|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR 2.8 |
| 2 | All kinds of soil DSR 2.8.1 |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 4 | All kinds of soil DSR 2.10.1 |
| 5 | Pipes, cables etc, not exceeding 80 mm dia. DSR 2.10.1.1 |
| 6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre DSR 2.10.1.2 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : DSR 4.1 |
| 8 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) DSR 4.1.4 |
| 9 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) DSR 4.1.10 |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR 6.1 |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.1.2 |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in : DSR 6.4 |
| 13 | Cement mortar 1:6 (1 cement : 6 coarse sand DSR 6.4.2 |
| 14 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. DSR 8.2 |
| 15 | Granite of any colour and shade DSR 8.2.2 |
| 16 | Area of slab over 0.50 sqm DSR 8.2.2.2 |
| 17 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. DSR 8.5 |
| 18 | Providing and laying Ceramic glazed wall tiles of size 300 x 600 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. DSR 8.31 |
| 19 | Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent. DSR 9.96 |
| 20 | 250x16 mm DSR 9.96.2 |
| 21 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete DSR 9.97 |
| 22 | 200x10 mm DSR 9.97.2 |
| 23 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 9.100 |
| 24 | 125 mm DSR 9.100.1 |
| 25 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: DSR 10.14 |
| 26 | Profile B DSR 10.14.1 |
| 27 | Fixing with adjustable lugs with split end tail to each jamb DSR 10.14.1.1 |
| 28 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. DSR 11.56 |
| 29 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red DSR 11.56.2 |
| 30 | 12 mm cement plaster of mix : DSR 13.4 |
| 31 | 1:4 (1 cement: 4 coarse sand) DSR 13.4.1 |
| 32 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 13.88 |
| 33 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. DSR 13.81.1 |
| 34 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: DSR 14.5 |
| 35 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 14.5.1 |
| 36 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. DSR 15.2 |
| 37 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) DSR 15.2.2 |
| 38 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : DSR 15.12 |
| 39 | Of area 3 sq. metres and below DSR 15.12.1 |
| 40 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR 15.25 |
| 41 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved DSR 15.60 |
| 42 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 43 | W.C. pan with ISI marked white solid plastic seat and lid DSR 17.3.1 |
| 44 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : DSR 17.13 |
| 45 | Orissa pattern W.C. pan of size 580x440 mm DSR 17.13.2 |
| 46 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. DSR 17.19 |
| 47 | 10 litre (full flush) capacity-white DSR 17.19.1 |
| 48 | Providing and fixing 8 mm dia C.P. Jet with flexible tube upto 1 metre long with triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A |
| 49 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete DSR 17.28 |
| 50 | Flexible pipe DSR 17.28.2 |
| 51 | 32 mm dia DSR 17.28.2.1 |
| 52 | Providing and fixing toilet paper holder : DSR 17.34 |
| 53 | C.P. brass DSR 17.34.1 |
| 54 | Providing and fixing soil, waste and vent pipes DSR 17.35 |
| 55 | 100 mm dia DSR 17.35.1 |
| 56 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 DSR 17.35.1.2 |
| 57 | 75mm dia DSR 17.35.2 |
| 58 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 DSR 17.35.2.2 |
| 59 | Providing and fixing heel rest sanitary bend DSR 17.40 |
| 60 | 100 mm dia DR 17.40.1 |
| 61 | Sand cast iron S&S as per IS - 3989 DSR 17.40.1.2 |
| 62 | Providing and fixing collar : DSR 17.57 |
| 63 | 100 mm DSR 17.57.1 |
| 64 | Sand cast iron S&S as per IS - 3989 DSR 17.57.1.2 |
| 65 | 75mm DR 17.57.2 |
| 66 | Sand cast iron S&S as per IS - 3989 DR 17.52.2.2 |
| 67 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 68 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 69 | Sand cast iron S&S as per IS - 3989 DSR 17.60.2.1 |
| 70 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc DSR 18.10 |
| 71 | 20 mm dia nominal bore DSR 18.10.2 |
| 72 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : DSR 18.11 |
| 73 | 15 mm dia nominal bore DSR 18.11.1 |
| 74 | 20 mm dia nominal bore DSR 18.11.2 |
| 75 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 76 | 20 mm nominal bore DR 18.17.1A |
| 77 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 |
| 78 | 20 mm dia nominal bore DSR 18.18.2 |
| 79 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 80 | 30 cm length DSR 18.21.1 |
| 81 | 15 mm nominal bore DSR 18.21.1.1 |
| 82 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 83 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 |
| 84 | 15 mm nominal bore DSR 18.49.1 |
| 85 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 18.53 |
| 86 | 15mm nominal bore DSR 18.53.1 |
