|
| 1 | C.I.Pipe With Standard Thickness & Flange As per I.S.I. Specification machined From dia 4\\" To 12\\"(i) New Material Supply Basis |
| 2 | (ii) On Conversion Basis |
| 3 | C.I. Bend, Duck Foot Bend, Cross,Tee And Other Such Part All Size As per Drg.(i) New Material Supply Basis |
| 4 | (ii) On Conversion Basis |
| 5 | C.I.Drum, Rod,Bush, Bari,Idler Pully, Break Drum For Cane Unloader etc As per Drg.(i) New Material Supply Basis |
| 6 | (ii) On Conversion Basis |
| 7 | C.I.Coupling From 4\\"DIA To 10\\"DIA Plane/Flange Type(i) New Material Supply Basis |
| 8 | (ii) On Conversion Basis |
| 9 | C.I. Firing Frame,Door Side Chamber, Bagasse Rotary Chuts, Rotary Feeder Drum , Clit, Hanger, beam, gutka, Furnace Nozzle, Clam Etc. And Other Such Parts For LIPI/TAXMACO Boiler As per Different DRG.High Chrome Grade 25 , Casting & Machined Temp. Capacity 15000 C(i) New Material Supply Basis |
| 10 | (ii) On Conversion Basis |
| 11 | C.I. Clamp/ Hanger Clit Small Size for lippi Boiler no. 3 as per drg. BLR-79 High Chrome Grade 25 , Casting & Machined Temp. Capacity 15000 C |
| 12 | C.I Scapper Mixed With pig Iron And Having Standard hardness Dully machined as per Drg.no.MH-66 ( R)(i) New Material Supply Basis |
| 13 | (ii) On Conversion Basis |
| 14 | (iii) Grooving of C.I.Scrapper As per DRG. |
| 15 | Centrifused Casted C.I.Coupling For FMG Gear Of KCP Mill OD 1000 MM.PCD 815(18 Holes)9+9,With Machining Complete As per DRG.No.MH-93 |
| 16 | C.I.Motor Cover For Different Type Motor |
| 17 | Mill Setting Bolt & Nut For KCP Mill DRG.No.MH-106 |
| 18 | Mill Setting Bolt & Nut For TAXMACO Mill DRG.No.MH-38 |
| 19 | C.I.Worm And Worm Wheel For Crystilizer As per Drg.BH-39 ( R ) Machined |
| 20 | C.I.Worm And Worm Wheel For vertical Crystilizer No. 2 complete Set As per Drg. Machined |
| 21 | Eccentric Shaft And Eccentric For Hopper as per DRG.No.BH-60 |
| 22 | M.S.Shell For Under Feed Roller As per DRG.MH-95.Length 1525 MM.OD 750MM,Thickness 18MM |
| 23 | C.I. Muff Coupling For Cane Unloader As per DRG.No CU-25 |
| 24 | C.I.Gear For Magma Mixture As per DRG.No BH-137.OD 450mm,No.Of Teeth-51.Bore 70mm, Width 63mm |
| 25 | C.I.Brake Drum For S.D.Centrifugal Machine TAXMACO Make Duly Machined(i) As per DRG.No. BH 81/1 |
| 26 | (ii) As per DRG.No BH-81/2 |
| 27 | C.I.V-Belt Pully Of Cont.Centrifugal Machine Duly machined |
| 28 | C.I.Scale Seat For Juice Weighing Scale Duly Machined and Drilled as per DRG.No.MH-195 |
| 29 | ID Fan Pully (As per drawing NO. BL-R-128/2024-25) |
| 30 | ID Fan Motor Pully (As per drawing NO. BL-R-129/2024-25) |
| 31 | Boiler Grate Bar Material-Cont Iron. (As Per Sample/Drg.) |
| 32 | Boiler Furnace Manage Gap Bar. (Ap Per Sample/Drg.) CHIEF ENGINEER Please Enable Macros to View BoQ information |
