|
| 1 | Cane Carrier Drive shaft with 03 Nos Sprockets Length of Shaft- 4200mmShaft Size: Ø 280 at center & Ø 220 at bearingsMaterial of Shaft: 40C8, IS 1570Sprocket Teeth-16 NosSprocket pitch- 200mm Sprocket Hub Thickness- 200mmSprocket Thickness near teeth- 35mmSprocket Material- C.S, IS:2708, Gr llDrawing should be draw by bidder before supply from actual shaft installed in factory. |
| 2 | Rake Carrier Drive shaft with 02 Nos Sprockets Length of Shaft- 4000mmShaft Size: Ø 280 at center & Ø 220 at bearingsMaterial of Shaft: 45C8, IS 1570Sprocket Teeth-16 NosSprocket pitch- 229mmSprocket Hub Thickness- 220mmSprocket Thickness near teeth- 85mmSprocket Material- C.S, IS:2708, Gr llDrawing should be draw by bidder before supply from actual shaft installed in factory. |
| 3 | Inter Rake Carrier Drive shaft with 02 Nos Sprockets Length of Shaft- 3960mmShaft Size: Ø 225 at center & Ø 160 at bearingsMaterial of Shaft: 40C8, IS 1570Sprocket Teeth-16 NosSprocket pitch- 229mmSprocket Hub Thickness- 220mmSprocket Thickness near teeth- 85mmSprocket Material- C.S, IS:2708, Gr llDrawing should be draw by bidder before supply from actual shaft installed in factory. |
| 4 | RBC Conveyor Drive Head Pulley with through out shaftShaft Length-3500mmShell Size- Ø 630 x 2600mm face Width- 12mm ThickShell Material- IS 2062, Grade A, Shaft Material- EN-8Rolled and welded, M.S Construction with Keyed Shaft.12mm THK Rubber Lagging with diamond GrooveShaft Size: Ø 140 at center & Ø 125 at bearings |
| 5 | RBC Conveyor Tail End Pulley with through out shaftShaft Length-3200mmShell Size- Ø 500 x 2600mm face Width- 10mm ThickShell Material- IS 2062, Grade A, Shaft Material- EN-8Rolled and welded, M.S Construction with Keyed Shaft.10mm THK Rubber Lagging with diamond GrooveShaft Size: Ø 120 at center & Ø 110 at bearings |
| 6 | Surplus Bagasse Conveyor Tail End Pulley with through out shaftShaft Length-3200mmShell Size- Ø 500 x 2600mm face Width- 10mm ThickShell Material- IS 2062, Grade A, Shaft Material- EN-8Rolled and welded, M.S Construction with Keyed Shaft.10mm THK Rubber Lagging with diamond GrooveShaft Size: Ø 120 at center & Ø 110 at bearings |
| 7 | Belt Conveyor BC-01 drive Pulley with through out shaftShaft Length-2700mmShell Size- Ø 510 x 2000mm face Width- 10mm ThickShell Material- IS 2062, Grade A, Shaft Material- EN-8Rolled and welded, M.S Construction with Keyed Shaft.15mm THK Rubber Lagging with diamond GrooveShaft Size: Ø 140 at center & Ø 120 at bearings |
| 8 | Bagasse Elevator Drive shaft with 02 Nos Sprockets Length of Shaft- 3800mmShaft Size: Ø 190 at center Material of Shaft: 40C8, IS 1570Sprocket Teeth-16 NosSprocket pitch- 200mmSprocket Hub Thickness- 290mmSprocket Thickness near teeth- 35mmSprocket Material- C.S, IS:2708, Gr llDrawing should be draw by bidder before supply from actual shaft installed in factory. |
| 9 | Main Bagasse carrier Drive shaft with 02 Nos Sprockets Length of Shaft- 3800mmShaft Size: Ø 190 at center Material of Shaft: 40C8, IS 1570Sprocket Teeth-16 NosSprocket pitch- 200mmSprocket Hub Thickness- 290mmSprocket Thickness near teeth- 35mmSprocket Material- C.S, IS:2708, Gr llDrawing should be draw by bidder before supply from actual shaft installed in factory Please Enable Macros to View BoQ information |
