|
| 1 | Surface excavation n exc 30 cm deep & avg 15 cm and getting out in hard / dense soil complete all as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed. |
| 3 | M & L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 4 | M&L for hard core of broken stone or boulder, gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surfaces complete all as specified and directed. |
| 5 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in foundation, footing, mass concrete, foundation beam, plinth beam and base for column complete all as specified and directed. |
| 6 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 7 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 8 | S&F TMT bars 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 9 | M&L for 100 mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) as in sub base of floor finished the surface fair and even to receive subsequent layer complete all as specified and directed. |
| 10 | M&L chequered designed cement concrete tiles of size 300mm x 300 mm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. |
| 11 | M & L for rendering 15 mm thick cement plastering on wall surfaces in two layers (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 12 | Supply only liquid water proofing compound complete all as specified and directed. |
| 13 | M&L for preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as ecommended by the manufacturer all as specified and as directed (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ). |
| 14 | M & L for rendering 10 mm thick cement plastering on wall surfaces in cement mortar 1:6 on other than fair face of brick-work or concrete surface and finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 15 | M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 16 | Returning, filling in incl spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified & directed. |
| 17 | Removing excavated material to a distance exc 50 mtr but n. exc 100m and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified & directed. |
| 18 | S&F rolled mild steel as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming toFe-410 W(Gde E-250) quality B complete all as specified and directed. |
| 19 | S & F rolled mild plates (plain or chequered) channels, square cut or notched, forming holes with riveted, bolted or welded attachment confirming to Fe 410W Gr E-250, quality-A complete all as specified and directed. |
| 20 | S&F Pre- painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall of mangalore pattern design, fixed with self tapping screws complete all as specified & directed. |
| 21 | S&F Pre- painted galvalume aluminum zinc coating Gl based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall of mangalore pattern design, fixed with self tapping screws as specified & directed. |
| 22 | S&F of UPVC soffit panel false ceiling (not less than 1mm thickness) sizes of 340mm x 2700mm / 300mm x 2500mm, durable and resistant to moisture, water and borer-fungus-termite attack. Panels to be installed with GI / Aluminum sections of suitable gauge & size according to site conditions. Panels fixed using with suitable trims for edge profiles and for connecting profiles. Panels must be maintenece free, rust proof and are 100% water proof complete all as specified and directed.Note: (a) Colour and pattern or false ceiling boards to be approved by GE.(b) Gl frame work will be measured and paid separately. |
| 23 | S&F Gl frame work of seamless ceiling comprising of GI Perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with Gl cleats and steel expansion fastners with and incl ceiling section (not exc 1.2m length) of 0.55mm thick having kurled web of 50mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia Gl adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat 40x3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long complete all as specified and as directed. |
| 24 | Use & waste for flat formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits if any of foundations and plinth beams and similar work, etc, rough finished surfaces of concrete etc all as specified and directed |
| 25 | Use & waste for flat form work to sides of pillars, posts struts, piers columns and stanchions, square, rectangular or polygonal rough finished surfaces of concrete etc all as specified and directed |
| 26 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 27 | S&F 110mm bore PVC (SWR) bends any type complete all as specified and directed. |
| 28 | S&F rolled mild steel work conforming to Fe 410 -W (Gde E- 250) quality A as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 29 | S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed. |
| 30 | S&F aluminium flats of suitable size as wind ties over roof sheet including self tapping screws complete all as specified and directed. |
| 31 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrom primer, complete all as specified and directed. |
| 32 | M&L for PCC pre-cast cement concrete block masonry with solid blocks using PCC 1:3:6 type C1 (with 20mm graded stone aggregate), exc. 10cm in width and setting in mortar1:6 complete all as specified and directed. |
| 33 | M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like including pointing in white cement (1:2) us ing marble dust with admixture of pigment to match with shade of granite. and including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.(Note: The colour / shade / design of granite shall be as approved by GE(I).) |
| 34 | S&F for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings, framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed. |
| 35 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 36 | M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:3 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 37 | S & F 4.0 mm thick sheet glass ordinary quantity and glazing with oil putty and glazing pin in squares not exceeding 0.50 sqm in each pane complete all as specified and directed |
