|
| 1 | Item No.1 :- Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 2 | Item No.2 : -Providing dry/trap/granite/quartzite/ gneisis rubble stone soiling 15 cm to 20 cm thick incliuding hand packing and compacting etc complete. |
| 3 | ITEM NO.3 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 4 | Item No 4:- Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete. |
| 5 | ITEM NO.5 :-Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) |
| 6 | ITEM NO.6 :-Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. |
| 7 | ITEM NO.7- Supplying R.C.C. Pipe Np-2 class 300mm Dia 2m long. etc |
| 8 | ITEM NO.8 :-Supplying soft murum at the road site, including conveying and stacking complete. |
| 9 | ITEM NO.9 :-Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 10 | ITEM NO.10 :-Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 11 | ITEM NO.11- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 12 | Item No.12 :- Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including removing the excavated material up to distance of 50 m, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming,watering including shoring and strutting etc complete. (Lift up to 1.5m to 3.0 m)BY Machnical means |
| 13 | Item No 13 :- Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA |
| 14 | Item No.14 : -Back filling behind abutment, wing wall and return wall as per drawing and technical specifacitions etc complete. |
| 15 | Item No. 15 :- Providing and laying weep holes of 100 mm diametre PVC pipes as per drawing for abutments, returns, ,return wall etc. complete. Please Enable Macros to View BoQ information |
