|
| 1 | Scarifying or picking Gravelled Macadam or Bituminous Macadam surfaces in area n.exc 400 Sqm and exc 50 mm and not exc 100 mm deep complete all as specified and as directed. |
| 2 | M&L 150 mm thick (compacted thickness) WMM laid in two equal layers each 75mm thick (compacted thickness) using approved stones aggregate of grading -2(90mm to 40 mm ) size, spread, watered rolled and consolidated to required gradient and camber with 8 to 12 tonne power road roller etc complete all as specified & directed. |
| 3 | M&L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre of paving bitumen (VG-10) complete all as specified and directed. |
| 4 | M&L for premixed bituminous macadam with 4% binder paving bitumen (VG-30) content by wt. of total mix laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm thickness or less, and rolled with power roller 8 to 10 Ton complete all as specified and directed. Note:- Job Mix formula as per MORTH Specification shall be got done from the accredited Govt's approved lab and cost there on shall be born by the contractor. Bitumen content indicated in description shall be minimum however actual requirement of bitumen binder in plus side shall be as per Job Mix formula. Work shall be executed after approval of Job Mix formula by GE. |
| 5 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces using heavy duty air compressors to remove all loose dirt etc complete all as specified and as directed. |
| 6 | M&L for applying evenly a priming/tack coat with bituminous primer @ 05 Kg/10 Sqm over existing surfaces using paving bitumen VG-10 by mechanical sprayer etc complete all as specified and directed. |
| 7 | M&L for 40mm thick (Consolidated thickness) bituminous premixed Semi Dense Asphaltic Concrete(SDAC) with 5.5% binder content (VG-30) by weight to total mix, Mixed in automatic hot mix plant, laid by using self propelled mechanical paver, rolled and compacted to required camber and gradient with 8 to 12 tonne capacity power roller to a uniform smooth surface complete all as specified and as directed.Note:- Job Mix formula as per MORTH Specification shall be got done from the accredited Govt's approved lab and cost there on shall be born by the contractor. Bitumen content indicated in description shall be minimum however actual requirement of bitumen binder in plus side shall be as per Job Mix formula. Work shall be executed after approval of Job Mix formula by GE. |
| 8 | M & L for preparing bituminous surfaces of road and marking 2.0 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 9 | S & F in repair solar cat eye aluminium alloy (100 % water proofing design according to 65) of size 125 mmx125 mmx25 mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10000 to 18000 mcd completed all as specified and directed |
| 10 | S & F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed |
| 11 | S&F in repair \\"Sparkle road side delineators with tri colour reflector and 150mm wide reflectro radium sticker pasted over painted MS pipes approx 100mm dia and 100 cm long fixed in cement concrete bedding 150mmx150mmx300mm, 1:3:6 type C-1 (using 20 mm graded aggregate incl necessary earth work complete all as specified. |
| 12 | S&F in repair Road safety poly carbonate convex mirror 100cm dia encased in ABS materials, orange colour for outdoor installation including 3.0m long and 75mm dia MS pipe as stand, fixed to ABS frame with proper fixing arrangement (Stand painting with two coats of synthetic enamel paint over one coat of red oxide primer fixed on ground in PCC block of size 45x45x50cm of PCC 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) and including necessary excavation earth work and removal of soil to a distance n. exc. 50m complete all as specified and as directed. |
| 13 | S&F in repair plastic speed bumb of ABS material speed breaker/rubber rumbler of size L 250mmxW 500 mmxH 50 mm fixed with metallic bolt of suitable size embedded in epoxy as per manufacturer’s instructions complete all as specified and directed.Note:- Holes in road shall be drilled with drill machine and necessary cleaning of hole shall be done with blower prior to install the road stud. |
| 14 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cmthick, spread, levelled and rammed including watering etc complete all as specified and directed. |
| 15 | Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 16 | M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 17 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor 100 mm thick surface finished even and smooth complete all as specified and directed. |
| 18 | M&L for Pre Polished Chequered cement concrete tiles of size 200 mm x 200 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and pigment, including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
