|
| 1 | Various electro-mechanical works at Ramnagar Rawate compound pumping station under AE(M)WWES-II. |
| 2 | IP 42 Wall/column Mounted distribution board with one Nos of 16A DP MCB as incomer and 4 Noss 6/10A SP MCB as outgoing (8way SPN DB) |
| 3 | ELCB with 30mA Sensitivity 40Amp. 2Pole |
| 4 | 25 x 25 x 3 mm of M.S.angle. |
| 5 | Cable End Termination For Aluminium Cables – 2C x 16 Sq.mm |
| 6 | Wiring for submains- casing n cap – 2 X 2.5 sq. mm+ 1 X 2.5 sq. mm earth wire in 20 x 12 mm(1/2 in) |
| 7 | Wiring for submains- casing n cap – 2 X 4 sq. mm + 1 X 4 sq. mm earth wire in 25 x 12 mm ( 3/4 in) |
| 8 | Light /Fan / Ex. fan Points with Modular switches & FRLSH wires |
| 9 | 3/5 Pin Independent Plug (IP) with Modular switches & FRLSH wires |
| 10 | 15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch |
| 11 | Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25x3 GI strip/ / 2X8SWG G.I. wire up to chamber (wire or strip size as per fault level), disconnecting links with 600 x 600 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts. Bentonite/ Charcol & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope |
| 12 | Earthing Continuity Conductors -25 x 6mm GI |
| 13 | Outdoor LED Street Light fittings –100-120 W |
| 14 | Single Arm Bracket of 1000mm length |
| 15 | Providing & fixing in position 35 mm thick 1st quality water proof Single Leaf Flush Door for w.c. with 1.5mm thick laminate on both sides with 12x35mm lipping patti on all egdes. Rate is inclusive of s.s.fixtures & fittings, such as handles on both sides, tower bolts, locking arrangement,, door stopper of make (ozone, Hettich,Hafle ) 450 x 150mm aluminum ventilation grill powder coated, as per architect's detailed drg.and design complete.Size of door 950mm x 2.35mm. |
| 16 | Frame Type F2Providing and fixing 1st quality Burma T.W. door frame of size 75 x 150mm with required groove and chamfer including M.S.hold-fast of size and make. Door Type D5-ED as per architect's detailed drg. And design and as instructed by the Engineer-in-charge. |
| 17 | Providing and Fixing MS Safety grill of weight specified below for windows as per design including fabricating the grill using M.S.square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc complete as directed. Grill weighing 25 to 30 kg / sqm |
| 18 | Providing and fixing in position two track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 61.85 mm x 45.5 mm x 1.3 mm thk (wt 1.055 kg/Rm) for bottom, 61.85 mm x 31.75 mm x 1.3 mm thk. (wt 0.659 kg/Rm) for top & sides, mounted on anodized aluminum rectangular frame of size 63mm x 38mm x 2.0mm(1.054). The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26,7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories |
| 19 | Providing & fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings. The FRP chajja should be manufactured using unsaturated Polyester resin as per IS:6746, duly reinforced with fibre glass chopped stand mat (CSM) as per IS:11551 complete with protective gel coat U/V coating on top for complete resistance from the extreme of temperature, weather and sunlight.Window 3 x 1.50+0.15 x 0.75Door 1 x 1.50+0.15 x 0.75 |
| 20 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, compete. Please Enable Macros to View BoQ information |
