|
| 1 | M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces X in area not exc 400 sqm, exc 50mm and n.exc 100mm deep removing and depositing to low lying area all as specified |
| 2 | Laying and compacting 75mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and cxonsolidating to required gradient and camber complete all as specified and directred |
| 3 | M&L for premix bituminous, macadam with 4% binder (paving bitumen) laid/rolled Cum and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directred |
| 4 | M&L for preparing unsurfaced Wet Mix Macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc all as specified and directed by Engineer-in-Charge |
| 5 | M&L for preparing black top surfaces by brushing with wire brushes for removing X So caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc all as specified and directed by Engineer-in-Charge |
| 6 | M&L for applying evenly a priming/tack coat with bituminous primer using paving XS bitumen at Per 10 Kg/Sqm all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for applying evenly a priming/tack coat with bituminous primer using paving X S bitumen at Per 5 Kg/Sqm all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for Bituminous premix asphaltic semi dense concrete 40 mm consolidated X: thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient using paving bitumen any penetration complete all as specified and directed |
| 9 | Repair to potholes, any depth, not exc. 1.00 Sqm each cuding swing free dust and mud, or water, scoring sunken surfaces in roads, paths, els cutting around edges to at least 25 mm in depth, making good by applying tack coat Ki X putting in premised bituminous macadam well rammed and sealed with binder (paving bitumen VG-30) 9.00 Kg per 110 Sqm blinded with 0.09 cum of stone chippings 6.03mm size and again well rammed (including supoty of premixed macadam, binder and chippings), depth of potholes exceeding 30 mm complete al as specified and directed |
| 10 | Supply and foung cat eye solar reflective type of metal body alloy aof size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 fixed with and inol MS stud of suitable size as per manufactures instructions |
| 11 | Supply and fix solar cat eye aluminum alloy shail (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one Ni-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mod completed as per manufactures instructions etc. all as specified and directed |
| 12 | S & F Rubber road breaker made of superior industnal grade rubber durable and solid, anti slide surface with heavy duty load capacity 50 mm wide/75mm hump black and yellow including fixing nails/screws all as specified and directed |
| 13 | S&F outdoor convexmirror of 100cm (min) dia, polycarbonate lens, brim and back holding plates of fibre reinforced plastic having clear & definite mirror image, 130 degree of viewing angle of size 1000mm dia, provided on MS pipe 40 mm dia, 12 M long duly powder coated, embedded on PCC block 1.35 Type C-2 including necessary excavation and earthwork, complete as specified and as directed fixing at suitable height as directed |
| 14 | M&L for preparing bituminous roads Painting lines, dashes, arrows, letters, etc. or roads pavements and the like exc 10cm wide with road marking paint, white or golden yellow (for thermoplastic road/pavement marking approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete in all respect with 2.5 mm thick layer of marking and 250 gm/sqm glass beads consumed in per sqm ratio all as specified and directed Please Enable Macros to View BoQ information |
