame, n. exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 10 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 & n.exc. 4 sqm in each complete all as specified and directed. |
| 11 | Taking down and Refixing shutter in same opeining of any description exc 1 sqm but n exc 2 sqm each in same or other opening complete all as specified and directed. |
| 12 | Taking down shutter of any description n exc 1sqm each complete all as specified and directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 14 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, cooler stands (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified and directed. |
| 15 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and drawing complete all as specified and directed. |
| 16 | S & F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC \\"C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing complete all as specified and directed. |
| 17 | S&F 75 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed. |
| 18 | Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 19 | Supply and fix in for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 20 | M & L for MS flat iron work as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc conforming to Fe-290 Gde-E-165 complete as specified and directed. |
| 21 | M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165 complete all as specified and directed. |
| 22 | M&L for Welding in repairs not exceeding 6mm thick and not exceeding 2.5 cm in length complete all as specified and directed. |
| 23 | S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 24 | S & F 35 mm thick, 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 25 | S & F 35mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and directed. |
| 26 | S&F powder coated aluminium anodised frame for doors, windows, ventilators with one or morerebates including joining cleat for fixing etc. complete all as specified and directed. |
| 27 | S&F Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 28 | Supply and fixing of Anodised aluminium sliding window, three track including following components / specification complete all as specified and directed. (i) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing. (ii) All vercal/ horizontal joint shall be of extruded aluminium section so as to avoid any play between jointed members. (iii) all other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, srews, etc. (iv) Stainless steel wire cloth, 036 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples, etc. (v) Sheet glass 4 mm thick selected quality and glazing with oil putty or fixed with wooden beads in square not exceeding 0.5 Sqm in each pane (vi) Rest all as specified in drawing no CEZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5, 5R/5 complete all as specified and directed. |
| 29 | Supply & fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 30 | Dismantling timber scantlings 40 Sq. cm and over in section and in any position in unframed work complete all as specified and directed. |
| 31 | M&L for 2nd class hardwood well seasoned, scantlings, wrought, timber fixed, complete all as specified and directed. |
| 32 | Supply and fix for 2nd class hard wood in plain, solid, straight chowkats and framed, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 33 | S&F in Repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 34 | S & F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 35 | S & F in repairs curtain rails, harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 36 | S&F in repairs 300 mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed all as spd complete all as specified and directed. |
| 37 | S&F in repairs Extruded aluminium alloy handle, fabricated type, anodised, 125mm size, (ISI marked) complete all as specified and directed. |
| 38 | S&F in repairs 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 39 | Supply and fixing in repairs butt hinges 100 mm long medium weight cold rolled MS fixed in repairs to wooden or pressed steel/angle iron frames by welding all as specified complete all as specified and directed. |
| 40 | Taking down Cupboard Shutters of any description exc 1 Sqm and n exc 2 Sqm complete all as specified and directed. |
| 41 | S & F 18/19mm pre-laminated particle board interior grade prelaminated both side with decorative choice lamination fixed with screws to timber frame work as in shutter of cup board and other similar work complete all as specified and directed. |
| 42 | S & F 40mm Continuous (piano) hinges Width of flaps (when open), mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 43 | Supply and fixing butt hinges 100mm long cold rolled medium weight complete all as specified and directed. |
| 44 | Supply and fixing 150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed. |
| 45 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long complete all as specified and directed. |
| 46 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 150mm long complete all as specified and directed. |
| 47 | Supply and fix 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 48 | M&L for preparation to new or previously untreated steel surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed. |
| 49 | M & L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 50 | S & F in repair Wire netting of stainless steel wire 1.4mm dia and 12mm Size of mesh is fixed with tinned tacks of stainless steel wire staples complete all as specified and directed. |
| 51 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 52 | S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed. |
| 53 | Material and labour for providing and injecting chemical emulsion for post constructional anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litre peri linear metre including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 Cement : 2 Coarse sand) to match the existing floors drilling and plugging holes etc complete all as specified and directed. |
| 54 | M & L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 55 | Material and labour for providing and injecting chemical emulsion for post constructional anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with cement mortar (1:3) & painted with white or coloured paint complete all as specified and directed |
