|
| 1 | PUNJAB WATER RESOURCES DEPARTMENT Talwara canal Division WRD Punjab Talwara Name of work:- Estimate For repair of Shah Nehar Barrage Gates. Name of Firm Sr.No Description Unit QUANTITY Rate (in figures) Rate (in Words) |
| 2 | Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respect and to entire satisfication of engineer incharge.120/44 |
| 3 | Providing & fixing in position flat/wedge seal ncluding preparation of surface complete in all respect and to entire satisfication of engineer incharge. 80mm diax12mm th |
| 4 | Providing of C.S.K. Head Screw. (As per sample) |
| 5 | Providing of G I Nut & Bolt of sorts.(As per sample) |
| 6 | Supply & installation of new steel wire rope in position including linking gate & hoist mechanism for smooth balance operation includingoiling & greasing complete in all respect as per specification 637 IScode 2266 & entire satisfication of engineer incharge- 20-30 mm dia. |
| 7 | Providing Spherical roller bearing 23124 Make NBC/fag or Equivalent. (NBC Bearing) |
| 8 | Providing of Oxygen Gas |
| 9 | Providing of Acetylene |
| 10 | Providing of M.S. Electrode 4 x 450 mm Advani/ D&H. |
| 11 | Providing of Cotton waste |
| 12 | Providing of Lead (Sikka) |
| 13 | Providing of Contactor 3 poles MNX12, 415V, AuxiliaryContact 1 NO, (Cat - CS94108DOOO) Make BCH/Essan/ L&T. |
| 14 | Providing of Cardium Compound. |
| 15 | Providing of Relay MN2(4.5 to 7.5 AMP) upto 500 V (CATNO-SS94141OOUO) Make BCH/ L&T/SIEMEN. |
| 16 | Providing of Add on block,MNX-A1 upto 415 V, AuxiliaryContact 2NO + 2NC (Cat No-CS94114OOOO) MakeBCH/ L&T/SIEMEN. |
| 17 | Providing of MS Pin and Nut guide roller of length 215 mmof dia 155,130,120,100,60 mm at different sections (APS) |
| 18 | Providing of 3 mm thick Rubber Sheet 1.20 m wide for Gasket. |
| 19 | Providing of Plumber block ( CM Coupling 270 mm long for 50 mm dia shaft APS ). |
| 20 | Providing of Push Button N.O. |
| 21 | Providing of Push Button N.C. |
| 22 | MCB Four Pole 32 Amp 415 V Make Havells / L&T |
| 23 | Supply and erection of sheet metal Iron Clad Changeover Switch on existing surface with G.I. bolts & nuts/rag bolts and nuts etc., according to the size of holes in the body of the switch including connections with suitable size of thimbles and bonding to the existing earth as per PWD General Specifications:- (ix) IC Four Pole Changeover Switch 320 amp., 415volts |
| 24 | Providing of Pakkad Sansi |
| 25 | Providing of Threading Tap 10 mm x1.5 |
| 26 | Providing of Taper Drill Chuck (As per Sample) |
| 27 | Providing of Cold Chiesel (As per Sample) |
| 28 | Providing of Hollow Punch (As per Sample) |
| 29 | Providing of Pipe wrench 24\\" Make Taparia/ PYE |
| 30 | Providing of Pillar Drilling machine, Drilling Dia 25 mm best quality complete set Make Atlas/ITCO/SP |
| 31 | Providing of Rubbing Blade/Wheel 4‘‘ (Make Freemen) |
| 32 | Providing of Cutter Blade/Wheel 4‘‘ (Make Freemen) |
| 33 | Providing of Gas cutter best quality with Tip (Make Kakkar) |
| 34 | Providing of Welding lead 400 Amp. |
| 35 | Providing of Welding Screen |
| 36 | Providing of Safety Life Jacket |
| 37 | Providing of EM-Brake ( Single Phase,A.C., 440 Volts, 50Cycles with 150 mm dia Brake Drum (Make BCH) |
| 38 | Providing of Silent Diesel Generator 25 KW Capacity (3 Phase) Make KOEL/Mahindra Powerol/Sudhir |
| 39 | Any Other Compatibility Report for Harpur.xls Run on 28-03-2025 12:10 The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when you save this workbook in an earlier file format. Minor loss of fidelity # of occurrences Some formulas in this workbook are linked to other workbooks that are closed. When these formulas are recalculated in earlier versions of Excel without opening the linked workbooks, characters beyond the 255-character limit cannot be returned. 2.0 'boq 1'!B21 'boq 1'!C22 |
