|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed. |
| 3 | M&L for Non Skid Coloured Ceramic Tiles of design as approved 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 4 | M&L for Non Skid Coloured Ceramic Tiles of design as approved 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 5 | M&L for Glazed Coloured Ceramic Tiles 450 x 350 x 8 mm/450 x 300 x 7-8 mm thick in vertical surface such as dado / skirting / risers to steps etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 6 | S&F Non skid ceramic Coloured floor tiles of 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed. |
| 7 | All as per item No.06 above but fixed on and including 10 mm thick cement plaster to receive tiles in CM 1:4 complete all as specified and directed. |
| 8 | S&F light shade vitrified ceramic tiles 10mm thick n.exc 0.36 Sqm each in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 9 | All as per item No.08 above but fixed on and including 10 mm thick cement plaster to receive tiles in CM 1:4 complete all as specified and directed. |
| 10 | M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 11 | M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finshed rough to receive wall tiles as in skirting, dado etc complete all as specified and directed. |
| 12 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20mm thick screed bed in CM 1:4 including moulding and rounding complete all as specified and directed. |
| 13 | M&L for 25mm thick PCC 1:2:4, type B-0, (using 12.5 mm graded stone aggregate) as in sub base of flooring, surface finished even and rough (as in levelling course) to receive the floor finishes complete all as specified and directed. |
| 14 | M&L for 100mm thick PCC 1:3:6 type C-2 ( using 40mm graded stone agg) as in base/ sub base complete all as specified and directed. |
| 15 | M&L for 75mm thick PCC 1:3:6, type C-2, (using 40 mm graded stone aggregate) as in plinth protection etc. laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 16 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework & precast concrete articles. Complete all as specified and directed. |
| 17 | M & L for brick work old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 18 | M & L for brick work old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 19 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed. |
| 20 | M&L for 10 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | M&L for 15mm thick rendering on fair faces of brick surfaces in CM (1:4), finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over a coat of primer and avg 1 mm thick wall care putty complete all as specified and directed. |
| 23 | M&L for preparation of newly plastered surfaces of wall and applying two coats cement base paint over a coat of alkali resistant priming complete all as specified and directed. |
| 24 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing from site complete all as specified and directed. |
| 25 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing from site omplete all as specified and directed. |
| 26 | S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed. |
| 27 | S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms) complete all as specified and directed. |
| 28 | S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed. |
| 29 | S&F in repair ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms) complete all as specified and directed. |
| 30 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15 mm bore dia of pipe complete all as specified and directed. |
| 31 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed. |
| 32 | Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 33 | Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 34 | S&F 15 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed. |
| 35 | S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors complete all as specified and directed. |
| 36 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 15 mm bore of pipe complete all as specified and directed. |
| 37 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 20 mm bore of pipe complete all as specified and directed. |
| 38 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed |
| 39 | M&L for Cleaning and removing all scale and dirt, etc., from RCC/PVC tanks exc 250 ltr & not exc 500 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 40 | M&L for Cleaning and removing all scale and dirt, etc., from RCC/PVC tanks exc 500 ltr & not exc 1000 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 41 | S&F in repair 15 mm bore, Fancy type, Chromoium plated Bib taps, cast aopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 42 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 43 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 44 | S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 45 | S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and directed. |
| 46 | S&F in repair, 32 mm bore, PVC waste pipe for Wash Basin/Kitchen Sink etc. complete all as specified and directed. |
| 47 | S&F in repair, 32 mm bore dia of discharge pipe, waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms) etc. complete all as specified and directed. |
| 48 | S&F in repair, 32 mm dia of bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. Complete all as specified and directed. |
| 49 | S&F in repair, Chromium Plated Grating, 100 mm dia with waste hole fixed on floor trap, nahani trap etc. complete all as specified and directed. |
| 50 | S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete all as specified and directed. |
| 51 | S&F in repair Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed. |
| 52 | S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 53 | S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 54 | S&F in repair, Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests and making good floor (excluding flushing cistern & flush pipe) etc. Complete all as specified and directed. |
