|
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Sqm each, removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 2 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm not exceeding 4.0 Sqm each, removing from the site including cutting holes required for taking out existing hold fast etc.complete all as specified and as directed. |
| 3 | Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge. |
| 4 | Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each and refixing in same opening after resecuring or easing , and adjusting complete all as specified and directed by Engr-in-charge. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specifedand directed |
| 6 | S&F mild steel confirimg to Fe 410-W(Gde-E- 250)quality- A works as in doors or gates (ornamental) of angle or other sectons with gusset plates, rails, braces etc complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed |
| 7 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls complete all as specified and directed |
| 8 | M&L for preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and as directed. |
| 9 | M&L for greasing and easing in position of mild steel rolling shutters of area n.exc 10sqm each for full movement and for easy operation for shutters including taking down of old Shutter complete all as directed by Engr-in-Charge. |
| 10 | M&L for greasing and easing in position of mild steel rolling shutters of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters including taking down of old shutter complete all as directed by Engr-in-Charge. |
| 11 | M&L for repair of opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area n.exc 10sqm each complete all as directed by Engr-in-Charge. |
| 12 | M&L for repair to opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area exc 10sqm and n.exc 20sqm each complete all as directed by Engr-in-Charge. |
| 13 | S&F of rolling shutter without ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple, gear operated type with chain wheel and hand chain and primer erected in position including taking down of old unserviceable shutter complete all as directed by Engr-in-Charge. |
| 14 | S&F of steel rolling shutters, with out ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and erected in position as indicated,complete: push pull or manual type including taking down of old Shutter complete all as specified and directed by Engr-in-Charge |
| 15 | S&F of collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specifed and directed |
| 16 | M&L for preparing new or previously untreated steel surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of red oxide primer complete all as specified and directed. |
| 17 | M&L for preparing old painted steel surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed |
| 18 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 20 | S& F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 21 | Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 22 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top & bottom rail mild steel frame shall be covered with heat moulded plain colour PVC “c” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 23 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 24 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 25 | S&F of 35mm thick factory made pre laminated flush door shutters, 0.90 mm thick finishes on both face in hi-gloss and confirming to IS -2046 and solid core construction, with particle board core and plywood face panels, suitable for exterior & interior grade door, commercial type on both sides complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F of second class Hardwood 35 mm thickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specified and directed |
| 27 | S&F of 35mm thick factory made framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed |
| 28 | S&F 12 mm thick vertical toughened glass including frame as in door shutters / partition with including stainless steel SS-304 patch fitting fixed with Anchor fastner, etching, pivot arrangements complete each glass panes shall be exceeding 1.5sqm, but not exceeding 2 sqm each, all edges of glass shall be diamond polished, accurate designed holes to be installed by means of steel fittings including hacking out old Glass complete all as specified and as directed Note :- SS Fitting shall be paid separately under repective items of BOQ. |
| 29 | S & F in repairs kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 100mm including telescopic channel of 20 inch length complete all as specified & directed by Engineer -in -Charge.Make Life time -code : DSN 21 or equivalant |
| 30 | S&F in repairs kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 150mm including telescopic channel of 20 inch length complete all as specified & directed by Engineer -in -Charge.Make Life time -code : DSN 21 or equivalant |
| 31 | S & F in repairs kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm including telescopic channel of 20 inch length complete all as specified & directed by Engineer -in -Charge.Make Life time -code : DSN 21 or equivalant |
| 32 | S&F in repairs 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete prepared as cup board shutter and fixed with wooden frame-work complete alll as specified and directed |
| 33 | Supply & installation in repairs of invisible grill as per below mentioned specification in multistorey buildings up to 22nd storey in balcony / passage / corridor / lobby / window etc, including all taxes, labour, tools, materials, PF/ESIC etc. Payment shall be done as per actual measurement of area (outer to outer) of fixed grill.Specification: • Vertical Gap between two threads-50 mm • Invisible grill 2.5 mm thick 316 grade steel • 4 Nos. Horizontal Rope equally distributed in Height. • 7 X 7 Core Wire SS 316 L Marine Grade Nylon Coated • 32 mm Aluminium Track (Duly White PU Coated)• SS 304 Fittings, SS 316 Stiffener • Aluminium Rivet for Fixing Cover with section• Wire rope diameter- 3 mm• Nickel plating Stiffener SS 316• Screw fastener HRD C M8*80 mm, complete all as directed by Engr-in-Charge |
| 34 | S&F of aluminium door / window / ventilator / partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc, including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors including connected items, with and making good to the disturbed portion with its original specifications incl taking down existing members/frame any position complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F of anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 36 | S&F of concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as directed by Engr-in-Charge |
| 37 | S&F in repairs to aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as directed by Engr-in-Charge |
| 38 | S&F 4 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden beads, area n. exceeding 0.50 Square Metre each pane including hacking out old glass complete all as specified and as directed. |
| 39 | S&F 4 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden beads, area exceeding 0.50 Square Metre each pane incluidng hacking out old glass complete all as specified and as directed. |
| 40 | S&F in repairs to rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors etc complete all as specified and as directed. |
| 41 | S&F in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick alum,inium alloy sheet foundation box, main ody with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed, complete all as directed by Engr-in-Charge |
| 42 | S & F in repairs floor door stopper of Aluminium alloy body and tongue, over all length of cover plate 150mm anodised with hard drawn steel spring, fixed to shutters complete all as specified and as directed. |
| 43 | S&F in repairs to 9mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed |
| 44 | Supply and Fix in repairs of stainless steel bright polished Handle, 10mm dia of shoot and 200mm long complete all as specified directed by Engr in Charge. |
| 45 | Supply and Fix in repairs of 150 mm sandless steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed by Engr-in-Charge |
| 46 | S&F in repair of SS finish 200mm long 6 lever locking mechanism gives high security with complete safety includinguding fitting 1 Nos Striker plate, 2 Nos Handle, 1 Nos Square shank, 2 Keys, screws as required complete all as directed by Engr-in-Charge |
| 47 | S&F in repairs of 30 mm dia stainless steel handle of 60 cm long and fixed to toughned glass as per manufacturer's instructions of make- Enox or equivalent make as approved by GE, complete all as directed by Engr-in-Charge. |
| 48 | S&F in repairs of stainless steel glass lock fixed to toughened glass as per manufacturer's instructions of make-Enox or equivalent make as approved by GE, complete all as directed by Engr-in-Charge. |
| 49 | S&F in repairs of aluminium body 4 lever Mortice lock, vertical type, size100 mm, omplete all as specifeid and directed |
| 50 | S&F in repairs of cabinet Hinges Soft Close SS 8 Crank complete all as directed by Engr-in-Charge |
| 51 | S&F in repairs of 150 mm Stainless Steel handles, complete all as directed by Engr-in-Charge |
| 52 | S& F in repairs of 4 lever Brass body Locks, drawer, grade I, size 50mm complete all as directed by Engr-in-Charge |
| 53 | S&F in repairs to stainless steel butt hinges size 100 complete all as directed by Engr-in-Charge |
| 54 | S&F in repairs to Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed. |
| 55 | S&F in repairs to Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 56 | S&F in repairs to Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed. Please Enable Macros to View BoQ information |
