|
| 1 | Earthwork in excavation by mechanical means(hydraulic excavator)/manual means in foundationpipeline trenches drain (not exceeding 1.5 m in widthor 10 sq.m. on plan) including dressing of sides andramming of bottoms, lift upto 1.5 m including gettingout the excavated soil and disposal of surplusexcavated soil as directed within a lead of 50 m. |
| 2 | All kinds of soil |
| 3 | Rubble packing with hard laterite stone underfloors including watering ramming andconsolidating etc. in pipeline trenches and otherfoundations complete. |
| 4 | Providing & laying cement concrete 1:3:6 (1cement: 3 coarse sand: 6 graded granitic or basalticstone aggrt. 20 mm. nominal size) excluding cost ofcentering, shuttering and finishing in: All kinds of soil |
| 5 | Centering & shuttering including Strutting, Propping & removal of forms for : |
| 6 | Foundations, Footings, Bases for columns |
| 7 | iii) Centering & shuttering including Strutting, Propping & removal of form work for:Columns, Piers, Pillars, Aburments, Posts andstruts (square rectangle polygon in plan) |
| 8 | iii) Centering & shuttering including Strutting, Propping & removal of form work for: Sides and Soffits of beams, Beam Haunchings,Cantilever, Girders, Bressumers and Lintels plinthbeams not exceeding 1m in depth |
| 9 | Providing and laying in position (1:11/2:3)Reinforced cement conrete excluding the cost ofcentering, shuttering, finishing and reinfrocement(1 cement: 1½ coarse sand:3 graded stone agg20mm nominal size) |
| 10 | a) All works upto plinth level |
| 11 | b) In walls (any thickness), including attachedpilasters, buttresses, plinth and string courses,fillets, columns, pillars, piers, abutments, posts andstructs etc. upto floor five level |
| 12 | c) In beams, suspended floors, roofs having slopeupto 15° landings, balconies, shelves, chajjas,lintels, bands, plain window sills, staircases uptofloor five level |
| 13 | Providing High yield strength steel reinforcementbar (HYSD)/TMT steel reinforcement bar fromsecondary producers (Confirming to IS 1786 of1986) for RCC work including bending, binding &placing in position in all the floors along with thefactory made precast concrete cover blocks ofspecified sizes whose compressive strength is notless than that of surrounding concrete in thestructural member. |
| 14 | Laterite masonry in neatly dressed stones of sizeas specified in cement mortar 1: 4 (1 cement : 4coarse sand) in foundation and basement. |
| 15 | Laterite masonry in neatly dressed stones of sizeas specified in cement mortar 1: 4 (1 cement : 4coarse sand) in foundation and basement.Extra for laterite masonry in all sizes insuperstructure from floor I level upto floor V level. |
| 16 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 17 | Steel work in single sections (SAIL, TATA. VIZAG &using electrodes of Ador or ES4B or Deh Secheronmake only) including cutting, hoisting fixing inposition and applying a priming coat of red leadpaint. |
| 18 | In R.S. joists, channels, angles, tees |
| 19 | Steel work in built up tubular (round, square orrectangular hollow tubes etc.) (Square HollowSection (SHS) IS4923 /Rectangular Hollow Section(RHS) IS4923/ Circular Hollow Section (CHS)IS1161 closed Structural Steel of (SAIL, TATA.VIZAG, JSW ,APOLLO Steel Ltd.) make (Min YeildStress 310 Mpa)) trusses etc., including cutting,hoisting, fixing in position and applying a primingcoat of approved steel primer, including weldingand bolted with special shaped washers etc.complete. |
| 20 | Providing and fixing Colouron Plus galvuliumroofing Sheets of 0.5mm thick double ribbedtrapezoidal profile coated 1080mm with coverwidth of 1020mm including all the accessories(JSW or equivalent make) but excluding the cost ofpurlins, rafters, trusses, flashings etc. complete asper the directions of the Engineer in charge. |
| 21 | Add for providing & fixing Flashings -[Corners,Ridges, valleys, gable end & Trims] (Girth upto610mm) including all the accessories complete asper the directions of the Engineer in charge. |
| 22 | Painting three or more coats with acryllic exteriorpaint of approved brand and manufacture (Such asDulex/ Asian Paints/ Sherwin Willians) includingapplying one coat of cement primer and one coat ofsurface treatment etc. complete. |
| 23 | Cuddappah stone slab machine cut flooring over20mm (average) thickness of cement mortar 1:4(1 cement : 4 coarse sand laid over and jointedwith grey cement slurry mixed with pigment tomatch the shade of the slab including rubbing andpolishing complete - 25 mm thick. |
| 24 | Providing and fixing prefabricated compound gateof G.I. pipes 40 – 50 mm dia (medium) with 12mmM.S. square bars of G.I. pipes grill work as perdrawing including providing & fixing lockingarrangements, pintals, hold fast embedded incement concrete 1:2:4 (1 cement: 2 coarse sand : 4granitic or basaltic aggreate 20mm nominal size)including applying priming coat with ready mixedred lead paint and painting 2 or more coats withsuperior ready mixed paint of approved brand andmanufacture in all shades as per directioncomplete. |
| 25 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using Please Enable Macros to View BoQ information |
