|
| 1 | Dismantling RCC posts or struts any section, including taking out embedded portion and making good to distrubed in concrete or brick work complete all as specified and as directed. |
| 2 | Dismantling Steel posts or struts any section, including taking out embedded portion and making good to distrubed in concrete or brick work complete all as specified and as directed. |
| 3 | Dismantling RCC posts or struts any section, including taking out embedded portion and making good to distrubed natural ground complete all as specified and as directed. |
| 4 | Dismantling Steel posts or struts any section, including taking out embedded portion and making good to distrubed natural ground complete all as specified and as directed. |
| 5 | M&L for TMT steel bars 10 mm dia and above, as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and as directed. |
| 6 | All as per item No 05.00 (here-in-before) but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders. |
| 7 | M&L for providing reinforced cement concrete type B-1, (1:2:4) (using 20mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exc 100 sqcm and not exc 250 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and as directed. |
| 8 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, fordoors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 and similar work of any description complete all as specified and as directed. |
| 9 | S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm diabarbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mildsteel wire, staples or steelpins, etc. as directed (each line wire to be measured) complete all as specified and as directed. |
| 10 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil complete all as specified and as directed. |
| 11 | M&L for PCC Type C-2 (1:3:6) (using 40mm graded stone aggregate) as in foundation complete all as specified complete all as specified and as directed. |
| 12 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed. |
| 13 | Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete including dismantling of old one from its positions all as specified and as directed. |
| 14 | M&L for mild steel round bars 10 mm dia and over cut to length bend to shape as required, including straightening etc as required in horizontal bar for securing chain link fencing including dismantling of old mild steel work of any description complete all as specified and as directed. |
| 15 | Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long - 11 to 15mm Diameter of neck complete all as specified and and as directed. |
| 16 | M&L for preparation of new steel surface n exe 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and and as directed. |
| 17 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and and as directed. |
| 18 | M&L 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base finished even and rough including demolition of old cement concrete complete all as specified and as directed. |
| 19 | M&L 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base finished even and rough including demolition of old cement concrete complete all as specified and as directed. |
| 20 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed with grey cement and no pigment laid over and including 50 mm thick sand cushioning and pointed in colour cement mortar (1:3) including dismantling of old paver block and removing serviceable paver block to store and rubbish off the premises complete all as specified and as directed. |
| 21 | M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed for laying floor finishes in cement mortar (1:6) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments including dismantling of old tiles including cement mortar bedding of any description and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 22 | M&L for heavy duty full body vitrified digital paving tiles of size 300 x300x(9-10) mm, with pigment set and jointed in neat cement slurry and pointed in coloured cement to match the the shade of tile laid over and including 15 mm thick screed bed in CM (1:6) including dismantling of old tiles including cement mortar bedding of any description and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 23 | M&L for brick work with sub class `B' bricks(using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) including demolition of old brick work from its position complete all as specified and as directed. |
| 24 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete work and surfaces finished even and smooth without using extra cement including taking down old plaster from its positions complete all as specified and as directed. |
| 25 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete work and surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 26 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of primer of approved shade on walls complete all as specified and as directed. |
| 27 | M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified and as directed. |
| 28 | M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 29 | S & F in repairs Providing precast cement concrete louvres and jallies,type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) 25mm thick (measured solid) and setting in cement mortar (1:4),including necessary form work and mould complete all as specified and as directed. Please Enable Macros to View BoQ information |
