|
| 1 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 2 | M&L for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and directed by Engr-in-Charge |
| 3 | M&L pre-cast cement concrete (20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 Complete all as specified and directed by Engr-in-Charge |
| 4 | Returning,filling in ,including spreading,levelling ,watering and well ramming in layers not exe 25cm in hard/dense soil Complete all as specified and directed by Engr-in-Charge |
| 5 | Removing excavated material n, exe 50m and depositing where directedat a level n, exe 1.5 m above the starting poit Complete all as specified and directed by Engr-in-Charge |
| 6 | M&L Hardcore with boken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 0.15 cm thick, water and rolled /rammed to a true surface Complete all as specified and directed by Engr-in-Charge |
| 7 | M&L PCC 1:4:8 type D-2 (using 20mm graded stone agg) 100 mm thick sub base of floor etc Complete all as specified and directed by Engr-in-Charge |
| 8 | M&L Non-Skid ceramic Coloured Tiles 7 to 8 mm thick(squre/rectanglar) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:6 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, Complete all as specified and directed by Engr-in-Charge |
| 9 | M&L for (350 x250mm) x 7 mm / 450mm x 350mm x 7mm glazed ceramic tiles on vetical surfaces set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck backing coat bed below tile for dado/skirting CM 1:4, complete all as specified and directed by Engr-in-Charge |
| 10 | M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 Complete all as specified and directed by Engr-in-Charge |
| 11 | M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 Complete all as specified and directed by Engr-in-Charge |
| 12 | M&L for preperation of new plastered surface and apply two coats of cement base paint over a coat of primer Complete all as specified and directed by Engr-in-Charge |
| 13 | M&L for preperation of new plastered surface and apply two coats of oil bound distemper over a coat of primer Complete all as specified and directed by Engr-in-Charge |
| 14 | Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection including making proper joints with bitumen mastic with sand as per specification at an interval of 3m Complete all as specified and directed by Engr-in-Charge |
| 15 | S&F bevelled edge mirror in any size 6 mm thick fixed to wall or tile surface with stainless steel spacer, size and shape as approved by GE complete all as specified and directed by Engr-in-Charge. |
| 16 | S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed Complete all as specified and directed by Engr-in-Charge |
| 17 | S & F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical, with closed top), hoisted and fixed in position all as specified in SSR Part I Complete all as specified and directed by Engr-in-Charge |
| 18 | S&F in 15 mm bore pillar tap fancy type cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe Complete all as specified and directed by Engr-in-Charge |
| 19 | S & F in fancy type 15 mm bore Stop valves, chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-Charge |
| 20 | S & F Vitreous china wash basin white flat back size 550 x 400 mm including including CI brackets of irosn 65 x 65 x 6mm embeded in PCC block with PCC 1:2:4 type B-1 & CP grating with holes fixed complete all as specified and directed by Engr-in-Charge |
| 21 | S&F 10 ltrs capacity incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified and directed by Engr-in-Charge |
| 22 | S&F PVC connection 15mm bore with ptmt nuts of length 450mm complete all as specified and directed by Engr-in-Charge |
| 23 | S&F viterous China squatting pan or Orissa patten 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with p.c.c type B-I 1:2:4 , using 20 mm graded crushed stone aggregate. |
| 24 | S&F Vitreous China Urinal full stall type white (excluding flushing cistern flush pipe and wast pipe) Vitreous China Urinals bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe, urinal spreader etc complete all as specified and directed by Engr-in-Charge |
| 25 | S&F 20 mm bore bib taps long or short body fancey type chromium plated with capstan head chromium plated screwed down screwed for iron pipe or brass ferrule. (Minm wt 350 Gms) complete all as specified and directed by Engr-in-Charge |
| 26 | S&F Towel rail with accessories set complete all as specified and as directed complete all as specified and directed by Engr-in-Charge |
| 27 | S&F PVC waste pipe 32mm bore with cup and washers complete on new or old locations complete all as specified and directed by Engr-in-Charge |
| 28 | S&F 20mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge |
| 29 | M&L sheet glass 4.80 mm thick ordinalry quality and glazing with aluminium beeds in square not exc 0.50 sqm in each pane complete all as specified and directed by Engr-in-Charge |
| 30 | S&F chromium plated soap dish any type fixed to plugs with brass screws complete all as specified and directed by Engr-in-Charge |
| 31 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge |
| 32 | S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and directed by Engr-in-Charge |
| 33 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge |
