|
| 1 | Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed by Engr-in-Charge. |
| 3 | Removing excavated materials (soil) n. exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 4 | M & L for sand cushioning to underground cable with clean dry river sand complete all as specified and directed by Engr-in-Charge. Note:- Punned thickness only shall be measured & Paid. |
| 5 | Replacement of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x 150x40mm , complete all as specified and directed by Engr in Charge. |
| 6 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 300 Sqmm 3.5 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge.Note :- Excavation and earth work shall be measured and paid under respective item. |
| 7 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 185 Sqmm 3.5 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge.Note :- Excavation and earth work shall be measured and paid under respective item. |
| 8 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 150 Sqmm 3.5 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge.Note :- Excavation and earth work shall be measured and paid under respective item. |
| 9 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 95 Sqmm 3.5 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge.Note :- Excavation and earth work shall be measured and paid under respective item. |
| 10 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 70 Sqmm 3.5 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge.Note :- Excavation and earth work shall be measured and paid under respective item. |
| 11 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 50 Sqmm 3.5 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge.Note :- Excavation and earth work shall be measured and paid under respective item. |
| 12 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 35 Sqmm 3.5 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge.Note :- Excavation and earth work shall be measured and paid under respective item. |
| 13 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 25 Sqmm 3.5 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge.Note :- Excavation and earth work shall be measured and paid under respective item. |
| 14 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 16 Sqmm 4 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge. |
| 15 | Supply, laying and testing in trenches or passing through pipe or fixed on surface e XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of 10 Sqmm 4 core size, including taking out old unserviceable cable, complete all as specified and directed by Engr in Charge.Note :- Excavation and earth work shall be measured and paid under respective item. |
| 16 | M& L in replacement of GI Pipe light grade for cable protecton in road crossing and making good surface road to filling with PCC of size 80 mm dia complete all as specified and directed by Engr in Charge. |
| 17 | M& L in replacement of GI Pipe light grade for cable protecton in road crossing and making good surface road to filling with PCC of size 50 mm dia complete all as specified and directed by Engr in Charge. |
| 18 | M& L in replacement of GI Pipe light grade for cable protecton in road crossing and making good surface road to filling with PCC of size 40 mm dia complete all as specified and directed by Engr in Charge. |
| 19 | Supply Installation , Commissioning ,in replacement of of factory made cubical out door LT panel pedestal mounting type Confirming to IP-54 , CPRI approved fabricated from 3.15 mm thick CRCA sheet powder coated, Aluminium bus bar 300 Amp rating capacity, Three Phase and 150 Amp for Neutral with minimum clearance 75 mm , all as per IS shall be available inside for easy access and working condition, Markings should be made to identify incoming and outgoing circuits and earthing bolts at two points. inside panel for housing the following accessories :-(I) MCCB 4 pole 350 Amp 36 kA-01 No, (ii) MCCB 4 pole 100 Amp 25 kA, - 01 No.(iii) MCCB 4 pole 63 Amp 25 kA,-04 Nos.(iv) LED Voltmeter, -01 No (v) LED Ammeter - 1 No (vi) Voltmeter Selector Switch - 01 No(vii)Ammeter Selector Switch-01 No(viii) CT 250/5, 5VA, Matrix tape wound ring type bar primary(ix) LED Indicating lamps Red/ Yellow, L&T(x) LED Indicating lamps Blue, L&T(xi) MCB SPN 20A, 10 kA, 'C' curve - 01 No.(xii) Aluminium Bus bar 300 Amp 4 strip. (xiii) Changeover switch 4 pole 350 Amps -01 No |
