|
| 1 | repairing and rewinding 1hp 2hp 3hp 3.5hp 5hp 7hp 7.5hp 10hp 12.5hp15hp 25hp 30hp and 60 hp boosterpump under prabhag samiti no 1 to 5 for the year 2026 2027 |
| 2 | Item No. 1 Rewinding of electric motor up to 1 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 3 | Item No. 2Rewinding of electric motor above 1 HP upto 2 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 4 | Item No. 3Rewinding of electric motor above 2 H.P. upto 3 H.P. three phase up to1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc.testing for the original speed and no load consumption with guarantee for one year |
| 5 | Item no. 4 Rewinding of electric motor above 3 H.P.upto 5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 6 | Item No. 5:-Rewinding of electric motor above 5 H.P. upto 7.5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 7 | Item no. 6- Rewinding of electric motor above 7.5 H.P. upto 10 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc.testing for the original speed and no load consumption with guarantee for one yea |
| 8 | Item No. 7 :-Rewinding of electric motor above 10 H.P. upto 12.5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 9 | Item No 8 Rewinding of electric motor above 12.5 H.P upto 15 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 10 | Item No 9 Rewinding of electric motor above 15 H.P. upto 20 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 11 | Item No 10 Rewinding of electric motor above 20 H.P. upto 25 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc.testing for the original speed and no load consumption with guarantee for one year |
| 12 | Item No 11 Rewinding of electric motor above 25 H.P. upto 30 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 13 | Item No 12 Rewinding of electric motor above 55 H.P. upto 60 H.P. three phase up to 1400 RPM |
| 14 | Item No 13 Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc.in provided distribution board. |
| 15 | Item No 14 Supplying, erecting and marking triple pole isolators only switch version of miniature circuit breaker of 63A with required wiring connections and lugs etc. in provided distribution board. |
| 16 | Item No 15 Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board. |
| 17 | Item No 16 Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 80/100A in provided distribution board. |
| 18 | Item No 17 Supplying & erecting directly operated Single phasing preventer complete erected and connected to supply to operate in case of single phasing with guarantee for minimum one year. |
| 19 | Item No 18 Supplying and erecting switch disconnector fuse (SDF) switch 415V, 25/32A, open execution, triple pole and neutral link AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part1/3 HRC - DIN type fuse, insulation voltage 1000 V for enclosing in panel with rotary handle for ON / OFF operation (without HRC fuse). |
| 20 | Item No 19 Supplying & erecting automatic control panel for 3 Ph, 415 volt, /centrifugal pump set up to 10 - 15 HP consisting of Star Delta starter having relay range 13- 22 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. |
| 21 | Item No 20 Supplying & erecting Fully Automatic Star/delta starter suitable for above 15 H.P. up to 25 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame |
| 22 | Item No 21 Supplying & erecting Fully Automatic Star/delta starter suitable for above 25 H.P. up to 35 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. |
| 23 | Item No 22 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V 2 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification no. CB-LT/AL |
| 24 | Item No 23 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 25 | Item No 24 Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V. 1 core 50 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CBLT/CU |
| 26 | Item No 25 Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V. 1 core 70 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel/distribution boards / pipe as per specification no. CBLT/CU |
| 27 | Item No 26 Providing earthing with galvanised iron plate size 60 x 60 x 0.6cm complete with all material, testing & recording the results as per specification no EA-EP |
| 28 | Item No 27 Supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and/ or any other propose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP |
| 29 | Item No 28 Providing and fixing mild steelgrill work for windows/ ventilators of 20 Kg/Sqm. as per drawings including necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting,etc.complete.(Bd-U-1/537) |
| 30 | Item No 29 Providingsecond class Burnt Brickmasonrywith conventional/ I.S. type bricks in cementmortar 1:6 in foundations andplinthof innerwalls/ inplinthexternalwalls includingbailingoutwatermanually , striking jointsonunexposed faces, rakingout joints on exposed faces and watering etc. Complete. |
| 31 | Item No 30 Providing and laying in situ CementConcrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) |
| 32 | G.S.T. 18% Please Enable Macros to View BoQ information |
