|
| 1 | Dismantling plain or corrugated steel sheeting , any gauge , thickness roof coverings complete all as specified and directed by Engr-in-Charge. |
| 2 | S&F coloured pre-painted galvalume aluminium zinc coating AZ150 ased corrugated steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including necessary washers etc all as per manufactures instruction complete all as specified and directed. |
| 3 | S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs /wall cladding etc with grade of zinc coating 275 complete all as specified and directed. |
| 5 | S&F 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 6 | Closing bolt holes etc in old/new corrugated sheets by sealing with one bitumen and one curved GI washer on either side and 6 MM GI bolts and nuts,all set in stiff lead all as specefied and directed. |
| 7 | Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge |
| 8 | S&F rolled mild steel work as in roof truss (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 9 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer, all as specified and directed. |
| 10 | M&L for one coat of synmthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified |
| 11 | M & L for Rendering 15 mm thick cement mortar (1:6) on fair faces of brick /stone masonary or concrete block wall surfaces, including taking down old plaster complete all as specified and directed. |
| 12 | M&L for preparation of new plastered surfaces by brooming or by steel wire brushing and applying two coats of cement base paint on walls omplete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. . |
| 14 | M&L Joint free coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade over and incl 10 mm rendering in CM 1:4 complete all as specifed and as dircted. |
| 15 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ractangular ) joint free tiles, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement.over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed cement to match complete all as specifed and as directed |
| 16 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ractangular ) joint free tiles, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement.over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed cement to match complete all as specifed and as directed |
| 17 | M&L machine cut kota stone slab flooring 18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 20mm thick screed bed or bedding layer of cement mortar 1:6, all as specified and directed by Engr -in- Charge. |
| 18 | Demolition of cement concrete of any description & in any position not otherwise specifically provided for (unreinforced), complete all as specified and directed. |
| 19 | M&L 50mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection , all as specified and directed by Engr -in-Charge. Please Enable Macros to View BoQ information |