| 56 | Dismantling of stone slabs or tiles of any description or thickness as in floors, pavings, aprons, pathway etc laid dry or laid dry and pointed complete all as specified and directed. |
| 57 | M&L for Laquer coated Chequered cement concrete coloured tiles 30cmx 30cmx25mm thick set jointed in neat cement slurry and pointed in grey cement mixed with pigment to match the shade of tiles incl 15 mm thick cement screed in CM 1:6 complete all as specified and directed. |
| 58 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 59 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 60 | M & L for 25 mm thick PCC type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling and layer complete all as specified and directed. |
| 61 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed. |
| 62 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in floor, over and including 20mm thick screed bed in CM 1:4 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed. |
| 63 | M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement Mortar 1:4 complete all as specified and directed. |
| 64 | M & L 75 mm thick PCC type D-2 1:4:8 ( using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 65 | S&F in repairs for MS grating CP 75/100mm dia, without hole and with hole for waste pipe of approved make including fixing with Cement Mortar to floor/nahani traps etc complete all as specified and directed. |
| 66 | S & F in repairs 600 x 450mm bevelled edged mirror or selected qualtity glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and directed. |
| 67 | S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 68 | Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 69 | Refixing 15mm old steel tubing and connection in new or old position (wall, ceiling, floors, etc.) complete all as specified and directed. |
| 70 | S & F steel tubing 15mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and directed. |
| 71 | Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 72 | Refixing 20mm old steel tubing and connection in new or old position (wall, ceiling, floors, etc.) complete all as specified and directed. |
| 73 | S & F steel tubing 20 mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and directed. |
| 74 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete all as specified and directed. |
| 75 | S & F in repairs 15 mm bore Bip taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 76 | S & F in repairs, 15 mm bore, bib tap, PTMT (PVC) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 77 | S & F in repairs, stop valves, 15 mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 78 | S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 79 | S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flangescomplete all as specified and directed. |
| 80 | S&F in repairs health faucet cast copper alloy with push button flexible steel pipe with PVC lining of 1 mtr long suitable for 15mm pipe complete all as specified and directed. |
| 81 | S&F in repairs flexible (coil shaped) PVC waste pipe for sink and wash hand basin 32/40mm dia, length not less than 70 cm, connected to PVC waste coupling/fittings complete all as specified and directed. |
| 82 | S & F in repairs, 10 litres capacity PVC valveless syphonic action type, dual type flushing cistern , low level with inlet, ball valve, float bracket & flush pipe complete all as specified and directed. |
| 83 | S & F in repairs Vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including PVC (HDPE) 32 mm bore waste pipe,Brass CP couplings 32 mm complete all as specified and directed. |
| 84 | S & F in repairs, 15 mm bore pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 85 | S & F in repairs Waste coupling of PTMT (half or full threaded) (40mm-60 gms) for sink complete all as specified and directed. |
| 86 | S&F in repairs, concealed stop valve fancy type cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed. |
| 87 | S & F in repairs, swivel shower rose of PTMT, 15mm bore (minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum wt 40 gms) complete all as specified and directed. |
| 88 | S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified and directed. |
| 89 | S&F for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) front or back inlet including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and making good to floor complete as in repair complete all as specified and directed. |
| 90 | S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. |
| 91 | Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water tanks complete as specified in SSR Part-I complete all as specified and directed. |
| 92 | S&F in repair top cover for water storage tank of any capacity, the colour of cover shall be matching with the existing tank's colour complete all as specified and directed. |
| 93 | S & F in repairs, 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed. |
| 94 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etccomplete all as specified and directed. |
| 95 | M&L for rendering 15mm thick cement plaster in two coats (10mm under coat and 5mm finishing coat) in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement, mixed with liquid water proofing compound by the weight of cement in second coat as per manufacturers instructions complete all as specified and directed.Note :- Water proofing compound shall be measured and paid seperately. |
| 96 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 97 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed. |
| 98 | M&L for GI wire netting of 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings etc. including all laps, cutting and waste fixed with tinned tacks of wire staples complete as specified and directed. |
| 99 | M&L for rendering 15 mm thick in two layers (10mm + 5mm) externally on one side of lathing in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement mixed with liquid water proofing compound as per manufcatureres instructions in top layer of 5mm thick complete all as specified and directed. Note :- Water proofing compound shall be measured and paid seperately. |
