|
| 1 | Material and labour for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash including cornices etc complete all as specified and as directed. |
| 2 | All as per item No. 1 here-in-before but on ceiling complete all as specified and directed |
| 3 | Material and labour for preparation of old plastered wall surfaces and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 4 | Material and labour for preparation of old plastered surfaces of waiis and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 g/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified as directed. |
| 5 | Material and labour for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 6 | Material and labour for preparation of old treated steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 7 | Material and labour for preprattion of old plastered surfaces of walls by washing brushing/ rubbing down and applying one coat of cement base paint complete all as specified and directed |
| 8 | Material and labour writing or figures (BLOCK ROMAN, ITALIC OF INDIAN) n.exc 30cm (height of letter 7cms) complete all as specified and directed |
| 9 | Material and labour stops, commas, short lines, dashes, hyphen brackets etc complete all as speicifed and directed |
| 10 | Taking down cement plastering any description on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 11 | Material and labour rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement platsr 1:6 finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 12 | Material and labour rendering 15mm thick in CM 1:4 with WPC on fair faces of brick work or concrete surfaces incl finished even and smooth without using extra cement complete all as specified as directed.Note :- WPC shall be measured and paid separately. |
| 13 | Supply only liquid water proofing compound complete all as specified and directed |
| 14 | Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant primer including 3mm wall care putty complete all as specified and directed. |
| 15 | Material and labour for preparation of new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50g/ltr and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified as directed. |
| 16 | Removal of vegetation /grass etc including cutting holes into a through brick walls/concrete and removal of small trees/woods etc and making good disturebed surfaces with cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregete complete all as specified and directed |
| 17 | Cleaning/uprooting of vegetation /small trees, muds,garbages,waste etc growth on inaccessible RCC roof , AC sheet roof, below wind tie, cleaning of AC sheet/CGI sheet,valley gutter and shaft portion of wall surfaces , back side of toilet portion complete all as specified and directed |
| 18 | Dismantling single layer mangalore pattern or similar tiles in roofing incl removal of vegitation nails etc complete all as specified and directed |
| 19 | Material and labour for roof tiles, mangalore pattern, interlocking at side joints, laid dry with any height of roof , incl necessary scaffolding etc complete all as specified and directed |
| 20 | All as per above Item No 3 here-in-before but except tiles ( refixing in existing tiles ) complete all as specified and directed |
| 21 | Material and labour ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete as in repair complete all as specified and directed |
| 22 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 23 | Supply and fix pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to all, fixed with self tapping screws except sheeting (any thickness) all as specified . |
| 24 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) with MS frames or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 25 | Supply and fix in gypsum board 12mm thick in false ceiling fixed with screw as per manufacturers instructions complete all as specified and directed . (Note :- Frame work & hangers for ceiling shall be measured and paid separately) |
| 26 | Supply and fix anodised aluminium snap grid frame work for false ceiling with size of grid 605x605mm complete all as specified and directed . |
| 27 | Supply and fix for light coloured hollow PVC wall pannelling of minimum 1.0mm tks with with necessary frame work with necessary fixtures fixed with necessaet frame works incl securing frame work and grid shall be provided as per Room Size requirement incl all fittings complete all as specified and directed . |
| 28 | Taking down eaves gutters and rainwater pipes, drain pipes etc (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., complete all as specified and directed |
| 29 | Supply and fix PVC (SWR or drain ) pipes, single socketed, in any length, with rubber rings 110mm bore fixed with necessary clamps complete all as specified and directed |
| 30 | Supply and fix PVC (SWR or drain ) pipes, single socketed, in any length, with rubber rings 75mm dia bore fixed with necessary clamps complete all as specified and directed |
| 31 | Supply and fix in repair 100mm to 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed . |
| 32 | Supply and fix in repair 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed . |
| 33 | Supply and fix in repair PVC (SWR) floor trap upto 75mm outlet , plain with grating including jointing with solvent cement including set with C M ( 1:4 ) complete all as specified and directed |
| 34 | Supply and fix in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed . |
| 35 | Supply and fix in repair to vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed |
| 36 | Supply and fix in repair to vitreous china wash down water closet pan (European type) with P or S trap, snow white or white colour, fixing bolts, in cluding connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, excluding flushing cistern and flush pipe including seat cover as in repair complete all as specified and directed |
| 37 | Supply and fix in repair to vitreous china wash hand basin white flat back of size 550x400 mm ,including brackets,waste coupling and waste pipe , or fixed with existing plateform surfaces with sealent with white cement etc complete all as specified and directed. |
| 38 | Supply and fix in repair to half stall urinal vitreous china urinals, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 39 | Taking down & Fixing in same postion only with repair to any type of vitreous china urinals (Urinal, bowl type or half stall pattern,) basin only including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed. |
| 40 | Supply and fix in repair to 10 litres, cast iron, valveless. syphonic action type, flushing cistern, high level, with inlet, ball valve, float, chain and pull, and brackets IWC/EWC OR Angilo Indian type inclusive of brackets , and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed |
