|
| 1 | Repair and maintenance works pertaining to tile work at C-type quarter and control room building at 132 kV substation, Damoh and Testing division office building, Sagar including construction of cable trench at 132 kV substation, Damoh. |
| 2 | 11.78.1.1 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Size 600X600 mm thickness 9-10 mm |
| 3 | 11.72.3 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colourand pattern over 50mm thick compacted bed of stone dust, compacting and proper embedding/ laying of inter locking paver blocks into the bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including locking edges in 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer'sspecifications and direction of Engineer-in- Charge. 60 mm thick C.C. paver block of M-30 grade |
| 4 | 11.49 Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 5 | 11.50 Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 6 | 11.36 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Note: - Deduction shall be made for not mirror polishing according to item no 11.43 ACDC Room |
| 7 | 11.79.1.1 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Size 600X600 mm thickness 9-10 mm |
| 8 | 11.38.2 \\"Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete...20 mm thick\\" ACDC ROOM |
| 9 | 15.2.2 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). |
| 10 | 9.1.2 \\"Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately) ..Sal wood \\" |
| 11 | 9.18.2 \\"Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter..30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.\\" |
| 12 | 4.1.2.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :With 40mm nominal size graded stone aggregate.M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate |
| 13 | 4.1.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :With 20mm nominal size graded stone aggregate.M 15 – Grade concrete |
| 14 | 5.16.6 Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 |
| 15 | 5.1.1 Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :M 20 Grade concrete |
| 16 | 5.9.2.1 Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness)including attached pilasters butteress plinth beams and string courses etc. :Upto plinth level. wall Outer side&wall inner side |
| 17 | 10.1 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all Angle 50x50x5 |
| 18 | 13.64 Painting with synthetic enamel pain of approved brand and manufacture, to give an even shade and colour. Two or more coats on new work (Angle 50x50x5) |
| 19 | 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for Foundation, footing, bases fo coloumns etc. for concrete upto plinth level : Base of cover slab |
| 20 | 10.22.1 Steel work welded in built up sections/framed work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. In stringers. Tread, landing etc. of starir cases including use of Chequred plates whereever required all complete 5 mm thick plate. |
| 21 | 19.4.1 Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) |
| 22 | 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 23 | 2.24 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 24 | Repair and maintenance works pertaining to tile work at Testing division office building, Sagar. 11.78.1.1 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Size 600X600 mm thickness 9-10 mm |
| 25 | 11.79.1.1 \\"Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours & shades, 1st quality/ premium quality in skirting, dado and wall lining laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting thejoints with white cement and matching pigments etc. complete..In light shade glossy/ rustic /stain finished..(a) Size 600X600 mm thickness 9-10 mm\\" |
| 26 | 15.2.2 \\"Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in.Charge...Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix).\\" |
| 27 | 6.5.2 \\"Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete...Cement mortar 1:6 (1 cement : 6 sand)\\" |
| 28 | 4.1.1.3 \\"Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :.With 20mm nominal size graded stone aggregate..M-15 - Grade concrete\\" |
| 29 | 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and underincluding cutting the patch inproper shape, raking out joints and preparing and plastering the surface of the walls completeincluding disposal of rubbish tothe dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). |
| 30 | 14.36 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Please Enable Macros to View BoQ information |
