|
| 1 | DSR item no.2.2Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 2 | 63/100 A,30KA,FPMCCB |
| 3 | 200 A,36KA,FPMCCB |
| 4 | 400 A,50KA,FPMCCB |
| 5 | 630 A,50KA,FPMCCB |
| 6 | DSR item no.2.4Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 7 | 8 way (4 + 24), Double door |
| 8 | DSR ITEM NO.2.10Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 9 | Single pole |
| 10 | Triple pole and neutral |
| 11 | DSR item no.4.1Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 12 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 13 | DSR item No. 5.1Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. |
| 14 | DSR item No. 5.7Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 15 | DSR item no.5.12Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 16 | DSR ITEM NO.5.6Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 17 | DSR ITEM NO.5.8Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 18 | DSR Item No 15.16Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 19 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 20 | 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 21 | Supply and laying of PVC insulated PVC sheathed Aluminum conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of M.S. clamp of suitable thickness. The job include the cost of making connections with suitable size of Al. Lugs / thimbles, testing, commissioning etc. as required to the entire satisfaction of Engineer In Charge. The cable should be of Polycab / KEI / Havells / R.R. Cables / Finolexmake only. |
| 22 | Size 70 Sq.mm 3.5 core PVC Al. Arm. Cond. Cable |
| 23 | Size 150 Sq.mm 3.5 core PVC Al. Arm. Cond. Cable |
| 24 | Size 400 Sq.mm 3.5 core PVC Al. Arm. Cond. Cable |
| 25 | Supply and Laying of following XLPE insulated and PVC sheathed, armored, aluminum conductor cable of 1.1KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing trench/ DWC/RCC/HUME pipe as required at site. The job include the cost of making connections with suitable size of Al. Lugs/ thimbles, testing, commissioning etc. as required to the entire satisfaction of Engineer In Charge. |
| 26 | Size 16 Sq.mm 4 core PVC Al. Arm. Cond. Cable |
| 27 | Size 120 Sq.mm 3.5 core PVC Al. Arm. Cond. Cable |
| 28 | Size 400 Sq.mm 3.5 core PVC Al. Arm. Cond. Cable |
| 29 | Supply and erection of sheet metal bus-bar chamber on existing surface with required no. of bus-bar strips of suitable length and cross sectional area made of copper strips of suitable length and cross sectional area enclosure made of M.S sheet 1.6 mm thick with detachable cover fitted with dust excluding gasket and secured with sufficient no. of cadmium plated iron screw and of given overall dimensions and to be fixed with G.I bolts and nuts/Rag bolts and nuts etc., complete with all accessories including connections with suitable size of tin coated copper thimbles bonding to the existing earth and painting etc as desired by the Engineer- in-charge. |
| 30 | Sheet metal bus-bar chamber suitable for 100 Amp 415 volt capacity with 4 copper strip bus-bar . |
| 31 | Sheet metal bus-bar chamber suitable for 200 Amp 415 volt capacity with 4 copper strip bus-bar . |
| 32 | Sheet metal bus-bar chamber suitable for 400 Amp 415 volt capacity with 4 copper strip bus-bar . |
| 33 | Sheet metal bus-bar chamber suitable for 630 Amp 415 volt capacity with 4 copper strip bus-bar . |
| 34 | S/E of enclosure for MCCB 4 pole made out of 16 G MS sheet. The Enclosure should be painted after one coat of primer after rubbing the surface with sand paper. The job includes the cost of its erection in existing angle iron board with nut bolts/ screws etc. The enclosure should be of following size. |
| 35 | Size of enclosure for 63/100 amp 4 pole |
| 36 | Size of enclosure for 200 amp 4 pole |
| 37 | Size of enclosure for 400 amp 4 pole |
| 38 | Size of enclosure for 630 amp 4 pole Please Enable Macros to View BoQ information |
