|
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Sqm each, removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 2 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm not exceeding 4.0 Sqm each, removing from the site including cutting holes required for taking out existing hold fast etc.complete all as specified and as directed. |
| 3 | Taking down shutter from frame exc. 1 sqm but n. exc. 2 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge. |
| 4 | Taking down shutter from frame exc. 1 sqm but n. exc. 2 sqm each and refixing in same opening after resecuring or easing , and adjusting complete all as specified and directed by Engr-in-charge. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specifedand directed |
| 6 | S&F mild steel confirimg to Fe 410-W(Gde-E- 250)quality- A works as in doors or gates (ornamental) of angle or other sectons with gusset plates, rails, braces etc complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed |
| 7 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls complete all as specified and directed |
| 8 | S&F MS plate Fe 410-W (Gde E-250 quality A) (Plane/Chequered), 5mm thick as in open drain covers with 02 Nos of 150mm size MS handle in each plate etc complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and as directed. |
| 10 | M&L for greasing and easing in position of mild steel rolling shutters of area n.exc 10sqm each for full movement and for easy operation for shutters including taking down of old Shutter complete all as directed by Engr-in-Charge. |
| 11 | M&L for greasing and easing in position of mild steel rolling shutters of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters including taking down of old shutter complete all as directed by Engr-in-Charge. |
| 12 | S&F mild steel rolling shutters, with out ball bearing, thickness of laths 1.00mm including top cover, anchoring rod, hasp and staple and erected in position as indicated, complete with push pull or manual type including taking down of old existing shutter complete all as specified and directed by Engr-in-Charge |
| 13 | M&L for preparing new or previously untreated steel surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of red oxide primer complete all as specified and directed. |
| 14 | M&L for preparing old painted steel surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 16 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 17 | S& F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 18 | Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 19 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top & bottom rail mild steel frame shall be covered with heat moulded plain colour PVC “c” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 20 | S&F of aluminium door / window / ventilator / partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc, including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors including connected items, with and making good to the disturbed portion with its original specifications incl taking down existing members/frame any position complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F of anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 22 | S&F for concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified & as directed. |
| 23 | S&F in repairs to aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified & as directed. |
| 24 | S&F 4 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden beads, area n. exceeding 0.50 Square Metre each pane including hacking out old glass complete all as specified and as directed. |
| 25 | S&F 4 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden beads, area exceeding 0.50 Square Metre each pane incluidng hacking out old glass complete all as specified and as directed. |
| 26 | S&F in repairs to rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors etc complete all as specified and as directed. |
| 27 | S&F in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick alum,inium alloy sheet foundation box, main ody with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed, complete all as directed by Engr-in-Charge |
| 28 | S & F in repairs floor door stopper of Aluminium alloy body and tongue, over all length of cover plate 150mm anodised with hard drawn steel spring, fixed to shutters complete all as specified and as directed. |
| 29 | S&F in repairs to 9mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed |
| 30 | S&F in reapirs to stainless steel butt hinges 100mm size complete all as specified and as directed. |
| 31 | S&F in repairs to aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed. |
| 32 | S&F in repairs to Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 33 | S&F in repairs to Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed. Please Enable Macros to View BoQ information |