| 55 | S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 56 | S&F in repair, Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 57 | S&F in repair, 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 58 | S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 59 | S&F in repair, 125 mm size, Brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 60 | S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 61 | S&F in repair, Brass Chromium Plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc. complete all as specified and directed. |
| 62 | S&F in repair, 75 mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 63 | S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 64 | S&F in repair, CP Toilet paper holder with flat recessed type stainless steel complete all as specified & directed. |
| 65 | S&F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified & directed. |
| 66 | S&F in repair 15 mm bore fancy type Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-105gms) complete all as specified and directed. |
| 67 | S&F in repair 15 mm bore fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms) complete all as specified and directed. |
| 68 | S&F in repair 15 mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 69 | Taking down shutters of any description not exceeding 1 sqm each leaf and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and directed. |
| 70 | Taking down shutters of any description exceeding 1 sqm but not exeeding 2 sqm each leaf and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and directed. |
| 71 | S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 72 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 73 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed. |
| 74 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed. |
| 75 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 76 | S&F in repairs mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 77 | S&F in repair, 600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers complete all as specified and directed. |
| 78 | S & F in repairs PVC box type mirror cabinet selected quality of size 45X30X15cm thick coloured fixed with min 04 Nos screws on walls complete all as specified and directed. |
| 79 | S&F in repair, Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flushing cistern with brackets, flush pipe, grating & union for discharge pipe complete all as specified and directed. |
| 80 | S&F in repair, Urinal partition wall mounted, white colour of size 310 x 770 mm. Urinal partitions slabs terminating about 40 cm above floor line complete as specified and directed. |
| 81 | M&L for preparation of old painted plastered surfaces of wall & applying one coat of white wash complete all as specified and directed. |
| 82 | M&L for preparation of old painted surfaces of wall & applying one coat of cement based paint complete all as specified and directed. |
| 83 | M&L for preparation of old painted surfaces of wall & applying one coat of oil bound distemper complete all as specified and directed. |
| 84 | M&L for preparation of old painted ceiling surfaces & applying one coat of white wash on ceiling surfaces complete all as specified and directed. |
| 85 | M&L for preparation of old painted Wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 86 | M&L for preparation of old painted Steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 87 | Demolition and breaking up drain pipes 110mm /75mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 88 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 89 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 90 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 91 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 92 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 93 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 94 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 95 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 96 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 97 | S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 98 | S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed. |
| 99 | S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed. |
| 100 | Taking down Chowkhats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 101 | Taking down Chowkhats or frames exc 1.50 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 102 | Taking down Shutters of any description area exc 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. |
| 103 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). |
| 104 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter & fixing with stainless steel/ Aluminium butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction of Engineer-in-Charge.(Note: stainless steel/Aluminium butt hinges shall be paid separately) |
| 105 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 106 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement complete all as specified and directed. |
| 107 | S&F of Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 108 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 109 | S & F Anodised aluminium powder coated ( minimum 50 micron thickness) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as per specified and directed. |
| 110 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, as in railing/cladding complete all as specified and directed. |
| 111 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in railing/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 112 | S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 113 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 114 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 115 | S&F MS steel flat iron as in wind tie for roof sheet including securing bolts confirming to Fe 410-W (Gde-E- 250) Quality-A complete all as specified and directed. |
| 116 | S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars , stiffeners , gusset plates, Fe-410- W(Gde E-250) quality B etc. complete all as specified and directed. |
| 117 | S&F Welded steel wire fabric (mesh) Weight Not exc 4 kg per square metre any size supplied and fixed complete to wood or steel members complete all as specified and Directed |
| 118 | M&L for preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 119 | M&L for preparation of new or previously untreated surfaces of steel of any description, not exc 10cm in width or girth when unconnected with other painting and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 120 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all specified and directed. |
