|
| 1 | Providing of 10 HP submersible pump capable of discharging 200 to 600 Liters per minute / at a total head of 94 to 39 Mtrs suitable for operation on three Phase 415 V 50Hz AC supply Motor and pump with stainless steel shaft and Noryl impeller having multistage impeller complete as required. ( Make:-KSB 10 HP 8 Stage 3 Phase Bore well Submersible Pump, Model BPDN- 242A-UMA 150 or equivalent BSNL approved make |
| 2 | ITC of 10 HP existing supplied submersible pump along with existing 65 mm dia PVC pipe , cable and nylon rope with suitable mean in the bore well for delivery of water from pump i/c supply and fixing suitable size of nuts , bolts & rubber packing for jointing the existing PVC pipe line etc complete as reqd. |
| 3 | Supplying / Fixing of 12 mm dia nylon rope for supporting the submersible pump motor set etc. in borewell complete as required at site. |
| 4 | Supply and fixing 65mm dia heavy UPVC column pipe with all accessories in existing borewell with Submersible pump complete as required at site. |
| 5 | Replacement of of 3 phase 415V 50Hz DOL Starter With Single Phase Preventer having suitable range ammeter, voltmeter, Over load Relay, having Range 9 A- 14A , suitable for operation of 10 HP Submersible pump motor set etc as required. ( M/s Lauritz Knudsen of Model MU-G15 FASD or SS of BSNL Approved make). |
| 6 | Providing andfixing 4 sqmm cu conductor Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors 1100 Volt, conforming to IS 694 complete as required at site. |
| 7 | Supply, installation, testing and commissioning of wall / floor mounted out door type cubicle Panel made out of 2mm thick M.S sheet of suitable size to accommodate the Submersible pump , MCBs , Kit Kat and other associated accessories including providing locking arrangement, duly gasketed and powder coat painted with approved colour and providing suitable size angle Iron Pedastal for installation of panel etc. complete as required. (Size of panel 1200 mm (H) x 600 mm (W) x 400 MM deep) |
| 8 | Supplying of following sizes Stranded Aluminum Conductor, XLPE Insulated, PVC Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 (Make: ISI Mark) |
| 9 | 4x10 sqmm |
| 10 | Replacement of faulty burnt Switch-Disconnector-Fuse Units by new one FN 160 TPN Switch-Disconnector-Fuse UnitSheet Steel Enclosure Type FN (TPN) S-D-F suitable for DIN fuse-link i/c interconnection testing etc as required at site. ( M/s L & T Model No FN 160 TPN or SS approved make) |
| 11 | Providing and fixing of 63 A 4 pole change over switch In Sheet Steel Enclosure in the existing Feeder Pillar i/c making connection, testing and commissioning complete as required at site. |
| 12 | Supplying and fixing 63 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 13 | Triple pole and neutral |
| 14 | Replacement of unservicable Street Lights with new one with best in class design & Robust heat sink along with class leading IP, IK & Surge protections for long lasting performance With Day/Night Sensor i/c connection, testing and commissioning as required at site. ( Senso 45W of Crompton make or or SS make) |
| 15 | Supplying and fixing of G.I bracket for mounting of LED street light fitting on wall fabricated out of 25 mm dia G.I pipe (medium class) of 1 Meter length having suitable machine made curve with suitable size of reducers, 32 mmx3 mm flat iron clamp and shall be painted with two coats of red oxide and two coats of aluminium paint including numbering complete as required. |
| 16 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including xcavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 17 | Upto 35 sq. mm |
| 18 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 19 | Upto 35 sq. mm |
| 20 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. |
| 21 | Upto 35 sq. mm |
| 22 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required |
| 23 | 4 X 10 sq. mm (25mm) |
| 24 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Please Enable Macros to View BoQ information |