| 20 | Supply Installation , Commissioning ,in replacement of of factory made cubical out door LT panel pedestal mounting type Confirming to IP-54 , CPRI approved fabricated from 3.15 mm thick CRCA sheet powder coated, Aluminium bus bar 300 Amp rating capacity, Three Phase and 150 Amp for Neutral with minimum clearance 75 mm , all as per IS shall be available inside for easy access and working condition, Markings should be made to identify incoming and outgoing circuits and earthing bolts at two points. inside panel for housing the following accessories :-(I) MCCB 4 pole 200 Amp 36 kA 200 Amps -01 No (ii) MCCB 4 pole 100 Amp 25 kA 01 No.(iii) MCCB 4 pole 63 Amp 25 kA -03 Nos.(iv) LED Voltmeter-01 No (v) LED Ammeter - 01 No (vi) Voltmeter Selector Switch - 01 No(vii)Ammeter Selector Switch -01 No(viii) CT 250/5, 5VA, Matrix tape wound ring type bar primary(ix) LED Indicating lamps Red/ Yellow, L&T(x) LED Indicating lamps Blue, L&T(xi) MCB SPN 20A, 10 kA, 'C' curve - 01 No.(xii) Aluminium Bus bar 300 Amp 4 strip.(xiii) Changeover switch 4 pole 200 Amps -01 No |
| 21 | Supply & Fix in replacement of twin core flat or round sheathed stranded copper conductor cable 1.5 Sqmm all as specified and directed by Engr-in-Charge. |
| 22 | Supply and fixing in replacement of junction box made of mild steel 1.6 mm thick of size 250mmx200mmx105mm incl 4 Nos aluminium bus bar of 2 mm thick duly fitted on the suitable insulator with fixing with 35x6mm ms flate iron with nut bolt and washer and incl one MCB SP 6 amp with rail fitted in ms box incl suitable size cable hole,gland duly painted with one coat of aluminium paint over a coat of red oxide etc complete all as specified and directed by Engr-in-Charge. |
| 23 | Supply and fixing in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. and all as specified and directed by Engr-In-Charge. |
| 24 | Supply & Fixing in replacement Pole Street light bracket fabricated out of GI Tubing light grade 40/50 mm bore bend to the shape as directed and not less than length 1.0 Mtr complete with Mounting MS Clamp of Flat Iron size 40x5mm of suitable length of 02 Nos incl nut bolts etc of suitable size complete all as specified and directed by Engineer-In-Charge. |
| 25 | M & L for installing, testing and commissioning in replacement of factry made bus bar chanber with 160 Amps comprising of 4 Nos aluminium bus bar of 200 Amp rating supported on insulator and enclosed with sheet steel enclosure out door type made out of 3.15 mm thick CRCA sheet, with top edge tappered, dust and vermin proof , having locking arrangement at front and opening arrangement from front & rear both including fixing arrangement on pole/gorunting in floor, with colour coded FRP with compression cable glands for entry & exit of cables, powder coated all specified and directed by Engr-in-Charge. |
| 26 | M & L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6mm thick buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the earth plate not less than 1.5 meters deep below normal ground level, connected with and including galvanised iron strip of size 25 x 4mm connected to main test point as directed as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 40mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size for lifting of cover slab, charcoal and salt in alternate layers including necessary excavation and earth work in soft/loose soil all as shown in Electric plate No 3 of SSR Part-I and testing on completion complete all as specified and directed by Engr-in-Charge. |
| 27 | Supply, installation and commissioning hi - wall split units indoor/ outdoor complete with inverter dust filter antibacterial coating , air purifier with energy efficiency 5 star rating cordless remote control unit and with card copper pipe , rotary type compressor, copper condensor coil AC 230 V 50 HZ 1 Year comprehensive warranty with cooling and heating function of capacity 2 TR complete all as specified and directed . |
| 28 | Supply, installation, testing and commissioning automatic voltage regulator (voltage stabliser) of 5 KVA Capacity suitable for working on 230 volts 50 Hz AC complete all as specified and directed .. |
| 29 | S&F Havells DBOXX Protected Socket AC Box with SP MCB switch socket combination 25 Amp flush type universal with plug top complete all as directed and specified. |
| 30 | M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x4.0 sq. mm + 1x 4 sq. mm earth wire complete all as specified and directed. |
| 31 | Supply and fix air conditioner iron stand suitable for 2 ton AC with anchor fastner complete all as specified and directed. |
| 32 | Supply and fix in replacement of PVC drain pipe 15 mm dia with fittings and fixing accessories complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used Tripple pole & neutral 240 Volts 4 Ways complete all as specified and directed. |
| 34 | Supply and fix in replacement of MCB TPN 63 Amp 240 Volts AC ISI marked complete all as specified and directed |
| 35 | Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts AC ISI marked complete all as specified and directed. |
| 36 | Supply and fix soft copper tube outer dia 1/2 inch complete all as specified and directed by Engr-in-Charge. |
| 37 | Deduct Schedule of Credit of Rs (-) 58265.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information |
