|
| 1 | SUPPLY OF FITTING BLOCK FORGED - STAINLESS STEEL FOR AG & UG PIPING (LOT-4) FOR MSB, PFCC, GDS, FF FOR NREP PROJECT incuding TPI charges as specified in Material Requisition. |
| 2 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 3 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 4 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 5 | ELB 90 DEG SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 6 | ELB 90 DEG SS DUAL (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 7 | ELB 90 DEG SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 8 | ELB 90 DEG SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 9 | ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 |
| 10 | ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 |
| 11 | ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 |
| 12 | ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 13 | ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 14 | FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 15 | FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 16 | FCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 |
| 17 | RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 18 | RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 19 | RCPL SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 20 | CROSS SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 21 | CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 22 | CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 23 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 24 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 25 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 26 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 27 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 28 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 29 | HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 30 | HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 31 | HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 32 | HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 33 | NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP316/316L, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F316/316L IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 34 | NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP316/316L, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F316/316L IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 35 | NIPPLE SS DUAL, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP304/304L, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F304/304L IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 36 | NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 |
| 37 | SUPPLY OF FITTING BLOCK FORGED - STAINLESS STEEL FOR AG & UG PIPING (LOT-4) FOR MSB, PFCC, GDS, FF FOR NREP PROJECT incuding TPI charges as specified in Material Requisition. |
| 38 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 39 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 40 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 41 | ELB 90 DEG SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 42 | ELB 90 DEG SS DUAL (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 43 | ELB 90 DEG SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 44 | ELB 90 DEG SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 45 | ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 |
| 46 | ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 |
| 47 | ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 |
| 48 | ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 49 | ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 50 | FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 51 | FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 52 | FCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 |
| 53 | RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 54 | RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 55 | RCPL SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 56 | CROSS SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 57 | CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 58 | CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 59 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 60 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 61 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 62 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 63 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 64 | TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 65 | HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 66 | HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 67 | HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 68 | HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 69 | NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP316/316L, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F316/316L IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 70 | NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP316/316L, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F316/316L IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 71 | NIPPLE SS DUAL, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP304/304L, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F304/304L IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 72 | NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 Please Enable Macros to View BoQ information |