| 41 | Supply and fix in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed . |
| 42 | Supply and fix in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed |
| 43 | Supply and fix in repair of PVC connections 15mm size with PTMT nuts of length 600mm long complete all as specified and directed |
| 44 | Supply and fix in repair to grating round 140 mm size of PTMT (minimum weight 50gms) complete all as specified and directed |
| 45 | Supply and fix in repair to to plastic water closet seat cover for EWC /Angilo indian type , black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ccomplete all as specified and directed . |
| 46 | fixing only in repairs Joint between fluslhing pipe and socket of W.C. pan; pre-made complete all as specified and directed . |
| 47 | Repair only in High or low level fluslhing cistern with replacement of necessary washers ,push etc , and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed . |
| 48 | Fixing only in repairs in existing wash down water closet EWC (pedestal pattern) with necessary white cement , fixing with bolt washers etc , complete all as specified and directed |
| 49 | Supply and fix in repair to health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 50 | Supply and fix in sealing for ( M seal with adhesives ) metal area n exe 3 Sqcm, sheets bottom surface in roof , water tank , sheet , cladding gaps filling etc for arresting water complete all as specified and directed . |
| 51 | Supply and fixin repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 52 | Supply and fix in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 53 | Supply and fix in repair to fancy type mordern stainless steel plate rack utensils dish rack ) of size upto 750x750x250mm complete all as specified and directed . |
| 54 | Supply and fix in repair of 20mm bore of CPVC pipes to fittings in trenches/walls/ceiling concealed in wall etc including Elbow, Tee,Socket, Reducer,Bushing,Step over head bends, End cap, End pugs ,union ,tank nipple ,etc also included in special fittings of ( brass theating) ,male , female treads , adapters , tee & Reducers etc also making Suitable size of brass treaded to make a Complete Fittings of CPVC to match the CP/PTMT plumbing fittings as per std size also CPVC pipes shall be UV Stable, leak proof, tough, rigid and suitable for internal and external water supply applications incl CPVC yellow solvent cement to be used for pipe & fittings etc complete all as specified and directed |
| 55 | All as item no 36 here-in-before but 25mm bore pipe complete all as specified and directed . |
| 56 | Supply and fix in repair to CP 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 57 | Supply and fix in repair to 15mm bore CP fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed |
| 58 | Supply and fix in repair to fancy type 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 59 | Supply and fix in repair to 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed |
| 60 | Supply and fix in repair to 15mm bore swan neck type sink tap fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed . |
| 61 | Supply and fix in repair brass spindle and removing leakage of water for bib tap/pillar tap- stop cock15mm/20mm bore pipe complete all as specified and directed . |
| 62 | Supply and fix to 20mm long handle CPVC ball valve for 20 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent complete all as specified and directed . |
| 63 | Supply and fix to 16mm CPVC ball valve for 15 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent complete all as specified and directed . |
| 64 | Supply and fix in repair to swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed |
| 65 | Supply and fix in repairs towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed |
| 66 | Taking down and refixing with repair in existing Wash basins any type , vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed . |
| 67 | Supply and fix in repair in 32mm bore waste coupling with waste pipe of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) for HWB ,Sink , etc complete all as specified and directed |
| 68 | Supply and fix in repair to Soap dish, vitreous china white or PTMT , approximate size 160x 160x90mm complete all as specified and as directed. |
| 69 | Supply and fix in repair to CP urinal spreader of size 180mm x 142mm x 73mm for fixing with 15 mm dia to 20mm dia pipe complete all as specified and directed |
| 70 | Cleaning and preparing the surfaces of MS steel section and welding in repairs upto metal 10mm thickness with all necessary cleants,welded together in brocken sections with necessary repairs complete all as specified and directed |
| 71 | Supply and fix in powder coated anodised aluminium sliding type window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed |
| 72 | Supply and fix in powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed |
| 73 | Repairs only in aluminium windows of area n.exe 1.0 sqm in each shutter of any type incl replacement of beading, hinges, bolts,handles etc as per existing type and refixing the same opening complete all as specified and directed |
| 74 | Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 75 | Supply and fix Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. complete all as specified and directed. |
| 76 | Material and labour for non-skid ceramic tiles, coloured (of approved shade and design), 7 to 8mm thick, of superior quality, square / rectangular 300mmx300mm x6mm tk (area exceeding 0.06 Sqm but not exceeding 0.11 Sqm) , as in floors, etc ( with epoxy filling with 2mm spacers bar ) .set and jointed in neat cement slurry and pointed with colouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and as directed |
| 77 | Material and labour for glazed ceramic tiles, coloured (light colour as approved), of size 300x 600 x7mm/ 350x250mm x 7mm / 450X 350X 7mm x300mmx200mmx7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed |
| 78 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry beded in any mortor complete all as specified and directed |
| 79 | Material and labour for granite tiles 18- 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar (1:6) complete all as specified and directed |
| 80 | Taking down shutters exe 1 Sqm not exe 2 Sqm each and refixing with same opening after resecuring or easing &adjusting /cutting with a required repair complete all as specified and directed |
| 81 | Taking down shutters not exe 1 Sqm each and refixing with same opening after Resecuring or easing &adjusting /cutting with a required repair complete all as specified and directed |
| 82 | Taking down chowkats or frames exc 1.5 sqm and n.exc 4 Sqm each with shutter (without taking off shutter) incl windows , doors fixed portion etc complete all as specified and directed |