| 38 | M&L for aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed over frame made up of aluminium hollow section of 25x50mm, 2.0mm thick, duly fixed to wall/ceiling with expansion fastener having panels not exceeding 1200x1200mm with necessary silicon filling, in approved pattern as in columns, beams, walls etc., complete all as specified and as directed.NOTE: Necessary scaffolding required for the work shall be deemed to include in the unit rate quoted. |
| 39 | S&F factory made uPVC white / colour sliding window, area not exceeding 2.00 sqm each, three track made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners including necessary Hardware like Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured lor payment purpose.) |
| 40 | S & F 35mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, gauges etc .as specified in SSR Part I, Section 8 clause 8.24 (a) complete all as specified and directed. |
| 41 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 42 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 43 | S & F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 44 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 45 | S&F 150 mm long Extruded Aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 46 | S & F vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 47 | S&F vitreous China wash hand basin with pedestal, white, flat back, size 550 x 4000 mm including brackets/rock bolt , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. |
| 48 | S & F 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. |
| 49 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 50 | S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.. |
| 51 | S&F 15 mm bore bib tap cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 52 | S&F 15 mm bore angle valve cast copper alloy, screwed down, high pressure, with fly nuts, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 53 | S & F in repairs 15 mm bore Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 54 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 55 | S&F 600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers. Complete all as specified and directed. |
| 56 | S&F 20 mm CPVC pipes SDR 11 & plain SDR 11 including all fittings on walls(conceled) & ceiling or laid in floors for internal water supply complete all as specified and directed. |
| 57 | S&F 25 mm CPVC pipes SDR 11 & plain SDR 11 including all fittings on walls(conceled) & ceiling or laid in floors for internal water supply complete all as specified and directed. |
| 58 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 59 | S&F 75 mm dia PVc (SWR) multi floor trap, plain with grating including pointing with solvent cement complete all as specified and directed. |
| 60 | S&F chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 61 | S&F soap dish, vitreous China white, approximate size 160x 160x90mm fixed to wall with plug and chromium plated brass screws complete all as specified and directed. |
| 62 | S&F tubular towel rail brass chromium plated 20mm dia, D type, 60cm longbetween flanges complete all as specified and directed. |
| 63 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed. |
| 64 | S&F 160 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed. |
| 65 | S&F 110mm bore PVC (SWR) bends any type complete all as specified and directed. |
| 66 | S & F Concrete bed to drain pipes of cement concrete PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) for 150 mm Internal diameter including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 67 | S&F 75mm bore PVC (SWR) bends with access door complete all as specified and directed. |
| 68 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 69 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 70 | S&F 75 mm dia PVc (SWR) floor trap, plain with grating including pointing with solvent cement complete all as specified and directed. |
| 71 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 including necessary formwork complete all as specified and directed. |
| 72 | M & L for glazed vitrefied Elite elevation tiles of suitable size of rustic look, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:3 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 73 | Supply, laying and testing of XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.00 sq mm 2.00 core shall be laid under trench or pipe or loop or shall be fixed on wall / pole including taking out old unserviceable cable complete all as specified and directed.(Note: Earthwork , excavation, sand coushioning, GI pipe etc. shall be measured and paid separately uinder relevant item) |
| 74 | Supply, laying and testing of XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.00 sq mm 4.00 core shall be laid under trench or pipe or loop or shall be fixed on wall / pole including taking out old unserviceable cable complete all as specified and directed.(Note: Earthwork , excavation, sand coushioning, GI pipe etc. shall be measured and paid separately uinder relevant item) |
| 75 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 76 | Removing excavated material to a distance n.exc 50 mtr and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified & directed. |
| 77 | M & L for sand cushioning under trenches as in cable protection complete all as specified and directe.(Note: Punned thickness shall measured for payment purpose) |
| 78 | M&L for Sub Class B bricks common burnt clay building bricks designation 75 Kg/Sqmm complete all as directed. |
| 79 | Supply and laying 40 MM bore dia GI tubes, light grade galvanised with all fittings laid in trenches etc for protection of cable including taking up / down old unserviceable pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
| 80 | Supply and laying 40 MM bore dia GI tubes, light grade galvanised with all fittings laid in trenches etc for protection of cable including taking up / down old unserviceable pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