| 87 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. DSR 18.53A |
| 88 | Cutting holes up to 30x30 cm in walls including making good the same DSR 18.76 |
| 89 | With common burnt clay F.P.S. (non modular) brick DSR 18.76.1 |
| 90 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. DSR 18.77 |
| 91 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : DSR 19.1 |
| 92 | 150 mm diameter DSR 19.1.2 |
| 93 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : DSR 19.2 |
| 94 | 150 mm diameter S.W. pipe DSR 19.2.2 |
| 95 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: DSR 19.4 |
| 96 | 100x100 mm size P type DSR 19.4.1 |
| 97 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.4.1.1 |
| 98 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: DSR 19.30 |
| 99 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : DSR 19.30.3 |
| 100 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.30.3.1 |
| 101 | Providing and fixing Tank Nipple complete in all respect |
| 102 | Providing and fixing of Chinaware Half stall Urinal with fittings, standard size C.P. brass flush pipe, spreaders and clamps all in C.P. brass complete in all respect Cat No. S4020112 Make M-cera size 375x390x590mm or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 103 | Construction of curb with CC 1: 2: 4 along with upto 1.00 depth for made it proof water including cost of sand , bajri complete in all respect |
| 104 | Providing and fixing ISI Marked water proof 30 mm thick flush door shutters of pine frame seasoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant , eco friendly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS: 848;complete in all respect. |
| 105 | Providing and fixing of Soap Tray made of CP Brass/SS/ABS Plastic including glass bowl of approved make Kerovit, Cera, Jal and ESSCO |
| 106 | Dismantling of floor tiles and wall tiles complete in all respect. |
| 107 | Providing and fixing of Door Closure complete in all respect |
| 108 | Providing and fixing of drip seal joints to sand cast iron/centrifugally cas (spun) iron pipes and fittings of diameter |
| 109 | 100 mm dia |
| 110 | 75 mm dia |
| 111 | Providing and fixing of C P Brass Pressmate Auto Close the Pillar Cock Complete in all respect make As per appsoved by EIC Make Jaquar PRS-031 Equiavalent in the same price of AOR |
| 112 | Providing & Fixing oval shape Wash Hand Basin Size 560 x 470 mm x 190mm Make Cera model ) complete with CP Waste or equivalent in the same range of AOR |
| 113 | Providing and fixing C.P. brass single lever basin mixer without popup complete in all respect Make Jaquar Opal or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 114 | Providing and fixing of Chinaware One Piece Floor Mounted European Type Water Closet with all other fittings including EWC, Seat Cover and Twin flush fittings etc complete.MCERA-CRUSE/Campbell Deluxe or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 115 | Providing and fixing Water Heaters Volume 25 Ltr. Approved Make Bajaj,Cera,Racold Vertical ( Manual) Complete in all respect of approved make or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 116 | Providing & fixing IRC encloser jali of mesh size 40 mm x 40 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangeent all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as desired by EIC complete in all respect. |
| 117 | Providing and fixing of C.P/SS long 32mm bend |
| 118 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) 100 mm dia, of approved make |
| 119 | Providing and fixing HCI P-Trap. Complete in all respect |
| 120 | Providing and fixing chinaware urinal partition complete in all respect. of approved make |
| 121 | Providing , Installing, Testing, Commissoing of mono block pumping 2 HP set of follwing para metre including starter piping connections & other allied works complete in all respect. Of make Kirlosker/ ABB/ Crompton graves.Head 30Mtr Discharge 1.97 LPS RPM 2830 of approved make |
| 122 | Providing and fixing of 3 core 2.5 sq.mm Multicore flexible cable PVC Insulated and Sheathed with Bare Copper Conductor as per IS 694 marked complete including making connection to the satisfaction of EIC Make : Havells, Polycab, Finolex or as per approved make list |
| 123 | Providing and installation of Elect. Control Panel with star delta connection suitable for operation of 2 HP submersible motor made out of MS base compring of contract plat on off Switch complete in all respect as per site requirement. |
| 124 | Manufacturing, Supplying and fixing of Rain Shelter for Pneumatic Pump / Monoblock Pump made from MS Angle covered with Fibre Sheet including grouting complete to the satisfaction of EIC |
| 125 | For Boosting Pump |
| 126 | Providing and fixing C.P. Push Cock complete in all respect |
| 127 | Providing and fixing of C.P. cup heavy duty of approved make |
| 128 | Providing and fixing of looking glass with PVC beeding 1/4\\" with plastic hard board complete in all respect of approved make Please Enable Macros to View BoQ information |
