Tender For Annual Maintenance Of Internal Road In Sector-21, Rohtak. Providing And Laying Busg, 20 Mm Premix, 30 Kg Tack Coat, And Seal Coat Type B For Patchwork In Internal Roads Of Sector-21, Rohtak, And Clearing Jungle, Including Uprooting Of Rank, Kalanaur-Haryana
TDR : 55337104
Tender Notice
BOQ
Expired
Kalanaur
Haryana
Tender For annual maintenance Of Internal Road In Sector-21, Rohtak. Providing And Laying Busg, 20 Mm Premix, 30 Kg Tack Coat, And Seal Coat Type B For Patchwork In Internal Roads Of Sector-21, Rohtak, And Clearing Jungle, Including Uprooting Of Rank
Name of Work:- A/mtc. of Internal Road in Sector-21, Rohtak. Providing and laying BUSG, 20 mm premix, 30 kg tack coat, and seal coat type `B` for patchwork in internal roads of Sector-21, Rohtak, and clearing jungle, including uprooting of rank vegetation and grass, and disposal of building rubbish/malba/similar unserviceable, dismantled, or waste materials at various places from road berms in Sector-21, Rohtak. { - DNIT No.-156087} A/c Rs. 1.97 Lacs E/M Rs. 3940/- Time Limit: One (01) Month
Sl. No.
Item Description
1
[17.23.3]Water Bound Macadam Grading - II 3. Water Bound Macadam – I & II with crushable screenings Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications
2
[17.25.1]Prime Coat @ 0.85kg per sqm 1. Prime Coat @ 0.60kg per sqm Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per technical clause 503 of MORT&H specifications
3
[17.50]Patch Work with close graded Premix Surfacing/Mixed seal Surfacing 20 mm thickness (Type B) Providing and laying patch work with close graded premixed surfacing material of 20 mm thickness Type B using penetration grade Bitumen VG - 10 @ 1.9 kg per sqm and crushed aggregates of specified grading after trimming the pot holes, removal of failed material, including mixing in a continuous type of HMP, carriage of mixed material and rolling with a smooth wheeled roller to match the adjoining surface complete as per technical clause 508 of MORT&H specifications
4
[17.51]Patch work Seal coat Type B Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications.
5
[4.1]Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
6
[5.70]Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.