| 100 | M&L for rendering 10 mm thick on other side of lathing in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 101 | Supply only liquid water proofing compound complete all as specified and directed. |
| 102 | M & L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 103 | M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 104 | M&L for preparation of newly plastered surfaces of walls & applying two coat of distemper oil emulsion over one coat of chalk whiting priming paint over and including 3mm wall care putty to make the surface even and smooth complete all as specified and directed. |
| 105 | M & L for 75 mm thick plain cement concrete 1:3:6, type c-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with bitumen mastic filling in proportion of bitumen and sand (1:2) complete all as specified and directed. |
| 106 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 107 | M & L for brick work with sub class 'B' bricks old sized well burnt straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed. |
| 108 | M & L for brick work with sub class -B old size bricks well burnt straight or curved on plan to any radius in half brick thick wall built in CM 1:6 complete all as specified and directed. |
| 109 | Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 110 | Material and labour for RCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) nominal mix as in slab supported on walls, beams and column in floors, roof landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed. (Note : Reinforcement shall be measured and paid seperately under relevant) |
| 111 | Material and labour for TMT bar 10 mm and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 112 | M&L form work to soffit of suspended slab such as roof, floor slabs, landing similar work for rough finished surfaces of concrete, flat complete all as specified and directed. |
| 113 | M&L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 5cm but not exc 10cm wide for rough finished surfaces of concrete, flat complete all as specified and directed. |
| 114 | M & L for 20mm Granite (of any type) work (tablerubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 115 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 116 | M&L for Checking and attending to Plumber complaints like no water supply, water leakage from bib taps, stop cock, pillar taps, flushing cisterns, wash hand basins, urinal, wall mixer/basin mixer, angle valve, concealed valve,shower rose , health faucet & jet, float valve, of any type & size or any other water supply fittings/fixtures incorporated in plumbing works any where in the bldgs which is causing obstruction to water supply in area & requires plumbing including carrying out minor repair such as replacement of washers, check nuts, tightening of fittings of flushing cistern or any other repair not mentioned herein before etc using petty materials like washers, thread (soot), Teflon tape, M-Seal, screws (any size), nails (any size) to make water supply/plumbing lines & fiittings/fixtures functional and leak proof to the satisfaction of the occupants/ users complete all as directed.Note : (i) The rate of above mentioned item incorporates use of any materials & equipment used for completing the complaints on time to the satisfaction users/occupants. (ii) Contractor or his authorised representative shall collect such type of complaints mentioned here in above from complaint cell at 8.30 AM on daily basis except Sunday & Holiday & submit the completion of complaints on the next day duly signed by the users/occupants. No extra payment shall be made on account of collection of complaint and submission of complaints . (iii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor. (iv) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.That complaint should also be completed within 24 Hrs without fail otherwise penalty @ the rate 1000/- per complaint will be recurred for contractor due payment and decision of GE shall be final and binding |
| 117 | M&L for Checking and attending to carpenter complaints from all joinery works/cup boards etc including petty repairing wk with materials like nails/screws/beads/oil putty as per site requirement to the satisfaction of the occupants/users complete all as specified and directed.Note : (i) The rate of above mentioned item incorporates use of any materials & equipment used for completing the complaints on time to the satisfaction users/occupants. (ii) Contractor or his authorised representative shall collect such type of complaints mentioned here in above from complaint cell at 8.30 AM on daily basis except Sunday & Holiday & submit the completion of complaints on the next day duly signed by the users/occupants. No extra payment shall be made on account of collection of complaint and submission of complaints . (iii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor. (iv) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.That complaint should also be completed within 24 Hrs without fail otherwise penalty @ the rate 1000/- per complaint will be recurred for contractor due payment and decision of GE shall be final and binding |
| 118 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified including dismantling of PCC & taking out old unserviceable 110mm bore PVC pipe with fittings & making good disturbed area complete all as specified and directed. |
| 119 | S&F PVC (SWR) pipe 110mm bore, single socketed in any length with rubber ring joints fixed to walls fixed in repair complete all as specified and directed. |
| 120 | S&F PVC (SWR) branch piece single (single Y)110 mm bore with access door fixed in repair complete all as specified and directed. |
| 121 | S&F PVC (SWR) bends any radius 110 mm dia fixed in repair complete all as specified and directed. |
| 122 | S & F 75mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 123 | S&F PVC(SWR) Vent cowl 75mm dia complete all as specified and directed. |
| 124 | S&F PVC(SWR) Vent cowl 110mm dia complete all as specified and directed. |
| 125 | S & F PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm dia complete all as specified and directed. |
| 126 | S & F in repairs, PVC (SWR) 75 mm dia, floor trap, plain with granting including jointing to waste pipe with solvent cement and fixing in PCC 1:2:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
