|
| 1 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required |
| 2 | 1 x 1.5 sq.mm |
| 3 | 2 x 2.5 sq.mm |
| 4 | 2 x 4 sq.mm |
| 5 | 2 x 6 sq.mm |
| 6 | Supplying and fixing following size/modules GI box along with modular base and cover plate for modular switches in recess etc as reqd |
| 7 | 3 Module |
| 8 | 6Module |
| 9 | 8 Module |
| 10 | 12 Module |
| 11 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required |
| 12 | 5/6 amps switch |
| 13 | 3 pin 5/6 ampssocket outlet |
| 14 | 15/16 amps switch |
| 15 | 6 pin 15/16 amps socket outlet |
| 16 | Supplying and fixing suitable size G.I. box with modular plate and cover in front or in recess including providing and fixing 25A modular socket outlet and 25A modular SP MCB \\"C\\" curve including connections, painting etc. as required |
| 17 | Supplying and fixing 2 module stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as reqd |
| 18 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required. Group C |
| 19 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 20 | laying of one number XLPE sheathed / PVC insulated power cable of 1.1 KV grade of following size direct in ground including excavation sand cushioning protective covering and refilling the trench etc,. As required |
| 21 | Upto 35 sq. mm. |
| 22 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required |
| 23 | 4 way (4 + 12), Double door |
| 24 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required |
| 25 | 63 A TP&N |
| 26 | Supply and fixing of street light pole box (250x200x100) complete with all necessary accessories including suitable clamps, bakelight sheet , brass screws , washers , and 01 no. 10 Amps Sp MCB(Sinle pole Miniature circuit breaker ), inclusive of making electrical connections, as required at site |
| 27 | Supply, Installation, testing and commissioning of pre-wired, single box fitting with one no. LED tube of frosted cover design, 18 Watt, 2100 lm, 50000 burning hours, size 1200 mm complete i/c all accessories etc. directly on ceiling/wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor cable and earthing etc. as required. fitting equivalent to Philips Make, Cat No. TMC 502 1xT-LED 22W, Tube equivalent to Philips Make, Cat No. Mas LEDTube 1200mm 18W 865 T8I-2100lm |
| 28 | Supply, Installation, testing and commissioning of pre-wired, Double box fitting with Two no. LED tube of frosted cover design, 18 Watt, 2100 lm, 50000 burning hours, size 1200 mm complete i/c all accessories etc. directly on ceiling/wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor cable and earthing etc. as required. fitting equivalent to Philips Make, Cat No. TMC 502 2xT-LED 22W, Tube equivalent to Philips Make, Cat No. Mas LEDTube 1200mm 18W 865 T8I-2100lm |
| 29 | Supply Installation, testing and commissioning of pre wired 2'x2' recess mounted 36 watts LED fitting square shape, Commercial grade with luminaire with Thorn/Trilux ldiffuser complete with all accessories i/c connection with 1.5 sqmm FRLS PVC copper conductor Cable with mounting 4 nos cutch wire /G.. chain for mntino from true ceiling etc. as required. Make Philips, Model No. - FullGlow G6 Cat No. RC380B LED36S-6500 G6 L60W60 PSU OD S1 or equivalent model of Thorn/Trilux |
| 30 | Providing and fixing 15\\" exhaust fan 900 RPM with all accessories, making connection, suitable size louver shutter and wooden work etc as reqd. |
| 31 | Supply, Installation, testing and commissioning of pre-wired, 70 watt, Street Light luminaire delivering >100 lumen/watt with PDC housing, 220-240 V, 50 Hz on existig street light pole/wall including all accessories and connection etc.as required. Make Philips, Cat No. BRP032 P LED75 CW SLR PSU GR SPD or equivalent model of Thorn/Trilux |
| 32 | Supplyig of one number PVC insulated and XLPE sheathed / power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 33 | 4c x 16 sq. mm |
| 34 | Supply, Installation, testing and commissioning of one no. LED tube 18 Watt complete as required. Tube equivalent to Philips Make, Cat No. LED PL-L,18W,6500K 2G11 |
| 35 | Supply, Installation, testing and commissioning of pre-wired, 150 watt, flood light Pressure die-cast aluminium housing with high impact resistance (IK07) glass cover IP66 protection, 130lm/w, 220-240 V, 50 Hz on existig street light pole/wall including all accessories and connection etc.as required..Philips Make, Cat No. BVP 192 LED 177 CW NB FG A1 PSU GR or equivalent model of Thorn/Trilux Please Enable Macros to View BoQ information |
