|
| 1 | Excavating over areas, n exc1.5 m deep and getting out in hard /dense soil complete all as specified and as directed. |
| 2 | M&L for PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 3 | M&L for RCC 1:1.5:3, type B1 (using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and as directed.Note : Reinforement shall be measured and paid separately under relevant item of this schedule. |
| 4 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed. |
| 5 | Formwork to rough finished surface sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 6 | Formwork to rough finished surface sides of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 7 | S&F mild steel screw bolts of diameter of neck 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, lenth of bolt exc 15cm long and n.exc 22.5cm long, complete all as specified and directed. |
| 8 | S&F mild steel bolts of diameter of neck 12 to 20mm purpose made with hexagonal or square head one end and screwed the other, or screwed both ends;each screwed end to be fitted with ashers and one hexagonal or square nut. exc 30cm long, complete all as specified and directed. |
| 9 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A,Plates(plain or chequered)channels,square cut or notched (ordinary and counter sunk) with riveted, bolted orwelded attachment, complete all as specified and directed. |
| 10 | S&F for (SWR) pipes,75mm bore single socket in any length with rubber ring joint, laid in trenches or floor etc complete all as specified and as directed. |
| 11 | M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed. |
| 12 | M&L for 15mm thick rendering in cement mortar (1:4), to other than fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 13 | M&L for hardcore with broken stone or boulder of gauge not exc 63 mm, deposited , spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed. |
| 14 | M&L for 75mm thick, PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in sub bases complete all as specified and as directed. |
| 15 | M&L for 100mm thick, PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in sub base floor complete all as specified and as directed. |
| 16 | M&L for 25mm thick, PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in sub base floor for receiving of granite complete all as specified and as directed. |
| 17 | M&L 20mm granite (of any type) tiles machine cut in floors bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including screed bed of 15 mm thick in cement mortar (1:4) complete all as specified and as directed. |
| 18 | M&L 20mm granite (of any type) tiles machine cut in skirting jointed with grey cement slurry and pointed with white cement with admixture of pigment tomatch the shade of granite stone including grinding and polishing and including screed bed of 10 mm thick in cement mortar (1:4) complete all as specified and as directed. |
| 19 | M&L for glazed coloured digital ceramic tiles 350x250x7mm/450x350x7mm thick in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 20 | S&F 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and including necessary fixing arrangement,complete all as specified and as directed. |
| 21 | M & L for Dora stone tiles 300mmX300mmX10mm thick, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and as directed. |
| 22 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor orthe side of waist slab with suitable arrangement complete all as specified and as directed.Make:Jindal/Tata/Sail |
| 23 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed. |
| 24 | Returning, filling in, including spreading, levelling, watering and well ramming of soil in layers n. exc 25cm thick complete all as specified and as directed. |
| 25 | Removing excavated soil to distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed. |
| 26 | S & F LED flood light of capacity 50 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaries efficacy ≥110 lumens/watt, CRI>70 ,PF > 0.95, CCT≥5500, IP66, impact resistance IK 07, inbuilt protection against lightning , over voltage, short circuit and surge/spike protection device upto 10kV, complete all as specified and as directed. Note: For item No 26 to27 Contractor have to write date of changing in bold letter using permanent marker and submit minimum two years manufacturer warrantee certificate with purchase voucher on completion of work. |
| 27 | S & F new generation, IP 65 LED post top lantern LED type 20 watt, family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LEDs as light source. Clear cover offers bright illumination for different applications with necessary connections, foundation with base pipe etc complete all as specified and as directed. |
| 28 | S & F 5/7W warm white/natural white Garden Spike Light, IP65 water resistant and adjustable Garden spike light complete all as specified and as directed. |
| 29 | S & F single pole & neutral DBs 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as specified and as directed. |
| 30 | S&F MCBs, SPN 6 to 32Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. |
| 31 | S&F MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. |
| 32 | Supply, laying and connecting of PVC insulated flexible multicore round copper conductor cable of size 1.5sqmm 3 core including necessary end connection and PVC conduit fixed along with pole structure/ground etc with all fixing and connecting accessories , complete all as specified and as directed. |
| 33 | M&L for house service GI bracket(Hook type) made out of 40 mm bore medium grade GI Pipe of length 3m and one No 90 degree bend fixing with clamps, nuts and bolts, MS hooks,stay etc, complete all as specified and as directed. |
| 34 | S&F 1100 volts grade heavy duty flat cable of size 10 Sqmm 2 core, PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including replacing 4mm suspension wire complete all as specified and as directed. |
| 35 | M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I, complete all as specified and directed. Please Enable Macros to View BoQ information |