| 34 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed by Engr-in-Charge |
| 35 | S & F CP floor gratings 125 mm dia all complete all as specified and directed by Engr-in-Charge |
| 36 | S&F PPR 25 MM Gate Valve (Brass insert) as per requirement of the site complete all as specified and directed by Engr-in-Charge |
| 37 | S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engr-in-Charge |
| 38 | S&F for 30 mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats complete all as specified and directed by Engr-in-Charge |
| 39 | S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 40 | S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, cleats, MS Flat, MS plate, rivetting etc n.exc 10 kg each brackets, conforming to FE 290 Gde E-165 complete all as specified and directed by Engr-in-Charge |
| 41 | M & L for two coat of synthetic enamel paint over one coat of red oxide priming including preperation of new steel surfaces over 10 cm width or grith not otherwise described complete all as specified and directed by Engr-in-Charge |
| 42 | M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge |
| 43 | S & F gypsum ceiling board 8 to 9 mm thick in 600 x 600 mm pannel designer ceiling tiles laminated with white colour PVC film on the face side and a metalised polyster film on the back side, conforming to IS-14862 type B category three including suspended false ceiling using E-grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm to be placed in the grid suspended by 4mm GI wire hanger to be fixed as per site requirement including taking down of old false ceiling complete all as specified and directed by Engr-in-Charge |
| 44 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge |
| 45 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge |
| 46 | S & F of 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed by Engr-in-Charge |
| 47 | S & F of 75mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed by Engr-in-Charge |
| 48 | S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge |
| 49 | S&f 110 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge |
| 50 | S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge |
| 51 | S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge |
| 52 | S & F 75MM PVC Nahani trap, setting and jointing with solvent cement and fixed in Cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge |
| 53 | M&L 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge |
| 54 | M & L for DWCPE (SN-8) 200 MM dia pipe laid on 150mm thick bed with excavating in hard/dense soil including manholes/ drop manhole of standard size made of block masonary/RCC/Precast RCC with SFRC ventilating cover any frame, including all items and activities to execute and make sewar line functionm (Depth 0.7m - 1.65m) |
| 55 | M & L for LLDPE septic tank for 20 User convention type designed to carry sewage and sullage water, excavating in hard/desne soil, PCC 1:4:8 below foundation, Vent shaft, connection etc complete |
| 56 | M&L for soakage well of 1.80 mtr dia having min 3.00 mtr height of 380 mm thick random rubble uncoursed stone masonary wall in CM 1:6 with 150 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) below stone masonary at bottom and RCC slab using nominal mix M-25 with reinforcement 10 mm dia bars @ 150 mm c/c bothways cranked at 1/4 th of the span including arrangenment for manhole opening and manhole cover, inlet for 100/150 mm dia pipe.Note :- The rate includes excavation in hard/dense soil and construction of soakage well as per drawing connection of inlet pipe, 100 mm dia PVC vent pipe with cowl, returning, filling and removing of surplus soil to a distance exc 50 mtr but not exc 100 mtr from site for any issues regarding drawing decision of Engr-in-Charge shall be final during execution. |
| 57 | M&L Non-Skid ceramic Coloured Tiles 7 to 8 mm thick(squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:6 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, Complete all as specified and directed. |
| 58 | S & F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical, with closed top), hoisted and fixed in position all as specified in SSR Part I Complete all as specified and directed. |
| 59 | S & F Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 60 | S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 61 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 62 | S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.)etc. complete all as specified and directed . |
| 63 | S&F rolled section as in main and cross beams ,hip and jack rafters , purelins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe -410 Gde E-250 |
| 64 | M&L for Cement concerete bed to drain pipes incl packing under haunching against the sides of pipes after they are laid tested in 1:4: 8 type D-2 using 40 mm graded stone aggregate of bore of pipe upto 200mm complete all as specified and directed by Engr-in-Charge |
| 65 | M&L for Type B-1 1:2:4 (20mm grade aggregate )Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs set in mortar 1:6 including necessary formwork and in shelves complete all as specified and directed by Engr-in-Charge |
| 66 | Mild steel TMT bars 8-10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
| 67 | Mild steel TMT bars 8-10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
