|
| 1 | B & R Division Items |
| 2 | Dismantling of old rusted pressed steal tank of capacity of 24KL complete all as specified and directed by Engr-in-Charge |
| 3 | Supply, hoisting, installing and connecting of pre-fabricated HOT press Moulded sheet, sheet moulding compound (SMC) panel tank in size of 4m X 3m X 2m having capacity 24KL on existing/new structure tank resting on ISMB & ISMC, capacity laid over sintex pre-fabricated HDG grillage (Hot deep galvanized) channels and SMC panel tank consisting with closed topical nipple for inlet, outlet overflow and washout connection confirming it IS-12701-96 including external FRP ladder for clambing for cleaning also fixing PTMT 100mm dia ball including all fittings also RCC plith/beam all civil work including and drainout for overflow and darin out water all work as per OEM specification and directed by Engr-in-Charge. Make: Sintex, sovisy, HP Engineers (NEERCO)Note (i) The contractor shall be provide the load bearing report of existing iron frame structure from any recoginized/Govt approved antionalised institue before installation of New tank on it and the cost for the same will be born by the Contractor.(ii) All Civil work as per drawing providng by OEM including quaoted rate.(iii) All welding work including this job as per OEM specification as per drawing |
| 4 | Material & labour for erection and fabrication of rolled MS Joint Channel, angle or tee section fixed indepenently without connecting plates etc (cut to ordianry length i e within 20mm of length indicated) confirming to FE-410W (gde-E-250 quality-B) complete all as per site requirment specified and directed by Engr-in-Charge. |
| 5 | M&L Steel Tubes, 'Medium grade', 80 mm dia galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange incl welding etc.); laid in trenches all as specified and directed |
| 6 | M&L Steel Tubes, 'Medium grade', 50 mm dia galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange incl welding etc.); laid in trenches all as specified and directed |
| 7 | Supply & fixed of butterfly valve (water Type), PN-1.6 with SS-304 Disc, Body S G. Iron, lever operated. Nitrile/EPDM Rubber lining of size 50 mm suitable for inlet and outlet Gl pipe of filtration plant Including taking out old unserviceable butterfly valves complete all as specified and directed. |
| 8 | Supply fixing and testing sluice valve cast iron body, class PN 1.6, ISI marked conforming to IS-14846 complete suitable for 80 bore pipe with flanged ends duly drilled, brass spindle, Cl gate with brass rings and iron wheel head, including taking out and disposing off old unsv sluice valves complete all as specified and as directed. |
| 9 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, not exc 10 sqm on plan and not exe 1.5 m in depth and getting out soft / loose soil complete all as specified and directed. |
| 10 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exec 25 cm complete all as specified and directed. |
| 11 | Removing excavated material not exe 50 m and depositing where directed at a level n. exc 1.5 m above starting point complete all as specified and directed. |
| 12 | M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) foundation filling and mass concrete complete all as specified and directed. |
| 13 | M&L for brick works with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius in cement mortar 1:4 complete all as specified and directed. |
| 14 | M&L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 15 | Material labour and fribricated Water level indicator fixed at various location along Angle iron ISA 4040, 3mm thick - 7 RM, MS plate 3mm thick 10 cm wide- 3mtr, stainless rope 5mm dia with MS pully - 15mtr, PVC float ball 150mm dia - 1 no, Arrow shaped weight marker for water level indicator fabricated from 100mm X 10mm thick MS flat of length 100 mm duly welding on angle over head tank painted with two coats of white colour sythetic emabmel paint over a top of rex oxide primer after that Painting two coats of black paint over a coat of red oxide and marking the water level as per the OH Tank capacity all as per specification as per direction by Engr-in-Charge Please Enable Macros to View BoQ information |
