|
| 1 | Providing and laying vitrified matt fininsh tiles having size 590mm to 605mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 2 | Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100 at 600mm c toc on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete |
| 3 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 4 | Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.) |
| 5 | Providing and applying blue and white coloured thermoplastic road marking paints for marking a 3ft x3 ft universal accessibility symbol within the parking bay as per the drawings and up to the satisfaction of the engineer in charge. |
| 6 | Providing and fixing framework of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50mm x 40mm weighing 0.39 Kilogram/m. at 60cms c/c and fixed with (15x15mm flanges weighing 0.119 Kilogram/m suspended on 6mm dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50mm x 40mm weighing 0.39 Kilogram/m etc. including all labour etc. complete. |
| 7 | Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab.The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from under side to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers foradditional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cutouts , painting including labour, material, liftsetc. all complete. |
| 8 | Providing & fixing in position, heavy duty fully upholstered Auditorium chairs 520mm c toc tip-up type. Height of back should be less than 1030mm with plastic protective cover on back and bottom having teakwood handles.Back to back distance is 1000mm.The auditorium chairs should be of following specifications 1. Powder Coated Heavy duty MS Stand. 2. Individually moulded , ergonomically designed seat and back cushions. 3.Moulded Polyurethane Foam cushion. PU foam density 48–52 Kilograms/cu.mtr 4. Moulded Polyurethane Foam manufactured in certified ISO9001 facility to ensure consistency indensity for longevity. 5.Upholstered in Foam laminated stretch sandwich Fabric for clean finish and soft comfortable feel asper the colour & patterns elected by the client. 6.Seat and Back should have moulded synthetic protective cover. 7.Wooden or PU armrest 65mm x 20mm -330mm long . 8. Mountedusing Anchor fasteners. |
| 9 | Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teakwood frame, doors made from 50mmTeakwood frame 600 x 600 ctoc filled with 1000Gsm synthetic wool 50mm thick and 3mm Tecsound from bothsides, 12mm waterproof ply & veneer from bothsides, including 150mm heavy duty SS hinges (Geze/Dormaoreq.) 4 noeachleaf, withDoor-closer (Dorma/Gezeoreq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Completein all aspects. including all materials labour, finishing etc complete |
| 10 | Providing & Fixing in position, Carpet more than 800+ gsm, made with 100% stain proof fibres of approved make along with 5mm under lay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete |
| 11 | Providing & Fixing in position, Acoustical Panelling made from 12mm wp Plywood & 1.5mm laminate on, 50x50mm Sal-wood frame of 600x600 c toc having wooden supports from wall of required length, infront of 1000 Gsm synthetic wool 50mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete |
| 12 | Providing & Fixing in position, decorative Patti of 80mm thick on Acoustical Panel Wall as per approved make and architectural drawing details |
| 13 | Providing & Fixing in position, Sliding Folding Door as per approved make and architectural drawing details |
| 14 | Supply, Installation & Testing of of standard DBs with all accessories including MCBs etc. |
| 15 | MAIN VTPN DB |
| 16 | 6 way VTPN MCCB I/C DB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :-(Light Control DB ) |
