Tender For Maintenance And Repair To The Bituminous Road Over Jalpaiguri Town Protective Embankment From Balapara More To Jubilee Park For A Length Of 650.0M In Block Jalpaiguri Sadar, P.S- Kotwali, Dist- Jalpaiguri. 3Rd Call, Jalpaiguri-West Bengal
TDR : 55366070
Tender Notice
BOQ
5 Days Left
Jalpaiguri
West Bengal
Tender For maintenance and repair To The Bituminous Road Over Jalpaiguri Town Protective Embankment From Balapara More To Jubilee Park For A Length Of 650.0M In Block Jalpaiguri Sadar, P.S- Kotwali, Dist- Jalpaiguri. 3Rd Call
Name of Work:- M/R to the Bituminous Road over Jalpaiguri Town Protective Embankment from Balapara More to Jubilee Park for a length of 650.0m in Block Jalpaiguri Sadar, P.S- Kotwali, Dist- Jalpaiguri. 3rd call
Sl. No.
Item Description
1
Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(i) On Bituminous Surface(Using Bitumen Emulsion at the rate of 0.20 to 0.30 kg per sqm.)
2
Providing and laying bituminous macadam with Hot Mix Plant using approved crushed aggregates of specified grading as per Table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature with paver finisher to the required grade, level and alignment and rolled with suitable power roller for break down, inter-mediate and finished rolling as per specification to achieve the desired - compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per Clause 504 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).B. For Grading 2(19 mm nominal size, 50-75 mm thick.)(iii) Using Drum mix Type HMP of minimum capacity40-60 TPH.
3
Providing & laying Semi-dense Bituminous Concrete (SDBC) as wearing coarse by Hot Mix Plant, using coarse aggregates, fine aggregates, filler materials and binder of required specification and grading as per approved job mix formula, over thoroughly cleaned surface coated with tack coat, including screening, cleaning of aggregates, mixing the components as per approved Job Mix Formula with hot binder, carrying the mixture by tipper truck or any other approved suitable arrangements, laying the mixture uniformly, maintaining the specified laying temperature, thorough rolling with power roller with necessary hand packing and pinning to give an uniform surface to achieve the desired density of at least 98% of that of Laboratory Marshall specimen, including the cost and carriage of aggregates, filler and binder, heating the binder, preheating the aggregates, and filler to the specified temperature, including the hire charges of Hot Mix Plant and other machineries, pay of operators, cost of fuel andlubricants and all other incidental charges complete.B. For Grading 2(10 mm nominal size, 25 mm thick.)Using Pakur Variety Agg(iii) Using Drum mix Type HMP of minimum capacity 40-60 TPH.
4
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous SurfaceProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform andfree from streaks and holes complete as per Clause 803 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