| 83 | Material and labour Plain solid, straight chowkats and frames of second class hard wood Wrought Framed rabatted on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 84 | Taking down shutters exceeding 1.0 Sqm but not exe 2 Sqm each complete all as specified and directed |
| 85 | Material and labour factory made 30 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed |
| 86 | Material and labour second class hardwood 30mm tk Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed |
| 87 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing . M.S. stay shall be provided at the bottom to steady the frame as in repair ( incl taking Down u/s old PVC /UPVC/FRP Door shutters ) , complete as specified by the manufacturer and complete all as specified and directed |
| 88 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame incl necessary handles on both side and Towert bolts in Each side all as per specification and drawing complete all as specified and directed |
| 89 | Material and labour 18-19mm thick pre-laminated particle board ( incl dismantling ), flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter , shelves etc including 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side and french polishing to edging complete all as specified and directed |
| 90 | Supply and fix 300mm long (length of bolt in mm) aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 91 | Supply and fix in repair 300mm long (length of bolt in mm) aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 92 | Supply and fix in repairs 100mm long (length of bolt in mm) aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 93 | Supply and fix 100mm long (length of bolt in mm) aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and directed. |
| 94 | Supply and fix in repair 75mm long (length of bolt in mm) aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 95 | Supply and fix in repairs 150mm (size of handle in mm) aluminium handles, cast type, anodised complete all as specified and directed |
| 96 | Supply and fix 100mm (size of handle in mm) aluminium handles, cast type, anodised complete all as specified and directed |
| 97 | Supply and fix in repairs 75mm aluminium handle ,cast type anodised complete all as specified and directed |
| 98 | Supply and fix 100mm butt hinges(Size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed all as specified complete all as specified and directed |
| 99 | Supply and fix 75mm butt hinges(Size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed all as specified complete all as specified and directed |
| 100 | Supply and fix hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed |
| 101 | Supply and fix in repair hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed |
| 102 | Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed |
| 103 | Supply and fix in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.etc incl for aluminium window / doors etc complete all as spd |
| 104 | Hacking out old broken glass (any thickness, size, quality) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed |
| 105 | Material and labour 4 mm thick sheet glass of selected quality in squares and not exceding 0.5 Sqm in each pane fixed with necessary beadings or fixed with tracking section along with beadings . Gaskets etc complete all as specified and directed |
| 106 | Material and labour 2 nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc..and removing old beads to Store complete all as specified and directed |
| 107 | Supply and fix in repair to 20mm dia powder coated aluminium Curtain Rod fixed with brackets , Knobs ,finial of 2 pieces ( Each side ) with necessary screews , plugs etc as in repair complete all as specified and directed . |
| 108 | Supply and fix in repair to MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed and as directed |
| 109 | Supply and fix in repair aluminium extruted body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed and as directed by Enginee in Charge |
| 110 | Supply and fix in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm cover plate fixed in floor as in repair complete all as specified and directed and as directed by Enginee in Charge |
| 111 | Demolition of unreinforced cement concrete of any description complete all as specified and directed |
| 112 | Material and labour plain cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate in roof and parapet wall junction ,post holes filling , roof/chajja benching, kerbs, mud stop, coping, rounded or chamfered on edges, filling rails embedded sec ,hold fast etc including form work complete all as specified and directed by Engineer in Charge |
| 113 | Demolition of brick work/solid block work built in cement mortar including all quoins, pillars etc.complete all as specified and directed |
| 114 | Material and labour providing PCC solid blocks exc. 10cm in width type C1 1:3:6, 20mm graded aggregate and setting in cement mortar 1:6 complete. complete all as specified and directed |
| 115 | Taking down cement plastering any description on brick on stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 116 | Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed |
| 117 | Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement complete all as specified and directed |
| 118 | Material and labour distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work well finshed complete all as specified and directed |
| 119 | Material and labour finishing walls with acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed |
| 120 | Preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 121 | Applying grasing / oiling and alinging in existing steel rolling shutters in any height and width with smooth Workable/rolling conditions as in rolling shutters without takking off shutters complete all as specified and directed |
| 122 | Removal of vegetation /grass etc including cutting holes into a through brick walls/concrete and removal of small trees/woods etc and making good disturebed surfaces with cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregete complete all as specified and directed |
| 123 | Cleaning/uprooting of vegetation /small trees, muds,garbages,waste etc growth on inaccessible RCC roof , Ac sheet roof, below wind tie, cleaning of AC sheet/CGI sheet,valley gutter and shaft portion of wall surfaces , back side of toilet portion complete all as specified and directed |
| 124 | Note :- All minor complaints will attn by daily ( day to day ) basis & major complaints to be finalised for weekly basis. Every complaints will assign for as per direction of Engineer in Charge so Contractor shall be depolyed an empoyee for attenting daily basis complaints. Failure to attend complaints will result in non-attendnce panality for each complaints is applicable as per rules . Please Enable Macros to View BoQ information |