| 17 | Incomer : 1. 100A TP+NL MCCB,16 KA: 1 No. |
| 18 | Outgoing : |
| 19 | 1. 40A 3P MCB,10 KA: 3 No. |
| 20 | 4. 63A 3P MCB,10 KA: 1 No. |
| 21 | LIGHTING /AC/ RAW Power DB |
| 22 | 8 way TPN MCB DB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :-(Light Control DB ) |
| 23 | Incomer : |
| 24 | 1. 63 A 4P MCB,7.5/10 KA: 1 No. |
| 25 | 1. 63A, 30mA, 4P, RCCB:- 1 Nos . |
| 26 | Outgoing : |
| 27 | 6/10/16/20A SP MCB ‘ C’ Characteristic , 10 KA : 10Nos. |
| 28 | UPS DB (UPS +EMERGENCY CIRCUIT ) |
| 29 | 12 way sPN MCB DB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :- |
| 30 | Incomer : |
| 31 | 1. 40A 4P MCB,10 KA: 1 No. |
| 32 | 1.40A, 30mA, 4P, RCCB:- 1 Nos . |
| 33 | Outgoing : |
| 34 | 6/10/16/20A SP MCB ‘ C’ Characteristic , 10 KA : 10Nos. |
| 35 | 40-63 Amp TPN MCB with metal enclosure For UPS incmng |
| 36 | 40-63 Amp ELMCB 300 MA For HVAC |
| 37 | Cable Termination |
| 38 | End Termination of following cables using proper size and type of Lugs. Proper and permanent tagging/numbering shall be done. Proper size cable glands shall be used for each cable entry. |
| 39 | Cable Termination |
| 40 | WIRING Point Wiring |
| 41 | Supply & Installation of point wiring using 600v grade 1.5 sqmm copper conductor PVC insulated wires PVC conduits laid concealed over false ceiling or in wall chases including 1.5 sqmm circuit wires from the relevant DB and also including 1.5 sqmm green colour copper earth wire and provision of grid plate type switches & sockets as approved by the consultant .Each circuit feeding not more than 8 points OR 800 watts as per following configuration |
| 42 | Primary light points including the cost of 5A switch(Avg circuit length 6mtr) |
| 43 | Secondary light points looped from the above point (Avg circuit length 3mtr) |
| 44 | 5/15A Ups / Raw Power Plug point. (Rate are without wire) Fridge/Water dispencer / Ovan / Printer / Ploter / Fire panel / wall fan / Exaust / pantry / water purifier / etc.. |
| 45 | HALF POINT (6A SWITCH AND SOCKET ON MAIN SWITCHBOARD) |
| 46 | S & I of point wiring for UPS Point / Raw Power Points for computers using 3 X 2.5 Sqmm copper wires pulled through already laid raceways and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions Each point consisting of 2 nos of 5A , 2/3 pin sockets & 1 No., 15A Switch , wired together forming one point |
| 47 | 6 Amp 5 Pin Socket with 6 Amp Switch for Raw power.(Avg circuit length 5 mtr) |
| 48 | LIGHTING FIXTURES & FANS |
| 49 | Supply & Installation of LED DOWNLIGHTER COB 15W - 18 W ( Philips cat. No. DN296B LED 20S PSU WH, CW - IRDLR01RD-15CW OR Eqv) 5 year warranty |
| 50 | Supply & Installation of 1 X 20 Watt Wall Light (Philips cat. No. RC810X LED20S 6500 PSU W15L 120 ODWH) |
| 51 | Wall mounted double bearing fan of 1200 mm sweep with 3/4 star energy saving rated BEE. |
| 52 | Sprinkler System |
| 53 | Above ground piping - MS,Black, IS1239, Part 1, C Class, Fittings as per IS 1239, Part 2, Painting Fire Red.MAKE:Jindal |
| 54 | Butter fly valve 80 NB |
| 55 | Sprinkler Pendant type |
| 56 | ISI marked (IS 14609) portable fire extinguishers, A.B.C. dry powder(Mono Ammonium phospate 90% filling chemicals) type of with pressure gauge, discharge hose and nozzle and complete in all respects including initial fill.supoort details as per drawing as per specification and directed/approved by Engineer-in-Charge (6kg) |
| 57 | ISI marked (IS 14609) portable fire extinguishers, CO2. dry powder(Mono Ammonium phospate 90% filling chemicals) type of with pressure gauge, discharge hose and nozzle and complete in all respects including initial fill.supoort details as per drawing as per specification and directed/approved by Engineer-in-Charge (6kg) |
