|
| 1 | M&L for Scarifying or picking graveled macadam or bituminous macadam surface in area n.exc 400 Sqm and depth exceeding 50mm and n.exc 100 mm deep and removing n.exc 50 mtr and stacking complete all as specified and directed. |
| 2 | M&L for 75 mm thick (compacted thickness) WBM with coarse stone aggregate of grading 2 (63 to 40mm) or Limestone, sand stone, Flint or Quartzite of grading 3 (50 to 20mm) spread, rolled and consolidated to gradient material and camber required with 8 to 12 tonne power roller complete all as specified and directed. |
| 3 | M&L for preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat of bitumnous primer at 10Kg per 10 Sqm using bitumen VG-10 complete all as specified and directed. |
| 4 | Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed by GE. |
| 5 | M&L for preparing old black top surface of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat @ 5 kg per 10 sq m with using paving bitumen VG-10 and providing bituminious premix asphaltic semi dense concrete (30mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of mechanical pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed. |
| 6 | M&L for premix bituminous macadam laid / rolled and compacted to required gradient and camber and (consolidated thickness 75mm or less) using 4% paving bitumen by weight or total mix complete all as specified and directed |
| 7 | M&L for thermo plastic center or edge line marking (reflective type) of 2.0 mm thick of uniform finishing with machine conforming to the required to BS 3262 (Part-I) 1989 read with MoRTH specification of 803 clause 4.2.1 and 4.2.2 on bituminous surface in white / yellow / Red colour and super imposed with glass slam beats conforming to BS 6088 and MoRTH specification 803 clause 4.3.3 including cleaning of surface by removing all dust, dirt, oil grease etc including removing of existing marking with spirit / kerosene / gas burner or mechanically on bituminous surface complete all as specified and directed by Engineer in charge. |
| 8 | S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions etc. all as specified and directed. Make Sinor/ Dark eye /3M/ road knight /Dension road sighn / greenlite |
| 9 | S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. Make Sinor/ Dark eye /3M/ road knight /Dension road sighn / greenlite |
| 10 | S & F in repair for Convex Mirror 1000mm dia made of PC material provided with suitable MS pipe post of 75mm dia medium grade with 3mtr long , duly powdered coated / painted as per site requirement, clear & definite mirror, image having 130 degree of viewing angle, unbreakable and stronger than glass, including excavation and PCC 1;2:4 using 20 mm graded aggregate (size of post holes = 450mm x 450mm x 600mm ) complete all as specified and directed. Make : Sinor / Dark Eye / 3M / Road Knight / Dension road Sighn / Greenlite |
| 11 | S & F for stainless steel boards of high intensity reflect i.e single side, sign boards made of hardened ACP sheet 2 mm thick POP riveted to stainless steel rectangular pipe of size 50 x 25 mm frame of size 900 x 1200 mm. frame supported with bolts over 60 mm round 3 mtr long stainless steel pipe of 16 guage with stainless bonded clamps. All stainless steel parts should be polished. Sign boards should be reflective on one side with wide HIP sheet and overlay film of any colour with computer cut letters, sign and border all as specified including excavation, PCC 1: 2:4 using 20mm graded aggregate (size of post hole shall be 450 x 450 x 600mm) and directed by Engineer-in-Charge two boards on single frame are fixed back to back. |
| 12 | Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil. |
| 13 | Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 14 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 15 | M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed. |
| 16 | M&L for ISI Mark 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed. Please Enable Macros to View BoQ information |
