|
| 1 | M & L for Rewiding of ceiling fan/ exhaust fan/ wall fan/ cabin / table fan/ pedestal fan of any make with super enameled copper wire of suitable existing size gauge, insulating, varnishing, heating and reassembling and refixing in buildings locations where ordered all as specified and directed by Eng-In-Charge incl testing on completion of the following type of fans. |
| 2 | Exhaust fan of size 300mm sweep |
| 3 | Exhaust fan of size 450mm sweep |
| 4 | Wall/cabin fan of any sweep |
| 5 | M & L for replacement of the following items of fans complete all as specified and as dircted. |
| 6 | Ball bearing for wall/pedestal/cabin /table Exahust fan of any make and sweep |
| 7 | Rotar shaft for wall/pedestal/cabin /table Exahust fan of any make and sweep |
| 8 | Rubber seal for wall/pedestal/cabin /table Exahust fan of any make and sweep |
| 9 | S&F Condenser 1.5 MFD for fans as required |
| 10 | S&F MS clamps for down rod complete with nut bolt and rubber pad, safety pin etc for ceiling fan of any size & make |
| 11 | S&F Condenser 2.5 MFD for fans as required |
| 12 | S&F MS bolt with nut 10mm dia 75mm long |
| 13 | S&F Flexible wire 23/0.0076 twin core copper conductor |
| 14 | S&F Flexible wire 40/0.0076 three core |
| 15 | S&F Down rod for ceiling fan made of GI pipe medium grade 15mm dia of length as reqiured including threading, cutting, drilling including nut bolt, clamp and washer, rubber pads, cotter all as specified and as directed. |
| 16 | S&F Fan blades with screws, nuts and washers for ceiling fans of any make and sweep as required |
| 17 | M & L for complete painting of ceiling fan of any make and sweep with two coats Deco paint (spray painting) of existing colour or ordered colour on one coat of red oxide primer after scratching and making/ preparation of clean and smooth surfaces by applying putty all as specified and as directed by Engr-in-charge including wiring of Sri,SM and MES No fan as directed. |
| 18 | All as per above item No. 11 but of exhaust fan any size. |
| 19 | M & L for taking down the ceiling fan / Exhaust fan/cabin/wall fan/table fan/pedestal fan of any size from various building/locations and opening the same for servicing by cleaning each part with air blower/vacuum cleaner and cloths including replacement of worn out nuts, bolts, screws, washers, split pin rubber pad and oiling greasing and refixing testing complete all as specified and as directed by Engr-in-charge. |
| 20 | Taking down carefully aluminium/ copper point wiring (light, fan, socket, bell or power) from surface / concealed conduit including fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators etc but without taking down surface / concealed conduit and conduit fittings and making good disturbed surfaces complete. |
| 21 | Material and labour for point wiring with PVC insulated 1.5 sqmm FR multistrand copper conductor cable (Phase - Red, Neutral - Black) 1100 volts grade drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including sunken galvanized pressed steel terminal boxes of thickness 1.12 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting electrical fittings, fixtures, accessories etc and 1.0 sqmm FR multistrand copper conductor cable (Green) as continuous earth wire complete for the following :- |
| 22 | One light point controlled by one switch. |
| 23 | One fan point controlled by one switch. |
| 24 | One socket outlet 6 amp controlled by one switch on the same board. |
| 25 | One socket outlet 6 amp controlled by one switch on indepdendent board. |
| 26 | One bell point controlled by one bell push. |
| 27 | One light point controlled by two, two way switches. |
| 28 | Material and labour for point wiring with PVC insulated 2.5 sqmm FR multistrand copper conductor cable (Phase - Red, Neutral - Black) 1100 volts grade drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including sunken galvanized pressed steel terminal boxes of thickness 1.12 mm covered with 3 mm thick phenolic laminated white sheet cover and 2.5 sqmm FR multistrand copper conductor cable (Green) as continuous earth wire complete for one 16 amp socket outlet controlled by one switch on independent board. |
| 29 | Material and labour for point wiring with PVC insulated 1.5 sqmm FR multistrand copper conductor cable (Phase - Red, Neutral - Black) 1100 volts grade drawn into and including PVC Casing capping medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including sunken galvanized pressed steel terminal boxes of thickness 1.12 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting electrical fittings, fixtures, accessories etc and 1.0 sqmm FR multistrand copper conductor cable (Green) as continuous earth wire complete for the following :- |
| 30 | One light point controlled by one switch. |
| 31 | One socket outlet 6 amp controlled by one switch on the same board. |
| 32 | One socket outlet 6 amp controlled by one switch on indepdendent board. |
