|
| 1 | NOTE: 1. The bidders/ contractors are advised to read tender documents and all corrigendum/ amendments and General conditions of contracts before entry/ quoting the rates. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed. |
| 4 | S&F Factory made single extruded Prelaminated all sides of WPC (Wood Polymer Composite) solid door/ window/ Clerestory windows & other Frames/ Chowkhat of size 65 x100 mm Single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/ Sintex/ Rajshree/ Navaratan |
| 5 | All as per item No 3 here in beofre but of Frame size 65x 125 mm with double rebate |
| 6 | S&F 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 7 | All as per here and before item no-05 but solid decorative type glazed/skolton door shutter of size 30mm thick |
| 8 | M&L for black Granite (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 9 | Taking down Chowkhats or frames with shutters and refixing the frames and sliding type/openable shutters in same opening , fixing of new wire mesh /glass complete all as specified. Note: wire mesh / Glass measured separately. |
| 10 | S&F powder coated aluminium window and ventilator shutters (50 micron minimum thickness for powder coating), side hung type without sash bars aluminium sections weighing 0.55 kg /m including necessary joining cleats , glazing clips, rubber packing, anodised aluminium fittings such as peg stays 150mm long (01Nos), hinges type B-21 100mm long (02 Nos), suitable handle (01 Nos etc. complete all as specified |
| 11 | S&F 125 mm long stainless steel Butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed. |
| 12 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 13 | S & F 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty / almn beading in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 14 | S&F SS alloy floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed. |
| 15 | S&F 150 mm long Extruded stainless steel handles designer type, fabricated type polished complete all as specified and as directed. |
| 16 | S&F 100 mm long stainless steel handles designer type, fabricated type polished complete all as specified and as directed. |
| 17 | S&F 150mm size stainless steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 18 | M&L for 250mm long stainless steel sliding door bolt withstand or die-cast SS hasp, staple (bolt type) and fixing bolt with rolled or drawn SS bolts and fixed complete all as specified and as directed. |
| 19 | S&F in repair 25 mm dia stainless steel curtain rod 1.25mm thick complete all as specified and directed by Engr-in-charge. |
| 20 | S&F in repair Stainless steel decorative funnels for 25mm dia curtain rod complete all as specified and directed by Engr-in-charge. |
| 21 | S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately |
| 22 | S&F auto soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele, Butterfly |
| 23 | S&F Ball bearing runners 450 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele, Butterfly |
| 24 | S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified. |
| 25 | S & F to 9 feet pulley operated cloth drying system, aluminium anodised 20mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make :- Easy dry or other equivalent make, sample as approved by GE. |
| 26 | S&F in factory made 100 % Prelaminated solid wood plastic composite (WPC) flush type shutter for kitchen cabinet of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of density 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification. Make : ECHON/ Sintex/ Rajshree/ Navratan |
| 27 | Complete removal of existing treatment and M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total) |
| 28 | M&L for Preparation of old plastered or unplastered surfaces wall and applying two coat of oil emulsion distemper (white or tinted) on walls complete all as specified and as directed. |
| 29 | M&L for Preparation of old plastered or unplastered surfaces of ceiling and applying two coat of white wash on decorated surface of ceiling complete all as specified and as directed. |
| 30 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 31 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 32 | S&F 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 33 | S&F Low density polyethylene pipes (LDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. fixed to wall/ceiling incl bends/elbow and cancealed pipeline complete all as specified. |
| 34 | Supplying and laying 20mm OD of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 35 | S&F in repairs 15mm bore fancy type bib tap with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed. Please Enable Macros to View BoQ information |