| 58 | Supply, Lifting, Shifting, Positioning, Installation, Testing and Commissioning , documentation Of Following HVAC Components. |
| 59 | DUCTABLE UNITS (MAKE - BLUE STAR) |
| 60 | R-410A /Eco friendly refrigerant ( with zero ODP )complete with Inverter scroll compressor, heat exchanger, multi step function to meet load fluctuation, axial flow quiet operation with inverter motor for condenser fan , microprocessor based control panel, safety devices, controls, fault alarm indications, memory storage, condenser coil with copper tube and copper header, condenser guard,soft starter, fan guard, vibration isolators, Rubber pad etc . All compressors should be inverter controlled in a single machine . |
| 61 | 8.5 TR |
| 62 | Installation Charges For VRF Outdoor Units |
| 63 | Copper Piping With Insulation |
| 64 | Control Cabling for Odu to Idu units |
| 65 | Drain Piping with Nitrile Rubber Insulation |
| 66 | 40mm Gray PVC Piping with Insulation |
| 67 | R 410A Refrigerant Gas |
| 68 | MS Stand for Outdoor Units |
| 69 | Lifting, Shifting and Possitioning |
| 70 | DUCTING GI |
| 71 | THERMAL INSULATION |
| 72 | CANVAS PIECE |
| 73 | LINEAR GRILL |
| 74 | Auditorium Hall 1 (30/50 ft ) |
| 75 | DNM D-820TIndoor/Outdoor SpeakerHSN: 85182200 |
| 76 | DNM PA 2000Public Address AmplifierHSN: 85437099 |
| 77 | Yamaha MG16XU 16 Channel Analog MixerHSN: 85437022 |
| 78 | Marantz NR-1510 (Black)5.2 Channel AV ReceiverHSN: 85279990 |
| 79 | Motorised Projector Screen180\\" 16:9 Ratio Motorised Projector Screen full HD 4K CompatibleHSN: 90106000 |
| 80 | Benq TK 700 4K UHD DLPProjector with Standard AccessoriesHSN: 85286900 |
| 81 | Mipro Dual Wireless MicDual Wireless Mic System ACT-312 (3 set dynamic handheld mic )HSN: 85181000 |
| 82 | Audio Technica PRO 49QL + AT8668sCardioid Condenser Quick-mount Gooseneck with baseHSN: 85183000 |
| 83 | CablesSpeaker wire and HDMIHSN: 85441990 |
| 84 | Setup & Installation ChargesNo. of Visits: 1No. of Technicians: 2 Draughtsmen Man-hours: 16SAC: 998739 |
| 85 | Auditorium 2 30/50 feet |
| 86 | DNM D-820TIndoor/Outdoor SpeakerHSN: 85182200 |
| 87 | DNM PA 2000Public Address AmplifierHSN: 85437099 |
| 88 | Yamaha MG16XU 16 Channel Analog MixerHSN: 85437022 |
| 89 | Marantz NR-1510 (Black)5.2 Channel AV ReceiverHSN: 85279990 |
| 90 | Motorised Projector Screen16:9 Ratio Motorised Projector Screen 200\\" Full HD 4k compatible.HSN: 90106000 |
| 91 | Benq TK 700 With Standard Accessories HSN: 85286900 |
| 92 | Mipro Dual Wireless MicDual Wireless Mic System AC-312 (3 Set dynamic handhel mic)HSN: 85181000 |
| 93 | Audio Technica PRO 49QL + AT8668sCardioid Condenser Quick-mount GooseneckHSN: 85183000 |
| 94 | CablesSpeaker wire,HDMIHSN: 85441990 |
| 95 | Setup & Installation ChargesNo. of Visits: 1No. of Technicians: 2 Draughtsmen Man- hours: 16SAC: 998739 |
| 96 | Auditorium 3 |
| 97 | DNM D-820TIndoor/Outdoor SpeakerHSN: 85182200 |
| 98 | DNM PA 2000Public Address AmplifierHSN: 85437099 |
| 99 | Yamaha MG16XU 16 Channel Analog MixerHSN: 85437022 |
| 100 | Marantz NR-1510 (Black)5.2 Channel AV ReceiverHSN: 85279990 |
| 101 | Motorised Projector Screen16:9 Ratio Motorised Projector Screen 200\\" FULL HD 4KHSN: 90106000 |
| 102 | Benq TK 700 With Standard Accessories HSN: 85286900 |
| 103 | Mipro Dual Wireless MicDual Wireless Mic System ACT-312 (3 set dynamic handheld mic )HSN: 85181000 |
| 104 | Audio Technica PRO 49QL + AT8668sCardioid Condenser Quick-mount GooseneckHSN: 85183000 |
| 105 | CablesSpeaker wire,HDMIHSN: 85441990 |
| 106 | Setup & Installation ChargesNo. of Visits: 1No. of Technicians: 2 Draughtsmen Man- hours: 16SAC: 998739 Please Enable Macros to View BoQ information |