| 33 | Material and labour for point wiring with PVC insulated 2.5 sqmm FR multistrand copper conductor cable (Phase - Red, Neutral - Black) 1100 volts grade drawn into and including PVC cassin capping medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories including sunken galvanized pressed steel terminal boxes of thickness 1.12 mm covered with 3 mm thick phenolic laminated white sheet cover and 2.5 sqmm FR multistrand copper conductor cable (Green) as continuous earth wire complete for one 16 amp socket outlet controlled by one switch on independent board. |
| 34 | Taking down carefully old aluminium/copper submain wiring from surface / concealed conduit without taking down conduit and conduit fittings complete. |
| 35 | Material and labour for submain wiring alongwith earth continuity conductor with PVC insulated FR multistrand copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed/surface reqd at site including rigid non metallic PVC conduit, medium grade, ISI marked ivory colour with all conduit accessories of following nominal sizes:- |
| 36 | 2x2.5 sq mm + 1x2.5 sq mm (earth) in 20 mm dia conduit. |
| 37 | 2x4 sq mm + 1x4 sq mm (earth) in 20 mm dia conduit. |
| 38 | 2x6 sq mm + 1x6 sq mm (earth) in 25 mm dia conduit. |
| 39 | 2x10 sq mm + 1x10 sq mm + (earth) in 25 mm dia conduit. |
| 40 | Supplying and fixing in replacement switch piano flush button single pole one way 6 amp (duly marked for light, fan, plug etc on body of switch) complete. |
| 41 | Supplying and fixing in replacement switch piano flush button single pole one way 16 amp complete. |
| 42 | Supplying and fixing in replacement socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. |
| 43 | Supplying and fixing in replacement bell push, flush type, 6 amp 240 volts complete. |
| 44 | Supplying and fixing in replacement switch flush type, 6 amp, single pole, two way complete. |
| 45 | Supplying and fixing in replacement socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. |
| 46 | Supplying and fixing in replacement ceiling rose 63 x 25 mm three terminals complete. |
| 47 | Supplying and fixing in replacement door bell, AC, 240 volts, single pole complete. |
| 48 | Supplying and fixing in replacement angle holder, insulated polycabonate body with back plate complete. |
| 49 | Supplying and fixing in replacement hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. |
| 50 | Supply and fix modular in replacement switch 1 way 6A, 1 module |
| 51 | Supply and fix in replacement modular switch 1 way 16A, 1 module |
| 52 | Supply and fix in replacement modular bell push 6A, 1 module |
| 53 | Supply and fix in replacement modular switch 2 way 6A, 1 module |
| 54 | Supply and fix in replacement modular socket, 6A-2/3 pin combined 2 module |
| 55 | Supply and fix in replacement modular socket, 6A/16A-2/3 pin combined 2 module |
| 56 | Supply and fix in replacement fan step regulator, 120 W-2 module |
| 57 | Supply and fix in replacement modular switch socket combination 16A,6pin, 3 module |
| 58 | Supply and fix in replacement of surface and wall mounted LED batten 20W with aluminium body Glare free arclic diffuser ≥ 120lm/watt PF 0.95 220 Volt with integrated electronic driver all as specified and directed . |
| 59 | Supply and fix in replacement of surface and wall mounted LED batten 9W with aluminium body Glare free arclic diffuser ≥ 120lm/watt PF 0.95 220 Volt with integrated electronic driverall as specified and directed . |
| 60 | Supply and fixing in replacement of 5W LED fitting with aluminium body Glare free arclic diffuser ≥ 120lm/watt PF 0.95 220 Volt with integrated electronic driverall as specified and directed. |
| 61 | Supply and fixing in replacement environmental frendly, ultra modern , energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire 1 X 10W comprising of high brightness LEDs all as specified and directed. |
| 62 | Supply and fixing in replacement LED 20W downlights ≥ 120lm/watt PF 0.95 220 Volt made of extruded aluminium housing and high powe LED as as light source with clear diffuser and separate electronic driver all as specified and directed. |
| 63 | Supply and fixing in replacement LED tube light fittings 1 x 20 watts, ≥ 120lm/watt PF 0.95 220 Volt, 4 feet long complete with all accessories internally pre-wired and including connecting up with twisted flexible cable of 0.75 sq mm 3 core copper conductor from ceiling rose to light fittings complete including taking down old UNSV light fitting all as specified and directed. |
| 64 | Supply and fixing in replacement LED tube light fittings 1 x 10 watts, ≥ 120lm/watt PF 0.95 220 Volt , 2 feet long complete with all accessories internally pre-wired and including connecting up with twisted flexible cable of 0.75 sq mm 3 core copper conductor from ceiling rose to light fittings including taking down old UNSV light fitting complete all as specified and directed. |
| 65 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, ≥ 120lm/watt PF 0.95 220 Volt recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size including taking down old UNSV light fitting complete all as specified and directed. |