| 121 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation of post hole complete all as specified and directed. |
| 122 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 123 | S&F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm including Hangers 6 mm dia, G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete and including materials and labours for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and directed. |
| 124 | S&F 75 mm size, butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodized type C-21 complete all as specified and directed. |
| 125 | S&F aluminium anodised barrel tower bolts 150mm long of extruded section complete all as specified and directed. |
| 126 | S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 127 | S & F 300mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 128 | Demolition of reinforced cement concrete in ground floor and pavings not exc 15 cm thick above or below ground level and removing the debris outside from defence land complete all as specified and as directed. |
| 129 | Dismantling unframed timber scantling 40 sqcm and over in section , in any position complete all as specified and directed. |
| 130 | Dismantling timber scantling in filllets , rails ,posts , rafters , purlins , etc. under 40 sqcm in section in any position unframed work complete all as specified and directed. |
| 131 | Dismantling boarding of any description, fixed in any position with nails complete all as specified and directed. |
| 132 | S&F 0.8mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed ) with grade of zinc coating 275 including welding or soldering joints complete all as specified and as directed . |
| 133 | S&F light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles exc 0.42 sqm but n.exc 1.0 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed . |
| 134 | All as per above item no.133 but in skirting fixed over and including 10mm thick plaster in CM 1:4 complete all as specified and as directed. |
| 135 | M& L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thick screed bed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and as directed. |
| 136 | M&L for Kota stone slab 20-25 mm thick in riser steps , skirting or dadao and pillar laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and as directed. |
| 137 | S&F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete and including materials and labours for 4mm thick of size 600x600mm PVC (Polyvinyl Chloride) boards with water profing PVC sheets on one side and prelaminated decorative PVC sheet on the other side fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified and as directed. |
| 138 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 139 | S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed. |
| 140 | M&L for second class hardwood as in scantlings clean sawn timber fixed complete all as specified and as directed. |
| 141 | M&L for 35mm thick second class hardwood as in Boarding in Floors and Skirting Planed one side ,with butt joints and fixed with secret nails supplied and fixed complete all as specified and as directed |
| 142 | S&F monopoly woooden flooring 8mm thick including polishing duly approved by Eng-in-charge. |
| 143 | M&L for RCC 1:2:4, (Nominal Mix) type B-1 using 20mm graded agg.as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed (Note:- Reinforcement shall be measured and paid seperately). |
| 144 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed. |
| 145 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip quality complete all as specified and as drected. |
| 146 | M&L for preparation of new or previously untreated Wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 147 | M&L for preparing of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of aluminum paint on steel surface complete all as specified and as directed. |
| 148 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 149 | S&F 105X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 150 | S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 151 | S&F 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces, 2nd class HW rail and style of size as per IS: 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 152 | S&F 35mm thick, second class hardwood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 153 | All as per item No.152 above but 30mm thick as in window/ventilators etc are provided with stiles and rails as specified in SSR part - I, Section 8, clause 8.24 (b) complete all as specified and directed. |
| 154 | All as per item No.152 above but 30mm thick as in window/ventilators etc are provided with stiles and rails as specified in SSR part - I, Section 8, clause 8.24 (b); but divided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers, complete all as specified and directed. |
| 155 | S&F mild steel flat iron as in bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed. |
| 156 | M & L for PCC 1:2:4 type B-0 using 12.5mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 157 | S&F 100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 158 | S&F 75mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 159 | S&F 100 mm size, butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodized type C-21 complete all as specified and directed. |
| 160 | S&F aluminium anodised barrel tower bolts 100mm long of extruded section complete all as specified and directed. |
| 161 | S & F 100 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 162 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 163 | M&L for 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats and necessary items to fix with frame complete all as specified and directed. |
| 164 | S&F in Brass, 4 levers, Mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 165 | S&F in repair Aluminium (Die cast body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width & of weight between 36 to 60 Kg complete all as specified and directed. |
