|
| 1 | Assembling of a 3000 pump motor set at Phularitand feeder breaker premises by fitting of rotating shaft, impeller, long bush, check-nut & housing complete jobs |
| 2 | Transporting of 01 set of Pontoon (04 Small box & 02 big box) from feeder breaker to main water sump |
| 3 | Assembling & installation the Pontoon on the sump |
| 4 | Transporting of 3000GPM Pump motor set with baseplate from feeder breaker to main water sump |
| 5 | Installation of the Pump, Motor & baseplate on the pontoon with proper alignment including fitting of coupling belt & greasing packing of the pump |
| 6 | Dismantling, transporting & fitting of suction of the pump |
| 7 | Dismantling, transporting & Fitting of 10\\"dia Nipple, 10\\"dia M.3. Bend, 10\\"dia short piece in the delivery side of the Pump |
| 8 | Dismantling, transporting, laying & jointing of 10\\"dia M.S. Pipe in the delivery of 3000GEM Pump 70 No. x20=1400 Ft |
| 9 | Dismantling, transporting, laying s jointing of 8 't dia M.S. Pipe in the delivery of 3000GPM Pump 85Nos. x20-1700ft |
| 10 | Vertically laying & jointing of 8\\"dia 100 M.5. Pipe in the proposed range. 08headx06shift-48head |
| 11 | Dismant!ing, transporting & fitting of 10 dia hose for jointing of delivery of 3000GPM Pump |
| 12 | Dismantling, transporting & fitting of sluice valve & N.R. valve |
| 13 | PVC cable laying, hanging & shifting from pole to starter & starter to the motor in the pump |
| 14 | Providing of bolt & nut with washer |
| 15 | Fabrication & fitting of a matching piece of 10\\"dia M.S. pipe in the delivery |
| 16 | Fabrication & making of 10'dia M. bend |
| 17 | Fabrication & making of 10\\"dia Taper pipe |
| 18 | Fabrication & making of 8\\"dia M.5. band. |
| 19 | Fabrication & making of 8\\"dia Taper pipe |
| 20 | Cutting of rubber joints from conveyor belt |
| 21 | Alignment of pump motor set & commissioning the pump |
| 22 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