| 66 | Supplying and fixing in replacement of powder coated, CRCA steel sheet MCB distribution board (minimum thickness 1.2 mm & constructed as per IS : 8623), degree of protection IP 43 - IK 09 with metal double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required of following ratings & ways:- |
| 67 | SPN, 240 volts, 4 ways |
| 68 | SPN, 240 volts, 8 ways |
| 69 | SPN, 240 volts, 12 ways |
| 70 | TPN, 415 volts, 4 ways |
| 71 | TPN, 415 volts, 8 ways |
| 72 | Supplying and fixing in replacement as per load requirement 'C' series MCBs of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- |
| 73 | Single pole 6 to 32 Amp |
| 74 | Double pole 10 to 32 Amp |
| 75 | Double pole, 40 to 63 amp |
| 76 | Four pole 40 to 100 Amp |
| 77 | Note for MCBs & MCB DBs:- MCBs & MCB DBs shall be of the same make. MCB DBs shall be fixed on wall in flush pattern by cutting the wall and making good disturbed surfaces. |
| 78 | Supplying and fixing in replacement as per load requirement 'type AC RCBO , of 10mA to 30mA sensitivity ISI marked including required wiring connections with copper lugs of suitable size provided in RCBO DBs of following ratings:- |
| 79 | 2 P 10 Amp to 20 Amps |
| 80 | 4 P 32 Amp |
| 81 | 4 P 40 Amp |
| 82 | Supplying and fixing in replacement of tripple pole and neutral, powder coated, CRCA steel sheet MCB distribution board constructed as per IS 8623 suitable for MCCB incomer upto 125 amp, 4 way, 415 volts, degree of protection IP 43 - IK- 09 with metal door, recess mounted, having 200 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required all as specified and directed. |
| 83 | Supplying and fixing in replacement of MCCB 4P 125 amp ,16KA ,415 volts etc as required all as specified and directed . |
| 84 | Supplying and fixing in renewal 20 amp, single pole and neutral, industrial type socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16/20 amp as required all as specified and directed by Engr-in-Charge. |
| 85 | Supply and fixing Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole 63 Amps MCB complete all as specified and directed. Make- Havells /C &S/Legrand/L&T |
| 86 | Supplying and fixing in replacement of rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of following sizes:- |
| 87 | 20 mm dia |
| 88 | 25 mm dia |
| 89 | Material and labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work incl taking down old U/s complete. |
| 90 | Supply and fix earth continuity conductor or main earthing lead fixed to wall on battenor recess or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specifed and directed. |
| 91 | Supplying and fixing in replacement of galvanized pressed steel terminal boxes concealed in wall of thickness 1.12 mm covered with phenolic laminated white sheet cover 3 mm thick in renewal of wooden boards of following sizes:- |
| 92 | 100 mm x 100 mm x 60 mm deep. |
| 93 | 180 mm x 100 mm x 60 mm deep. |
| 94 | M & L for servicing of jointing/tapping or checking the electrical connections and securing after defect rectification in existing points/connection/items for light/call bell/fan/regulator/capacitor/sockets/switches /ceiling rose/switch socket boards /junction box/mcb/power sockets or connected circuits till MCB junction box/DB/earthing complete and refixing the existing items after defect rectification as and when required . Note:- (i) Sufficient electrician /helper and other required items are to be provided immediately for repair as and when intimated. (ii) Defect rectification of all connected items in the same circuit / switch socket board will be counted as one job only. |
| 95 | S&F in replacement loopin loop out PVC junction box shock proof, IP66/67 outdoor type, made out of size 300x200x105mm complete with 100 Amp 3 phase & one neutral rated aluminium bus bar with MS clamp of size 35x6mm MCB single 5 to 32 Amps inside box and fixed on pole with MS clamps, nut bolt and washers as specified and directed. |
| 96 | Repair/Repacement of battery capacity of 12v 40AH suitable for solar lighting system based on 100/110Watt panel all as specified and directed |
| 97 | Repair/Repacement of battery capacity of 12v 26AH suitable for UPS based on 100/110Watt panel all as specified and directed |
| 98 | S&F in replacement of LED flood light fitting, 250 Watt LED input voltage 230VC, 50Hz with ingress protection IP 65 or above, CRI>70, PF>0.9, minimum 25000 burning hours, LM-80, lumen efficacy>=100 lumen/watt, THD>20, CRCA housing including fixing arrangement like clamps, nuts, bolts, washers, 120W LED lamp with all accessories pre-wired and connecting with twin corw twisted flexible copper conductor cable with all necessary staging, etc for fixing at any locations incl taking down the old unserviceale fittings complete all as specified. |
| 99 | All as per Sl item No. 60 above but for 200W LED flood light fitting complete all as specified. |
| 100 | All as per Sl item No. 60 above but for 200W LED flood light fitting complete all as specified. |