| 166 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 167 | M&L for 15mm thick rendering on stone masonary surafaces or surface other than fair face of brick work or on one side of lathing CM (1:6), finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 168 | M&L 20mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM (1:4), finished surfaces even and fair without using extra cement complete all as specified and directed. |
| 169 | M&L for 10mm thick rendering in CM (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 170 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/10sqm over new surfaces complete all as specified and as directed. |
| 171 | M&L for preparing new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 172 | M&L for preperation of old decorated plastered/un-plastered surfaces of wall at any height ,pilllars,cornices and making surface good at any height including necessary sacffolding and applying two coats of white wash complete all as specified and directed including following :- (i) Use of all scaffolding , trestles , ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails , making good holes, cracks etc. (iii) Work in patches and narrow widths , bands, cornices, plasterers etc and cutting in edges to line where necessary . (iv) Spreading and removing coverings to doors, windows,floors, fittings,etc. to protect them from splashes. (v) Removing and replacing furniture , moveable cupboard, chicks, blinds etc. (vi) Cleaning of bush , shrubs, vegetation , grass,weed , saplings etc (vii) Washing floors ,cleaning glass , joinery, electric fittings, wiring etc., of drops and splashes and leaving premise , clean and tidy etc.complete all as specified and as directed. |
| 173 | M&L for preperation of old decorated plastered/un-plastered surfaces of wall at any height ,pilllars,cornices and making surface good at any height including necessary sacffolding and applying two coats of oil bound distemper including following :- (i) Use of all scaffolding , trestles , ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails , making good holes, cracks etc. (iii) Work in patches and narrow widths , bands, cornices, plasterers etc and cutting in edges to line where necessary . (iv) Spreading and removing coverings to doors, windows,floors, fittings,etc. to protect them from splashes. (v) Removing and replacing furniture , moveable cupboard, chicks, blinds etc. (vi) Cleaning of bush , shrubs, vegetation , grass,weed , saplings etc (vii) Washing floors ,cleaning glass , joinery, electric fittings, wiring etc., of drops and splashes and leaving premise , clean and tidy etc.complete all as specified and as directed. Note- Rates are inclusive of repairing surfaces of damaged portion with puttty if required. |
| 174 | M&L for preperation of old decorated plastered/un-plastered surfaces of wall at any height ,pilllars,cornices and making surface good at any height including necessary sacffolding and applying two coat cement base paint including following :- (i) Use of all scaffolding , trestles , ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails , making good holes, cracks etc. (iii) Work in patches and narrow widths , bands, cornices, plasterers etc and cutting in edges to line where necessary . (iv) Spreading and removing coverings to doors, windows,floors, fittings,etc. to protect them from splashes. (v) Removing and replacing furniture , moveable cupboard, chicks, blinds etc. (vi) Cleaning of bush , shrubs, vegetation , grass,weed , saplings etc (vii) Washing floors ,cleaning glass , joinery, electric fittings, wiring etc., of drops and splashes and leaving premise , clean and tidy etc.complete all as specified and as directed. Note- Rates are inclusive of repairing surfaces of damaged portion with puttty if required. |
| 175 | M&L for preperation of old decorated plastered/un-plastered surfaces of wall at any height ,pilllars,cornices and making surface good at any height including necessary sacffolding and applying one coat of Weather proof exterior emulsion paint including following :- (i) Use of all scaffolding , trestles , ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails , making good holes, cracks etc. (iii) Work in patches and narrow widths , bands, cornices, plasterers etc and cutting in edges to line where necessary . (iv) Spreading and removing coverings to doors, windows,floors, fittings,etc. to protect them from splashes. (v) Removing and replacing furniture , moveable cupboard, chicks, blinds etc. (vi) Cleaning of bush , shrubs, vegetation , grass,weed , saplings etc (vii) Washing floors ,cleaning glass , joinery, electric fittings, wiring etc., of drops and splashes and leaving premise , clean and tidy etc.complete all as specified and as directed. Note- Rates are inclusive of repairing surfaces of damaged portion with puttty if required. |
| 176 | M&L for preperation of old decorated plastered/un-plastered surfaces of wall at any height ,pilllars,cornices and making surface good at any height including necessary sacffolding and applying two coats of Weather proof exterior emulsion paint including following :- (i) Use of all scaffolding , trestles , ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails , making good holes, cracks etc. (iii) Work in patches and narrow widths , bands, cornices, plasterers etc and cutting in edges to line where necessary . (iv) Spreading and removing coverings to doors, windows,floors, fittings,etc. to protect them from splashes. (v) Removing and replacing furniture , moveable cupboard, chicks, blinds etc. (vi) Cleaning of bush , shrubs, vegetation , grass,weed , saplings etc (vii) Washing floors ,cleaning glass , joinery, electric fittings, wiring etc., of drops and splashes and leaving premise , clean and tidy etc.complete all as specified and as directed. Note- Rates are inclusive of repairing surfaces of damaged portion with puttty if required. |
| 177 | M&L for preparing of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.. |
| 178 | M&L for Re-writing letters or figures (Block , Roman , Italic or Indian) n. exc. 30cm high complete all as specified and directed. |
| 179 | M&L for preparation of old wooden surface of any description over 10cm width or girth and applying two coats of Varnish complete all as specified and directed. Please Enable Macros to View BoQ information |
