|
| 1 | Dismantling structural steel any description including door steel gates etc complete all as specified and directed. |
| 2 | M&L Rolled section/tubular section as in main and cross beams, purlins, rafters, posts where connected to common rafter and running rails etc confirming to Fe-410-W complete all as specified and directed. |
| 3 | Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed. |
| 4 | S&F AC designer composite ceiling board 4 to 6 mm thick in 600 x 600 mm panel confirming to IS-14682 type-B category-3 including GI frame, holdfast & suspenders complete all as specified and directed by Engineer-in-Charge. |
| 5 | Dismantling asbestos corrugated or semi corrugated sheets as in roof covering including ridge etc complete all as specified and directed. |
| 6 | S & F in repair for Pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.50 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and directed. Note : Rate quoted by contractor deemed to be included for roof up to height of 10 mtrs. |
| 7 | All as per ser item No 6 above but plain sheets as in ridges,eaves,gutters,drain complete all as specified and directed. Note : Rate quoted by contractor deemed to be included for roof up to height of 10 mtrs. |
| 8 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 9 | Screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 10 | M&L for light shade Vitrified tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile) |
| 11 | -------ditto ----- but on vertical surfaces as in skirting including 8-10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed. |
| 12 | Green/Black granite on shelves 18 to 20 mm thick set jointed with 3.00 kg per sqm neat cement slurry and pointed with coloured cement to match the surface complete all as specified and directed. |
| 13 | M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified. |
| 14 | PCC 50 mm thick type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping/benching complete all as specified and directed. |
| 16 | Glazed ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in 10 mm thick cement mortar 1:3 and finished even and rough complete all as specified and directed. |
| 17 | Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 42,920 during AOCNote:- Tenderers shall not quote for this Schedule Please Enable Macros to View BoQ information |
